SkyVac 78 User manual
SkyVac Internal 78 Model Assembly/User Guide
SkyVac Assembly
Push the
flexi
hose vac
cuff into
vac port
Always use the filter to protect the
Motor
The drum cartridge must be kept in
place at all times. Dust & debris
will collect inside the bin.
alternatively fit filter bag with
drum filter to collect debris inside
the bag this will also give ultra fine
filtration
KEEP FILTER CLEAN
If using SkyVac as a wet pick up
vac. Remove both cartridge and
bag filters. Consult your hand book
for additional guidance notes
Filter Bag
Insert the brush
attachments onto the
end of your chosen
rigid carbon fibre
tool holder
Connect poles together to the desired height. Select you tool holder and fit into suction pole
then select your brush attachment and fit onto tool holder.
Fit anti-static connector into flexi hose
cuff
Select end tool to
suit application
GOOD PRACTISE
Don’t
Force the suction pole joints together.
Ensure the joints are free from dust and grit before putting together. Wipe the
joints with a damp cloth. Grit can lock the joints up!
Do’s
Occasionally spray the carbon fibre joints with Silicone Spray
Keep filters clean in your vacuum to keep retain suction power
When connecting poles together ensure they are free from grit and debris to
prevent premature wear.
See your dealer for spare dust bags and specialist end tool not included in the
standard kit
Fit anti-static connector onto base suction
pole
Table of contents
Other SkyVac Cleaning Equipment manuals
