SmartPro Optimum-1 User manual
1.INTRODUCTION
CONTENTS
04
05-06
07-15
16-18
19
20-22
22-24
25-27
28-35
36-38
39-43
44
44-45
46
3.QUICK START GUIDE
4.FEATURES AND ADVANTAGES
2.DISCLAMERS, EXCLUSIONS AND LIMITATIONS OF LIABILITY
5.PRODUCT SPECIFICATIONS
6.DEVICE ACCESSORIES AND OVERVIEW
7.POWERING THE DEVICE
8.CALIBRATION
9.TESTING PROCEDURES
10.TEST RESULTS
11.OTHER FEATURES
12.SAFETY INFORMATION
13.SAFE HANDLING / MAINTENANCE
14.TROUBLESHOOTING
1.INTRODUCTION
1.INTRODUCTION
Congratulations for having our SmartPro Optimum-I (SPO-I).
The very first and unique handheld diamond multi-tester using a special UV LEDs with fiber optic
technology that designed for identifying between Natural Diamond, CVD/HPHT, all types of
Moissanite, various shapes and carat weight from 0.015 carat to 10 carat for polished diamonds
Colorless to Faint (D-M) Loose diamonds or Jewelry (with or without under hole)
04
2.DISCLAMERS, EXCLUSIONS AND LIMITATIONS OF LIABILITY
2.DISCLAMERS, EXCLUSIONS AND LIMITATIONS OF LIABILITY
Please read and note SMARTPRO WARRANTY TERMS AND CONDITIONS as stated in the warranty
card. SmartPro warranty for its subject to proper use by its user in accordance with all the terms and
conditions as stated in the relevant user manual and shall cover only manufacturing defects.
Due to continued product improvement, SmartPro reserves the right to revise all documents
including the right to make changes to the user manual without notice and without obligation to
notify any person of such revisions or changes. Users are advised to check SmartPro’s website
http://www.smartproinstrument.com
05
2.DISCLAMERS, EXCLUSIONS AND LIMITATIONS OF LIABILITY
SmartPro shall not be responsible for any damage or loss resulting from the use of the product or user
manual, and under no circumstances shall SmartPro, its manufacturer or any of its subsidiaries,licensors,
distributors, resellers, servants and/or agents be liable for any direct or indirect damages resulting from
the use of this product.
To maximum extent permitted by applicable law, under no circumstances shall SmartPro, its manufacturer
or any of its subsidiaries, licensors, distributors, resellers, servants and/or agents be liable for any
special, incidental, consequential or indirect damages howsoever caused.
Smartpro Optimum I referred to in this user manual is provided and/or sold on “as is” basis. Except as
required by applicable law, no warranties of any kind, expressed or implied, including, but not limited to,
the implied warranties of merchantability and fitness for a particular purpose.
06
3. QUICK START GUIDE
3.1) Turn ON/Turn OFF
1. Plug the USB cable from to Output port of Power bank /Adaptor to an Input port of SPO-I
2. Press and hold the Switch for 3 seconds to turn ON/OFF
12
3. QUICK START GUIDE
Bluetooth UV Torch
Press Start!
07
1. Cover the Probe tip
2. Click at “START” to begin the calibration
T
A
R
T
S
CLOSE the tester's PROBE
with its PROTECTOR
the press START for calibration
3.2) Calibration
3. QUICK START GUIDE
12
08
2
13
54
Press Start!
3.3) Functions
T
A
R
T
S
3. QUICK START GUIDE
Bluetooth UV Torch
09
No.
1
2
3
4
5
Item display Meaning
Testing START/ STOP
UV Torch ON / OFF
Information&Test results
Press Start!
Ready!
Rotate Display
Bluetooth ON/OFF
DIAMOND MOISSANITE
CVD/HPHT
T
A
R
T
S
T
O
P
S
3. QUICK START GUIDE
10
3.4) Test Setup
Ready!
NOTE: Don’t move probe away from Gem.
T
O
P
S
Bluetooth UV Torch
3. QUICK START GUIDE
11
This manual suits for next models
1
Table of contents
Other SmartPro Test Equipment manuals
