SmarTap E-Valve User manual

INSTALLATION GUIDE

Welcome,

Thank you for using SmarTap –an advanced digital shower system.

Careful adherence to the installation procedures and maintenance

practices set out in this manual will ensure many years of outstanding

performance from your new shower.

Please note,

No part of this publication may be reproduced, stored in a retrieval

system or transmitted in any form by any means, electronic,

mechanical, photo reproductive, recording or otherwise without the

prior written permission of SmarTap Ltd.

This guide is subject to periodic review, update, and revision.

Customers are cautioned to make sure that the guide’s information

applies to the system they are using.

This product performs as described in this guide when assembled,

operated, maintained, and repaired in accordance with the instructions

provided. Do not repair this product or any of its parts other than in

accordance with written instructions provided by SmarTap Ltd.

1 of 51

Table Of Contents

Table Of Contents................................................................................ 1

Introduction.......................................................................................... 2

Important Safeguards .......................................................................... 3

Labels and Symbols ............................................................................ 6

Technical Specifications....................................................................... 7

Package Contents ............................................................................... 8

System Dimensions & Mechanical Specifications ...............................10

Tools...................................................................................................13

Hydraulic Characteristics ....................................................................14

Installation Options.............................................................................15

Plan System Layout............................................................................19

Prepare for Installaiton........................................................................19

Prepare Infrastructure.........................................................................22

Connect e-Valve and Connect Pipes ..................................................30

Connect Controllers............................................................................35

Install Power Supply ...........................................................................37

Connect Cables to e-Valve .................................................................38

Software Outlets Configuration ...........................................................41

Final Inspection ..................................................................................42

Maintenace.........................................................................................43

Troubleshooting..................................................................................46

Notices ...............................................................................................48

2 of 51

Introduction

This guide provides the information necessary to install and operate

the SmarTap digital shower system in a safe and efficient manner.

Please read and understand this guide before operating the

system. It is mandatory to follow the instructions in the guide and the

technical description in order to avoid damage to the system.

If any part of this guide is not clear, please contact SmarTap Technical

Support at support@smartap-tech.com for clarification.

Warnings / Cautions / Notes

The manual includes several kinds of comments, marked with specific

statements and aimed to attract user attention to a specific type of

information.

The definitions of Warnings, Cautions and Notes used in this document

are as follows:

WARNING

A WARNING HIGHLIGHTS AN ESSENTIAL OPERATING OR

MAINTENANCE PROCEDURE, PRACTICE, CONDITION,

STATEMENT, ETC., WHICH, IF NOT STRICTLY

OBSERVED, COULD RESULT IN INJURY OR DEATH OF

PERSONNEL, OR LONG TERM HEALTH HAZARDS.

CAUTION

A CAUTION HIGHLIGHTS AN ESSENTIAL OPERATING OR

MAINTENANCE PROCEDURE, PRACTICE, CONDITION,

STATEMENT ETC., WHICH, IF NOT STRICTLY OBSERVED,

COULD RESULT IN DAMAGE TO, OR DESTRUCTION OF,

EQUIPMENT OR LOSS OF EFFECTIVENESS.

NOTE

A NOTE HIGHLIGHTS OR CLARIFIES AN ESSENTIAL

SYSTEM DESCRIPTION, OPERATING OR MAINTENANCE

PROCEDURE, CONDITION OR STATEMENT.

3 of 51

Important Safeguards

Please read these instructions carefully before installation.

Read Instructions

All the safety and operating instructions should be read before system

is unpacked and installed.

Retain Instructions

The safety and operating instructions should be retained for future

reference.

Follow Instructions

All installation and configuration instructions should be followed.

WARNING

THE WARRANTY WILL BE VOID IF THE PRODUCT IS

NOT INSTALLED ACCORDING TO THESE

INSTRUCTIONS. SMARTAP WILL NOT BE LIABLE FOR

LOSS OR DAMAGES RESULTING FROM IMPROPER

INSTALLATION OR USE OF THE PRODUCT THAT IS

NOT IN ACCORDANCE WITH THE INSTRUCTIONS

SPECIFIED BELOW.

NOTE

THE CONTENTS OF THIS GUIDE ARE SUBJECT TO

CHANGE WITHOUT PRIOR NOTICE.

Safety Instructions

WARNING

DO NOT USE THE E-VALVE SYSTEM BEFORE

READING AND UNDERSTANDING THIS GUIDE

4 of 51

WARNING

UNAUTHORIZED MODIFICATION MAY CAUSE POOR

PERFORMANCE OF THE E-VALVE. DO NOT MAKE

MODIFICATIONS TO THE VALVE AS THIS COULD

ADVERSELY AFFECT THE PERFORMANCE OF THE

VALVE AND VOID THE WARRANTY. SMARTAP WILL

NOT BE LIABLE UNDER ITS WARRANTY OR

OTHERWISE FOR PERSONAL INJURY OR DAMAGE

CAUSED BY AN UNAUTHORIZED MODIFICATION.

WARNING

PRODUCT MUST BE INSTALLED BY QUALIFIED AND

CERTIFIED PERSONNEL, IN ACCORDANCE WITH ALL

CURRENT RELEVANT STATUTES AND REGULATIONS

IN YOUR COUNTRY.

WARNING

ALL SHOWERS REQUIRING AN ELECTRICAL

CONNECTION MUST BE INSTALLED BY QUALIFIED

PERSONEL FOLLOWING THE RELEVANT

REGULATIONS IN YOUR COUNTRY AND CERTIFIED TO

CURRENT BUILDING REGULATIONS.

WARNING

BEFORE ANY ELECTRICAL CONNECTIONS ARE MADE,

THE ELECTRICITY SUPPLY MUST BE TURNED OFF AT

THE MAINS SWITCH. ALL ELECTRICAL INSTALLATION

MUST BE CARRIED OUT ONLY BY QUALIFIED

PERSONNEL.

CAUTION

BE CAREFUL WHILE UNPACKING; THE SYSTEM IS

FRAGILE.

5 of 51

Installation Guidelines

CAUTION

THE E-VALVE SHOULD BE INSTALLED IN AN

ACCESSIBLE LOCATION FOR MAINTENANCE (AND NO

WARRANTY CLAIM CAN BE CONSIDERED OR

LIABILITY ACCEPTED BY SMARTAP IF LACK OF

ACCESSIBILITY HAS PREVENTED MAINTENANCE).

CAUTION

THE E-VALVE MUST NOT BE INSTALLED IN PLACES

WHERE EITHER THE AMBIENT TEMPERATURE IS

LIKELY TO EXCEED 40°C OR WHERE FREEZING MAY

OCCUR.

THE DIAL CONTROLS MUST NOT BE INSTALLED IN

PLACES WHERE THE AMBIENT TEMPERATURE IS

LIKELY TO FALL BELOW 5°C OR RISE ABOVE 60°C.

CAUTION

TO PREVENT DAMAGE IN THE EXISTING

INFRASTRUCTURE IT IS MOST RECOMMENDED TO

CHECK FOR HIDDEN PIPES OR CABLES BEFORE

DRILLING ANY HOLES.

PIPES ON BOTH INLET AND OUTLETS SHOULD BE AS

SHORT AS POSSIBLE IN ORDER TO AVOID

REDUCTION OF FLOW RATE AT THE CONNECTED

OUTLETS.

6 of 51

Labels and Symbols

The e-Valve system has the following labels and symbols.

Symbol

Description

Read the Installation manual

Manufacturer

Class III Appliance

Read all documents including the User’s Guide

IPx6

IPx6 Water projected by a nozzle (6.3 mm)

against enclosure from any direction shall have

no harmful effects.

Not for general waste

CE conformity marking

7 of 51

Technical Specifications

Absolute Maximum Ratings

Working pressure

1 –9 bar

Overpressure

16 bar

Burst pressure

35 bar

Hot water temperature

70 Co

Ambient temperature

5 –60 Co

Relative humidity

90% non-condensing

Recommended Conditions

Working pressure

2 –5 bar

Hot water temperature

50 –65 oC

Cold water temperature

10 –25 oC

Set point temperature

Cold water or 35 –45oC

Performance at Recommended Conditions

Temperature accuracy

±0.5°C

Flow accuracy

±5% of Full Scale

Hydraulic performance

Complies with EN1111 standard

Miscellaneous

Supplied user interface

cable length

Operational voltage

100 –240V ~ 50 –60Hz

Standards

Safety: EN 60335-1 :2012,

EN60335-2-105:2005

EMC: EN 55014-1, EN 55014-2

CE, RoHS, WRAS

WARNING

DO NOT USE THE SYSTEM IF THESE CONDITIONS

ARE NOT MET.

8 of 51

Package Contents

The SmarTap Digital Shower system package includes the following

components:

AC cord length: 1.5m

DC cord length: 1.5m

e-Valve

AC/DC Adaptor

Table of contents

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual

SmarTap e-Valve User manual

Popular Control Unit manuals by other brands