SMAY SR-300 Instruction sheet

Configuration manual

SR-300

Smoke Extraction

Control Panel

https: //

www.smay.eu

 
 
Wersja 1.30 
Data edycji: 22.02.2023 r. 
Strona 1 z 20 
Configuration manual 
SR-300 
Basic Information .............................................................................................................................2 
1. Configurator ....................................................................................................................................2 
2. Connecting to the panel ....................................................................................................................2 
3. Program..........................................................................................................................................3 
Configuration ....................................................................................................................................3 
1. Tools ..............................................................................................................................................3 
2. Operations window...........................................................................................................................4 
Panel Logs ........................................................................................................................................6 
1. Tools ..............................................................................................................................................6 
2. Operations window...........................................................................................................................6 
Tools .................................................................................................................................................7 
1. New configuration ............................................................................................................................7 
1.1 Input configuration ...........................................................................................................................8 
1.2 Output configuration .........................................................................................................................9 
1.3 Zone preview ................................................................................................................................. 12 
2 Settings ........................................................................................................................................ 13 
3 Schedule....................................................................................................................................... 14 
4 Date and time................................................................................................................................ 15 
5 Additional cards ............................................................................................................................. 16 
6 Save XML configuration................................................................................................................... 16 
7 Read the XML configuration ............................................................................................................. 17 
8 Connect to the panel ...................................................................................................................... 17 
9 Save the configuration.................................................................................................................... 18 
10 Load configuration.......................................................................................................................... 18 
11 Delete configuration ....................................................................................................................... 18 
12 Read logs...................................................................................................................................... 19 
13 About the program ......................................................................................................................... 19 
New Control Panel Configuration .................................................................................................... 20 
 
 
 
 
 
 
 
Version 1.3 as of 07/2021 
SMAY reserves the right to modify this document. 

Wersja 1.30

Data edycji: 22.02.2023 r.

Strona 2 z 20

Configuration manual

SR-300

1. Basic Information

1.1. Configurator

The SR-300 RYS configurator can be downloaded from the SMAY website.

To change the language from Polish to English go to JĘZYK PROGRAMU

settings as shown below:

Choose English then close and open the program again.

1.2. Connecting to the panel

NOTE:

Before attempting to connect to the panel, the panel must be connected to the computer physically with a

USB cable.

To connect to the control unit, press the CONNECT TO THE PANEL button on the Toolbar in Configuration

mode.

Figure 1.1 CONNECT TO THE PANEL button.

A dialogue box will appear in which the appropriate port must be selected.

Figure 1.2 COM port settings dialogue box.

Once connected to the panel, the term on the button changes to DISCONNECT. To disconnect from the panel,

press the DISCONNECT WITH THE PANEL button on the toolbar in Configuration mode. Pressing the button will

disconnect you from the panel.

Figure 1.3 DISCONNECT button.

The configuration can be made without being connected to the control panel. A connection to the panel is only

necessary to upload the configuration to the panel.

Wersja 1.30

Data edycji: 22.02.2023 r.

Strona 3 z 20

Configuration manual

SR-300

1.3. Program

After starting the program, a window opens:

Figure 1.4 General view.

The window is divided into a taskbar (1); a toolbar (2) and an operations window (3).

In the taskbar (1), you can select the configuration mode for configuring the panel's inputs and outputs or the

Panel Logs mode for reading logs from the connected panel.

The toolbar is used to select the tools appropriate to the current mode.

The operations window is the main area where most of the device's configuration activities are performed.

2. Configuration

The configuration mode is used to configure inputs, outputs and other parameters of the SR-300 RYS smoke

extraction control panel.

The toolbar in Configuration mode is divided into four zones:

•Configuration –tools for creating, writing and reading central unit configurations

•Panel –tools for panel-PC communication

•Settings –tools for creating basic unit settings

•Information –presents basic information about the program

2.1. Tools

Figure 2.1 Configuration toolbar.

Wersja 1.30

Data edycji: 22.02.2023 r.

Strona 4 z 20

Configuration manual

SR-300

1. New configuration

This is used to create a new configuration of settings for a control panel. It is a basic tool to select the configuration of

the appropriate type of central panel and the additional cards used.

2. Additional cards

Allows additional cards to be added to an existing configuration.

3. Save XML configuration

Allows the current configuration to be saved as a file with an XML extension.

4. Read XML configuration

Allows the current configuration to be read from a file with an XML extension.

5. Connect to the panel

Establishes a control panel-PC connection.

6. Save configuration

Used to install the configuration in the control panel.

7. Load configuration

Allows for the reading of the configuration currently installed in the control panel.

8. Settings

Allows the opening and closing times for specific actuators to be adjusted, as well as the ventilation and opening times

for the ventilation of specific living areas.

9. Schedule

Allows the creation of weekly ventilation schedules for the respective living areas.

10.Date and time

Allows for the setting of the appropriate date and time.

Used to change the language of the configurator.

12.About

Displays basic program information and operating instructions.

2.2. Operations window

In configuration mode, the Inputs, Outputs and Zones tabs can be selected at the top of the Operations

window. The Inputs tab allows you to assign functions and fire zones to the corresponding inputs of the control unit

and auxiliary boards. Some inputs cannot be assigned functions because they are reserved for specific functions –

such inputs are greyed out.

Wersja 1.30

Data edycji: 22.02.2023 r.

Strona 5 z 20

Configuration manual

SR-300

Figure 2.2 Inputs tab.

The Outputs tab also allows functions and fire zones to be assigned to the relevant outputs of the control

panel and additional cards; here, too, some outputs are reserved and functions cannot be assigned

to them.

Figure 2.3 Outputs tab.

The Zones tab allows to view assigned functions and ventilation and fire zones.

Wersja 1.30

Data edycji: 22.02.2023 r.

Strona 6 z 20

Configuration manual

SR-300

Figure 2.4 Zones tab.

3. Panel Logs

Panel logs mode is used to read and clear logs from the device.

3.1. Tools

Figure 3.1 Configuration toolbar in the panel logs mode.

1. Read logs

Allows for the reading of the device logs.

3.2. Operations window

Figure 3.2 Operations window in the panel logs mode.

The operations window allows for the searching of the logs for a specific word in the type, description or date and

time of the log, or viewing logs of a specific type only.

Wersja 1.30

Data edycji: 22.02.2023 r.

Strona 7 z 20

Configuration manual

SR-300

4. Tools

4.1. New configuration

To start a new configuration of the RYS control panel, click on the NEW CONFIGURATION button on the

toolbar in configuration mode.

Figure 4.1 NEW CONFIGURATION button.

The following dialogue box will appear on the screen:

Figure 4.2 NEW CONFIGURATION dialogue box.

Wersja 1.30

Data edycji: 22.02.2023 r.

Strona 8 z 20

Configuration manual

SR-300

First, select from the drop-down list the type of control unit to be configured (for example, 1.4 Pinout). Then,

select the additional cards with which the RYS smoke ventilation control panel will be equipped. If the configuration

does not support specific additional cards, the unsupported cards will be greyed out and cannot be selected. Complete

the process by pressing the SAVE CONFIGURATION button.

Once the configuration has been saved, the available RYS panel inputs and outputs you selected in the

previous step will appear in the main program window.

Figure 4.3 Available inputs –general view.

3.1.1 Input configuration

To start configuring the device's inputs, select the INPUTS tab in the taskbar at the top of the operations

window.

Figure 4.4 INPUTS tab.

The main window of the program contains all the available inputs of the device to be configured, divided into

three columns: the PIN column, where the pin numbers on the control board of the given input are entered; the INPUT

column, where the types of available inputs of the control panel are listed and the FUNCTION column, where you can

set the function and the ventilation or fire zone to the given input.

Wersja 1.30

Data edycji: 22.02.2023 r.

Strona 9 z 20

Configuration manual

SR-300

Figure 4.5 Input settings.

Figure 4.6 Available functions of a monitored digital input.

Table 4.1 Available input functions.

FAS

Enables the unit's fire mode to be activated by FAS

RESET

Allows a fire mode reset, for example, from the MCP button

LIMIT SWITCH

Enables the receival of information on whether the smoke

vent is open/closed

PANEL WORK CONFIRMATION

Retrieves information on whether the devices in a particular fire zone are active

during a fire

STOP VENTILATION

Allows ventilation mode to be deactivated, for example, from a MCP button or

ventilation button

START VENTILATION

Allows ventilation mode to be activated, for example, from a MCP button or

ventilation button

WEATHER STATION

Signal from a weather station (function permanently assigned to input 1)

POWER SUPPLY GENERAL FAULT

Power supply general fault signal (function permanently assigned to input 2)

POWER SUPPLY MAINS LOSS

230 V mains fault indication (function permanently assigned to input 3)

To set up a particular central panel input, double-click on the input you wish to configure. At this point,

a dialogue box will appear where you first select the function of the input signal and then assign the zone to be set up

for the relevant fire or ventilation zone, depending on the function of the zone in question. To cancel the selection,

press the X button to the right of the function window; the input will then remain unassigned. The process can be

completed by pressing the SAVE INPUT button.

Inputs reserved for specific functions are not configurable and are greyed out.

3.1.2 Output configuration

To start configuring the device's outputs, select the OUTPUTS tab in the Taskbar at the top of the Operations

window. A list of all the available outputs of the RYS central panel to be configured will appear

in the program Operations window.

Other manuals for SR-300

Table of contents

Other SMAY Control Panel manuals

SMAY

SMAY SR-300 User manual

Popular Control Panel manuals by other brands

RDZ

RDZ PC-HRX user manual

STG-BEIKIRCH

STG-BEIKIRCH MZ3 operation instruction

Efka

Efka Variocontrol V810 instruction manual

Cebora

Cebora 208-10 instruction manual

AMX

AMX AutoPatch CP-15 instruction manual

Satel

Satel CA-6 KLED-S user manual

Evolution

Evolution IQ plus 800 installation manual

Fagor

Fagor 8040 TCO CNC operating manual

Trane

Trane ComfortLink II XL950 Control user guide

AKO

AKO PROCool AKO-17635-2 quick guide

ABB

ABB 6136/30M-101 operating instructions

Telikou

Telikou BK-603 Belt Pack instruction manual

Mapei

Mapei Mapeheat Thermo Touch user guide

Bosch

Bosch D9412GV4 owner's manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 user manual

Sminn

Sminn BOX L VF1L EI instruction manual

Balboa

Balboa TP600 user manual

Nice

Nice HSCU1 Instructions and warnings for installation and use