Smartgen HT40MA User manual
HT40MA
ENGINE WATER HEATER
USER MANUAL
Chinese trademark
English trademark
SmartGen —make your generator
smart
SmartGen Technology Co., Ltd.
No.28 Jinsuo Road, Zhengzhou, Henan Province, China
Tel: +86-371-67988888/67981888/67992951
+86-371-67981000(overseas)
Fax: +86-371-67992952
Email: sales@smartgen.cn
Web: www.smartgen.com.cn
www.smartgen.cn
All rights reserved. No part of this publication may be reproduced in any material form (including
photocopying or storing in any medium by electronic means or other) without the written permission of
the copyright holder.
Applications for the copyright holder’s written permission to reproduce any part of this publication
should be addressed to Smartgen Technology at the address above.
Any reference to trademarked product names used within this publication is owned by their respective
companies.
SmartGen Technology reserves the right to change the contents of this document without prior notice.
Table 1 –Software Version
Date
Version
Note
2021-12-22
1.0
Original release.
2022-04-24
1.1
Change the holders and packing list; add maintenance
instruction.
2022-07-20
1.2
Modify the drain screw.
HT40MA Engine Water Heater User Manual Page 3 of 12
CONTENTS
1 OVERVIEW...................................................................................................................................... …….4
2 PERFORMANCE AND CHARACTERISTICS......................................................................................... 4
3 TECHNICAL PARAMETERS................................................................................................................. 5
4 PANEL INDICATION............................................................................................................................. 6
5 CONNECTIONS .................................................................................................................................... 6
6 INSTALLATION INSTRUCTION ........................................................................................................... 7
7 OPERATION........................................................................................................................................ 10
7.1 COMMISSIONING.................................................................................................................... 10
7.2 OVERHEAT PROTECTION RESET........................................................................................... 10
8 CAUTIONS AND FAULT SOLUTIONS................................................................................................ 11
9 CASE AND INSTALLATION DIMENSIONS........................................................................................ 12
10 PACKING LIST.................................................................................................................................... 12
HT40MA Engine Water Heater User Manual Page 4 of 12
1OVERVIEW
HT40MA Water Heater enables wide application on various engine coolant pre-heating. It has fine
cast aluminum enclosure and self-extinguishing engineering plastics end closure, easy and convenient
to use.
If the ambient temperature is lower than 4ºC during cranking, engine coolant and lubricant may
condense into solid state and lose their lubricating and cooling properties, which can damage the
engine. Therefore, engine heater should be installed to ensure normal starting and running of the engine
when the ambient temperature is lower than 4ºC.
The inner heating pipe and end cover both adopt stainless steel with high corrosion resistance. The
heater has light indication function, which can indicate power and heating status. 3 kinds of heaters
with different heating temperature are optional (Standard heater: 40ºC; 50ºC and 60ºC heaters are
needed to be customized).
This product is suitable for various engines with (13~25) L displacement.
Please login our company's official website to select heaters.
2PERFORMANCE AND CHARACTERISTICS
——Fine cast aluminum enclosure, stainless steel inner pipes and sealed end closure;
——Coolant temperature is controlled by thermostat which is installed within the heater. It has
simple structure and high reliability;
——Power, heating and overheat protection light indicators make it easy to observe the heater
status;
——Both of the two water inlets have one-way inlet valve and they sit on either side of the heater;
Users can choose any one to use during installation;
——Both of the two power line inlets are knock-off design; Users can choose suitable one to use
according to the installation way. Waterproof joints (stuffing box) are provided;
——There is a water drain valve with seal ring on the bottom of the heater so as to be used when
needed;
——Overheating thermostat provides the protection of dry heating and overheating;
——Press Test key to test-run the unit when ambient temperature is over high;
——This product can work normally at -40ºC temperature.
HT40MA Engine Water Heater User Manual Page 5 of 12
3TECHNICAL PARAMETERS
Table 2 –HT40MA Specification
Item
Content
Model
HT40MA
Rated Power
4000W
Rated Voltage
AC240V
Operating Voltage
AC190V~AC277V
Rated Current
16.7A
Engine Displacement
(13~25)L
Thermostat Switch Range
HT40MA: Off: (40±3)ºC Reset: (25±5)ºC
HT40MA-1: Off: (50±3)ºC Reset: (35±5)ºC
HT40MA-2: Off: (60±3)ºC Reset: (45±5)ºC
Overheating Switch Range
Off: (95±4)ºC Manual Reset: (temperature below 80ºC)
Insulating Resistance
≥50MΩ
Electrical Strength
AC 1.5kV 1min, ≤2.5mA
Inlet/Outlet Size
3/4″(φ19mm)
Max. Water Pressure
0.5MPa
Protection Level
IP54
Vibration Resistance
(5~8)Hz; Amplitude±7.5mm; Triaxial
(8~500)Hz; a=2g; Triaxial
Shock Resistance
Half-sine wave; apeak=50g; Triaxial
Working Temperature
-40ºC~+70ºC
Storage Temperature
-40ºC~+70ºC
Case Dimensions
445mm×375mm×210mm
Weight (include accessories)
5.6kg
HT40MA Engine Water Heater User Manual Page 6 of 12
4PANEL INDICATION
Fig.1 –Panel Indication
5CONNECTIONS
Fig.2 –Wire Connection
Install the water-proof connection joint after knock on the knock-off hole which on the rear plastic
shell. Pass the 4mm2 power line through the thread hole of rear shell to connect to L, N, E terminals
respectively.
HT40MA Engine Water Heater User Manual Page 7 of 12
Fig.3 –Connection Position
6INSTALLATION INSTRUCTION
Please install the heater vertically according to the diagram before use. Paying attention to
direction of heater inlet and outlet, and ensure that the heater position is below the lowest water level of
the engine and that all the air is exhausted out of the heater and it is topped off with coolant.
Fig.4 –Operation Diagram
HT40MA Engine Water Heater User Manual Page 8 of 12
Fig.5 –Installation Position Diagram
Fig.6 –Incorrect Pipe Connection Methods
NOTE: If there is a W-shaped bend or reverse U-shaped bend during pipe connection, the air
accumulated in the pipe cannot be discharged normally, resulting in the liquid cannot be circulated
properly. The air dissolved in the liquid will be precipitated during heating and retained in the bend, so
on the condition of unsmoothed pipeline, even if by the manual exhaust, it will repeat in the next
heating process of air collection. To ensure that the smooth liquid circulation, the hosepipe with an
inner diameter of more than 20mm and pipe joints with an inner diameter of more than 15mm should
be selected.
HT40MA Engine Water Heater User Manual Page 9 of 12
Fig.7 –Installation Method Diagram
As shown in Fig.7, the holder(Right) must be installed at the water outlet end of the heater, and the
installation plane should be kept as level as possible.
HT40MA Engine Water Heater User Manual Page 10 of 12
Fig.8 –Assembly Structure
7OPERATION
7.1 COMMISSIONING
If heater doesn’t work and overheat indicator doesn’t light on, users can force heater to work by
pressing test key.
7.2 OVERHEAT PROTECTION RESET
When overheat alarm indicator lights on, heater will enter into overheat protection status and
stop heating. If heater temperature falls below the reset temperature limit of overheat protection
thermostat (80ºC), heater enters into auto mode again.
Table of contents
Other Smartgen Water Heater manuals
Popular Water Heater manuals by other brands
Kenmore
Kenmore 153.582400 Use & care guide
Applimo
Applimo Edel AIR Installation and operating instructions
STIEBEL ELTRON
STIEBEL ELTRON Eltronom SHU 5 S Operating and installation instructions
clage
clage E-Mini Series Operating and installation instructions
Toyotomi
Toyotomi Oil Miser OM-180 installation manual
Bradford White
Bradford White EF Series Service manual
Eccotemp
Eccotemp 40-H Use & care manual
Dimplex
Dimplex ECSd125-580 Installation and user instructions
Dux
Dux 32FCR6N installation manual
Toyotomi
Toyotomi Oil Miser OM-148 (Type D) Operation and maintenance instructions
Noritz
Noritz N-132M Owner's guide and installation manual
TESY
TESY GCV7/4S 10047 Instructions for use and maintenance
