SMC Networks Barricade User manual

Cable/DSL Router

User Guide

The information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and

reliable. However, no responsibility is assumed by SMC for its use, nor for any

infringements of patents or other rights of third parties which may result from its use. No

license is granted by implication or otherwise under any patent or patent rights of SMC.

SMC reserves the right to change specifications at any time without notice.

SMC Networks, Inc.

6 Hughes, Irvine, CA 92618

-1-

Trademarks:

SMC is a registered trademark; and Barricade is a registered trademark of SMC Networks, Inc. Other

products and company names are trademarks or registered trademarks of their respective holders.

FCC Interference Statement:

This equipment has been tested and found to comply with the limits for a Class B digital

devicepursuanttoPart15oftheFCCrules. These limits are designed to provide reasonable

protection against radio interference in a commercial environment. This equipment can

generate, use and radiate radio frequency energy and, if not installed and used in accordance

with the instructions in this manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause

interference, in which case the user, at his own expense, will be required to take whatever

measures are necessary to correct the interference.

CE Declaration of Conformity:

This equipment complies with the requirements relating to electromagnetic compatibility,

EN55022/A1ClassB,andEN50082-1. This meets the essential protection requirements of

the European Council Directive 89/336/EEC on the approximation of the laws of the

member states relation to electromagnetic compatibility.

-2-

Table of Contents

Chapter 1 Introduction.................................................................................4

1.1 Functions and Features...................................................................4

1.2 Packing List....................................................................................5

Chapter 2 Hardware Installation..................................................................6

2.1 Panel Layout...................................................................................6

2.2 Installation Requirements...............................................................7

2.3 Procedure for Hardware Installation ..............................................8

Chapter 3 Network Settings and Software Installation.............................10

3.1 Make Correct Network Settings of Your Computer.....................10

3.2 Install the Software into Your Computers ....................................11

Chapter 4 Configuring the Barricade........................................................14

4.1 Startup and Log in........................................................................14

4.2 Status ............................................................................................15

4.3 Toolbox.........................................................................................16

4.4 Primary Setup ...............................................................................17

4.5 DHCP Server................................................................................19

4.6 Virtual Server................................................................................20

4.7 Special AP....................................................................................21

4.8 Access Control..............................................................................22

4.9 Miscellaneous Items .....................................................................23

Chapter 5 Print Server...............................................................................24

5.1 Configuring on Windows 95/98 Platforms...................................24

5.2 Configuring on Windows NT Platforms.......................................26

5.3 Configuring on Windows 2000 Platforms ....................................27

5.4 Configuring on Unix-based Platforms .........................................28

-3-

Appendix A: Console Mode......................................................................29

Appendix B: TCP/IP Configuration for Windows 95/98 ..........................30

B.1 Installing TCP/IP protocol into your PC......................................30

B.2 Setting TCP/IP protocol to work with the Barricade...................31

Appendix C: Installation Guide For Specific ISP .....................................38

C.1 @Home........................................................................................38

C.2 MediaOne ....................................................................................39

-4-

Chapter 1 Introduction

Congratulations on your purchase of the Barricade. This product is specifically designed for

small office and home office needs. It provides a complete SOHO solution for Internet

surfing and for sharing office resources. Step-by-step instructions make installation easy.

Before installing and using this product, please take the time to read this manual for

complete operating information.

1.1 Functions and Features

lBroadband modem and IP sharing

-connects multiple computers to a broadband (cable or DSL) modem or an

Ethernet router to surf the Internet.

lAuto-sensingEthernetSwitch

-equipped with a 4-port 10/100Mbps auto-sensing Ethernet switch.

lVPN supported

-supports multiple PPTP sessions and allows you to set up VPN server and VPN

clients.

lPrinter sharing

-embeds a print server to allow all of the networked computers to share one

printer.

lFirewall

-allunwantedpacketsfromoutsideintrudersareblockedtoprotectyourIntranet.

lDHCP server supported

-all of the networked computers can retrieve TCP/IP settings automatically from

the Barricade.

lWeb-based configuring

-configurablethroughanynetworkedcomputer’s web browser using Netscape or

-5-

Internet Explorer.

lAccess Control supported

-allows you to assign different access right for different users.

lVirtual Server supported

-enables you to expose WWW, FTP and other services on your LAN to be

accessible to Internet users.

lUser-DefinableApplication Sensing Tunnel

-users can define the attributes to support the special applications requiring

multiple connections such as Internet gaming, video conferencing, Internet

telephony, et al. Then this product can sense the application type and open a

multi-port tunnel for it.

lDMZ Host supported

-allows a networked computer to be fully exposed to the Internet; this function is

used whenthe specialapplicationsensingtunnelfeatureisinsufficientto allow an

application to function correctly.

1.2 Packing List

lBarricade Broadband Router

lInstallation CD

lPower adapter

lOne CAT-5 UTP Ethernet cables

-6-

Chapter 2 Hardware Installation

2.1 PanelLayout

2.1.1. Front Panel

Figure 2-1 Front Panel

1 -4 LAN port socket (RJ-

45). These are where you will connect to devices on your

local area network. (adapter, hub, or switch, e.g.)

2.1.2. Rear Panel

Figure 2-2 Rear Panel

PRINT Parallel port connector (25-pins D-

type female). This is where you

connect the shared printer.

WAN WAN port socket (RJ-

45). This is where you connect to your Cable or

DSL modem or an Ethernet router.

COM Serial port connector (9-pins D-

type male). This is where you connect

your 56K modem. (This port is also a console port.)

-7-

2.1.3. TopPanel

Figure 2-3 Top Panel

LAN Port 1-4LAN port indicators, Green

. The LED flashes when the LAN port is

sending or receiving data.

WAN WAN port indicator, Green. The LED

flashes when the WAN port is

sending or receiving data.

M1 System status indicators, Orange

. M1 flashes once per second to

indicate the system is functioning properly.

2.1.4. Left Side Panel

Figure 2-4 Left Side Panel

1. Power Power inlet. This is whe

re you connect the included power adapter.

Note: The included power adapter is DC 5V/1A. Using the wrong type

of power adapter may cause damage.

2. Switch Power switch.

2.2 Installation Requirements

The Barricade can be positioned at any convenient place in your office or home. No special

wiring or cooling requirements are needed. You should, however comply with the following

guidelines:

lPlace product on a flat horizontal plane.

-8-

lKeep product away from any heating devices.

lDo not place product in a dustyor wet environment.

The recommended operational specifications of this product are:

Temperature 0 oC ~ 55 oC

Humidity 5 % ~ 90 %

You should also remember to turn off the power, remove the power cord from the outlet, and

keep your hands dry when you install the hardware.

2.3 Procedure for Hardware Installation

1. Set up LAN connection: Connect an Ethernet cable from your computer’s Ethernet

adapter to one of the LAN ports.

Figure 2-5 Setup of LAN connections for this product.

2. Set up WAN connection: Prepare an Ethernet cable for connecting this product to

your Cable/DSL modem or Ethernet backbone. Figure 2-6 illustrates the WAN

connection.

3. Connecting the Barricade with your printer:Use the printer cable to connect to the

printer port of this product.

-9-

Figure 2-6 Setup of WAN and Printer connections for this product.

4. Power on:

Connect the power cord to power inlet and turn the power switch on. The Barricade

will automatically enter the self-test phase. When it is in this phase, the indicator M1

will light up for about 5 seconds, and then M1 will flash 3 times to indicate that the

self-test operation is complete. Finally, the M1 will continuously flash once per second

to indicate that this product is operating normally.

Other manuals for Barricade

Table of contents

Other SMC Networks Network Router manuals

SMC Networks

SMC Networks SMC Barricade SMCBR24Q User manual

SMC Networks

SMC Networks Barricade SMC7004ABR User manual

SMC Networks

SMC Networks Barricade SMC7204BRA User manual

SMC Networks

SMC Networks Barricade SMC7404BRA EU User manual

SMC Networks

SMC Networks GS501 User manual

SMC Networks

SMC Networks 6726AL2 FICHE Programming manual

SMC Networks

SMC Networks 7904WBRA-N FICHE Installation guide

SMC Networks

SMC Networks 7401BRA V.2 User manual

SMC Networks

SMC Networks 7004FW - annexe 2 User manual

SMC Networks

SMC Networks GS5 - annexe 1 User manual

SMC Networks

SMC Networks EZ Switch SMCGS1610 User manual

SMC Networks

SMC Networks WUSB32 User manual

SMC Networks

SMC Networks 7901BRA2 User manual

SMC Networks

SMC Networks 7724M/VSW - annexe 1 User manual

SMC Networks

SMC Networks Barricade SMC7901BRA4 Operating and safety instructions

SMC Networks

SMC Networks EZ-Stream SMC2304WBRA-AG User manual

SMC Networks

SMC Networks TIGERSWITCH 10/100 Programming manual

SMC Networks

SMC Networks TigerSwitch SMC6709FL2 Programming manual

SMC Networks

SMC Networks Barricade SMC7004ABR User manual

SMC Networks

SMC Networks EZ1026DT User manual

SMC Networks

SMC Networks SMC6405TX User manual

SMC Networks

SMC Networks ADSL2 Barricade N Pro SMC7904WBRA-N User manual

SMC Networks

SMC Networks Barricade SMCWGBR14-N User manual

SMC Networks

SMC Networks SMC7904WBRA4 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview