Smartinterface Lunette User manual
1
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
Instructions – Lunette Wrench Set
The Lunette wrench Set consists of the lunette wrench, a workbench, a pin and an O-ring, as well as a
battery.
This wrench allows you to replace the battery of a Suunto Stinger or a Spyder in a simple do-it-yourself
process. The included workbench greatly facilitates the process of replacing the battery. Place your
diving computer between the 4 metal pins as depicted in the bottom illustration (photograph).
This will ensure that the computer remains securely fastened in place, thus allowing you to unscrew the
crown with the special wrench. Replace the old battery and the O-ring with the new ones, and use the
wrench again to screw the crown back on.
Important! Make sure to work very carefully (and in a calm environment)
on a clean work surface. Use pin as assembly tool.
Instructions
Lunette Wrench Set
2
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
1.0 Place clock on workbench (90° to workbench)
2.0 Place wrench onto lunette. (cogs must grip, level)
Lunette Wrench Set
3
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
2 .1 Turn wrench to the left (lunette fits very tight)
2.2 Unscrew lunette by hand.
Lunette Wrench Set
4
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
2.3 Place lunette aside
3.0 Use pin to lift the glass on the side containing the small notch.
Lunette Wrench Set
5
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
3 .1 Place glass aside
4.0 Lift synthetic ring with the pin.
Lunette Wrench Set
6
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
4 .1 Place synthetic ring aside.
5.0 Lift O-ring with the pin.
Lunette Wrench Set
7
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
5 .1 Remove and discard the O-ring (NOT intended for re-use).
6.0 Carefully extract clock element (ease element out by holding on at the top and the bottom!)
Lunette Wrench Set
8
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
6 .1 Remove clock element (watch out for the wire) und place it upside down into the casing.
7. 0 Lift battery clamp (star) by the protruding point.
Lunette Wrench Set
9
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
7.1 Place battery clamp (star) aside.
8.0 Remove battery (carefully extracting it with the pin) and properly dispose of the battery.
Lunette Wrench Set
10
Rev. 2 . 0 .1 www.smartinterface.de · info@smartinterface.de
8 .1 Do not throw battery into trash; use public collection facilities for hazardous materials.
8.2 Insert new battery.
Lunette Wrench Set
Other Smartinterface Power Tools manuals
