Skinact Spa Equipment User manual

Spa Equipment
&
Toll Free: 1.800.418.0830 www.skinact.com
www.spaandequipment.com International: 818.834.6640
Hydraulic Spa Treatment Table 90° Full Sitting
Position User Manual

Toll Free: 1.800.418.0830 www.skinact.com
www.spaandequipment.com International: 818.834.6640
Spa Equipment
&
Copyright © 2021 Spa and Equipment, All Rights Reserved
NOTICE
No part of this document may be photocopied, reproduced, or
translated into any other language without prior written con-
sent of Spa and Equipment/SkinAct.
The information in this document is subject to change without
notice at any time and should not be construed as a commit-
ment by Spa and Equipment/SkinAct.
Spa and Equipment/SkinAct assumes no responsibility for
any errors that may be in this document, nor does it make ex-
pressed or implied warranty with regard to this material, includ-
ing, but not limited to, the implied warranties of merchantability
and tness for a particular purpose.
Spa and Equipment/SkinAct shall not be liable for incidental
or consequential damages arising out of the furnishing, per-
formance, or use of this document and the program material
which it describes.
P. 2

Pinch Point
!
Pinch Point
!
Pinch Point
!
Pinch Point
!
No sitting
on backrest
No sitting
on foot rest
Sit only
on seat
P. 3
Precautions
• Read this manual carefully before installation and operation.
• No one should ever sit on the back rest or foot rest sections.
• This unit should only be operated by trained professionals.
• Keep children from using or playing on the unit.
• Do not stand on any portion of the unit.
• Ensure the unit is kept dry and free of water.
• When operating the unit, ensure that your and your clients’
hands or other body parts cannot be pinched by the moving
parts (see pinch points below).
• If you have gone through the troubleshooting steps in this
manual and an issue persists, please call Spaandequipment/
SkinAct for further assistance: 1(800)418-0830
• OPERATE AT YOUR OWN RISK AND USE COMMON SENSE:
OWNER/OPERATOR IS RESPONSIBLE FOR HIS/HER OWN
SAFETY AS WELL AS ANYONE NEAR OR ON THE UNIT.

Cut from
inside
Lay the side
down
P. 4
Removing From The Box
INSTRUCTIONS
• When you receive the box, carefully cut the tape on the top
aps and open the top (see photo below).
• To see a video about removing your item from the box, visit
https://youtu.be/OGIz0NLdW1I or scan the QR code below.
• Then you can cut one short side of the box and lay it down.
This makes it easier to carry the item out of the box.
• Make sure to cut from the inside of the box. This helps to
protect from accidentally cutting your unit.
Scan to see
video
Cut from inside
the box

12
P. 5
Removing From The Box
• Please keep all packaging materials. This helps in the event
that you need to return the unit for whatever reason.
• TEAM LIFT: Make sure to have at least two people to lift and
move the unit.
• Do not lift from the head rest or foot rest areas.
• For this unit, it is best to lift with both hands on the metal
base directly underneath the seat cushion.
• Lift the unit with your partner and walk it out of the box.
• We recommend setting the unit on a furniture dolly or pallet
jack when and where it is practical to use one. Otherwise, you
can carry the unit to your desired location.
Furniture Dolly
One hand here One hand here
Pallet Jack

Rods
Remove screws
P. 6
Installation/Assembly
• To see an assembly video for this unit, please visit https://
youtu.be/2P6PTDwT_y0 or scan the QR code below.
Scan to see
video
INSTRUCTIONS
• Please hold on to all original packaging at least until you have
tested all of the functions of the unit.
• Locate the rods on the back of the backrest.
• Remove the screw at the end of each rod.
• Insert the rods into the holes on the bracket under the rods.

P. 7
Installation/Assembly
• The process is the same for connecting the foot rest.
• Remove the screw at the end of each rod.
• Insert the rods into the holes on their bracket.
• Replace the screw at the end of each backrest rod.
• Replace the screw at the end of each foot rest rod.
• Next you can attach the metal towel holder on the back of
the backrest. Simply remove the single screw, slide the holder
into the bracket, and reattach the screw.
Bracket
Screw
Towel
Holder
Replace
screws

P. 8
Installation/Assembly
• Finally you can put the complementary pillow into its place.
• Then you can put the arm rests into their places. Simply insert
the rods of the arm rests into the holes and push until they
are seated.

Leveling feet
P. 9
• All of our hydraulic chairs come with leveling feet on the bot-
tom of the base. These are super useful when the oor below
is slightly uneven.
• This chair has four leveling feet, one at each corner of the
base.
• If the base of your chair rocks back and forth, adjust the lev-
eling feet by spinning them to raise or lower them. The foot
that clears the oor when you rock the table is the one that will
need adjustment.
Leveling The Base

P.10
• NOTE: When adjusting the backrest or foot rest, always keep a
hand on the backrest or foot rest to avoid abrupt movements.
• When the backrest is upright like in the photo below, to bring
the backrest down, lift up on the bracket and bring the backrest
to the desired angle. Once the angle is reached, let go of the
bracket and it will hold the backrest in place.
• When the backrest is down, pull the backrest itself up until you
reach the desired angle. When you reach the desired angle you
can stop lifting and the bracket will hold the backrest in place.
• When the foot rest is down like in the photo below, to bring it
up, pull on the foot rest until it reaches the desired angle. Then
stop lifting and the bracket will keep it in place.
• When the foot rest is up, to lower it, lift it slightly to disengage
the bracket, then pull the bracket towards you and lower the
foot rest until it reaches the desired angle. Then let go of the
bracket and let it lock the foot rest in place.
Adjusting The Backrest and Foot Rest
Lift bracket
when lowering
back rest
Lift bracket
when lowering
foot rest
Table of contents
Other Skinact Spa Accessories manuals




















