SMC Networks SMCDPCR-AP User manual

38 Tesla

Irvine, CA 92618

Phone: (949) 679-8000

SMCDPCR-AP

802.11b/g Cradle Access Point

User Guide

November 2006

Revision Number: R01 V.1.0.3.8

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC for its use, nor for any infringements of patents

or other rights of third parties which may result from its use. No license is granted by

implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to

change specifications at any time without notice.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

Trademarks:

SMC is a registered trademark; and EliteConnect is a trademark of SMC Networks, Inc. Other

product and company names are trademarks or registered trademarks of their respective

holders.

Two-Year Warranty

Two-Year Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be

free from defects in workmanship and materials, under normal use and service, for the

applicable warranty term. All SMC products carry a standard (2) Year limited warranty

from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own

discretion, repair or replace any product not operating as warranted with a similar or

functionally equivalent product, during the applicable warranty term. SMC will endeavor to

repair or replace any product returned under warranty within 30 days of receipt of the

product. Registration can be accomplished online via the SMC web site. Failure to

product for two years from the original date of purchase. As new technologies emerge,

older technologies become obsolete and SMC will, at its discretion, replace an older

product in its product line with one that incorporates these newer technologies.

All products that are replaced become the property of SMC. Replacement products may

be either new or reconditioned. Any replaced or repaired product carries either a 30-day

limited warranty or the remainder of the initial warranty, whichever is longer. SMC is not

responsible for any custom software or firmware, configuration information, or memory

data of Customer contained in, stored on, or integrated with any products returned to

SMC pursuant to any warranty. Products returned to SMC should have any

customer-installed accessory or add-on components, such as expansion modules,

removed prior to returning the product for replacement. SMC is not responsible for these

items if they are returned with the product. Customers must contact SMC for a Return

Material Authorization number prior to returning any product to SMC. Proof of purchase

may be required. Any product returned to SMC without a valid Return Material

Authorization (RMA) number clearly marked on the outside of the package will be

returned to customer at customer’s expense. For warranty claims within North America,

please call our toll-free customer support number at (800) 762-4968. Customers are

responsible for all shipping charges from their facility to SMC. SMC is responsible for

return shipping charges from SMC to customer.

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS

WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR

REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE

FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN

LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,

EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE,

INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR

AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE

OR USE OF ITS PRODUCTS. SMC SHALL NOT BE LIABLE UNDER THIS

WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THE ALLEGED

DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY

CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER

INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR

ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY

ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY:

IN NO EVENT, WHETHER BASED IN CONTRACT OR TORT (INCLUDING

NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL,

INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS

OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING

OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,

MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS

PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT

ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS,

SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY

FROM STATE TO STATE. NOTHING IN THIS WARRANTY SHALL BE TAKEN TO

AFFECT YOUR STATUTORY RIGHTS.

* SMC will provide warranty service for 90 days following discontinuance from the

active SMC price list. Under the two-year warranty, internal and external power

supplies, fans, batteries, power chargers, and cables are covered by a standard

90-day warranty from date of purchase.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

Compliances

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected

• Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance

of 20 centimeters (8 inches) between the radiator and your body. This transmitter must

not be co-located or operating in conjunction with any other antenna or transmitter.

The antenna(s) used for this transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to

channels 1 through 11.

Canada RSS Statement

This Class B digital apparatus complies with Canada RSS-210.

Cet appareil numérique de la classe B est conforme à la norme CNR-210 du Canada.

Japan VCCI Class B

Taiwan DGT (NCC)

根據交通部低功率管理辦法規定：

第十二條　經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅

自變更頻率、加大功率或變更原設計之特性及功能。

第十四條　低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象

時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信

法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫

療用電波輻射性電機設備之干擾。

EC Conformance Declaration

Marking by the above symbol indicates compliance with the Essential Requirements of

the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the

following conformance standards:

• EN 60950-1 (IEC 60950-1) - Product Safety

• EN 300 328 - Technical requirements for 2.4 GHz radio equipment

• EN 301 489-1, EN 301 489-17 - EMC requirements for radio equipment

• EN 50385 - The Compliance of Radio Base Stations and Fixed Terminal Stations for

Wireless Telecommunication Systems with the Basic Restrictions or the Reference

Levels Related to Human Exposure to Radio Frequency Electromagnetic Fields (110

MHz - 40 GHz)

This device is intended for use in the following European Community countries:

Requirements for indoor vs. outdoor operation, license requirements and allowed

channels of operation apply in some countries as described below:

• In Italy the end-user must apply for a license from the national spectrum authority to

operate this device outdoors.

• In Belgium outdoor operation is only permitted using the 2.46 - 2.4835 GHz band:

Channel 13.

• In France outdoor operation is only permitted using the 2.4 - 2.454 GHz band: Channels

1 - 7.

• Austria • Belgium • Denmark

• Finland • France • Germany

• Italy • Luxembourg • Netherlands

• Norway • Spain • Sweden

• Switzerland • United Kingdom • Portugal

• Greece • Ireland • Iceland

iii

Table of Contents

Chapter 1: Introduction 1-1

Package Checklist 1-1

Hardware Description 1-2

Wi-Fi Phone Cradle 1-3

LED Indicators 1-3

Ethernet Port 1-3

Power Socket 1-4

Reset Button 1-4

Chapter 2: Hardware Installation 2-1

Chapter 3: Initial Configuration 3-1

Connecting to the Web Interface 3-1

Management Access Through a Wireless Connection 3-2

Changing a PC’s IP Address 3-2

Logging into the Web Interface 3-4

Using the Setup Wizard 3-6

Chapter 4: System Configuration 4-1

Information 4-3

System 4-3

Client 4-4

Network 4-5

Event Log 4-6

System Settings 4-7

Administration 4-7

Reboot System 4-8

Wireless VAP Settings 4-9

Basic 4-9

Channel Setting 4-10

WEP Security 4-11

WPA-PSK Security 4-12

Network Settings 4-14

DHCP Client 4-14

DHCP Server/NAT 4-15

PPPoE 4-16

Time and Log 4-17

Contents

Updating Firmware 4-18

Upgrade via the Web Page 4-18

Upgrade via a Remote Server 4-19

Appendix A: Troubleshooting A-1

Diagnosing Access Point Indicators A-1

Wireless Connection Problems A-1

Appendix B: Cables and Pinouts B-1

Twisted-Pair Cable Assignments B-1

10/100BASE-TX Pin Assignments B-1

Straight-Through Wiring B-2

Crossover Wiring B-2

Appendix C: Specifications C-1

Glossary

Index

1-1

Chapter 1: Introduction

The SMCDPCR-AP is an IEEE 802.11b/g (Wi-Fi) access point that provides a

quality wireless Voice over Internet Protocol (VoIP) service for Wi-Fi phones, and

high-speed data communications between the internet and other 802.11b/g mobile

devices. The SMC Cradle Access Point also includes a cradle for charging an SMC

Wi-Fi phone.

The access point software provides two “virtual” wireless interfaces that can be used

to separate different types of network traffic. Both wireless interfaces provide

gateway functions, such as a DHCP server and Network Address Translation (NAT),

that route data from wireless clients to the wired network. In addition, the access

point offers full network management capabilities through an easy-to-use web

interface.

Package Checklist

The SMC Cradle Access Point package includes:

• SMCDPCR-AP Cradle Access Point

• RJ-45 Category 5 network cable

• AC power adapter

• Quick Installation Guide

• Management Guide CD

Inform your dealer if there are any incorrect, missing or damaged parts. If possible,

retain the carton, including the original packing materials. Use them again to repack

the product in case there is a need to return it.

Introduction

1-2

Hardware Description

Front Panel

Back Panel

Ethernet Port DC-IN Power Socket Reset Button

Other manuals for SMCDPCR-AP

This manual suits for next models

Table of contents

Other SMC Networks Wireless Access Point manuals

SMC Networks

SMC Networks 2655W FICHE User manual

SMC Networks

SMC Networks EZ CONNECT SMC2755W User manual

SMC Networks

SMC Networks ElliteConnect SMC2888W User manual

SMC Networks

SMC Networks EliteConnect SMC2555W-AG2 User manual

SMC Networks

SMC Networks EliteConnect SMC2555W-AG User manual

SMC Networks

SMC Networks 2655W FICHE User manual

SMC Networks

SMC Networks E21011 User manual

SMC Networks

SMC Networks EliteConnect WAP5110 User manual

SMC Networks

SMC Networks EliteConnect SMC2891W-AG User manual

SMC Networks

SMC Networks EZ Connect SMCWEB-N User manual

SMC Networks

SMC Networks SMCWEBS-N User manual

SMC Networks

SMC Networks WAP5110 User manual

SMC Networks

SMC Networks EliteConnect SMCE21011 User manual

SMC Networks

SMC Networks SMC2890W-AN Programming manual

SMC Networks

SMC Networks WAP3110-L User manual

SMC Networks

SMC Networks EliteConnect SMC2555W-AG User manual

SMC Networks

SMC Networks EZ Connect SMC2655W User manual

SMC Networks

SMC Networks SMC2552W-G2 User manual

SMC Networks

SMC Networks 2682W FICHE User manual

SMC Networks

SMC Networks SMC8511WG User manual

SMC Networks

SMC Networks 2555W-AG2 User manual

SMC Networks

SMC Networks EZ Connect Turbo SMC2455W User manual

SMC Networks

SMC Networks EZ Connect User manual

SMC Networks

SMC Networks EZ Connect SMC2652W User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide