Skil 2710 User manual
CORDLESS SCREWDRIVER
2710 (SD1*2710**)
www.skil.com
ORIGINAL INSTRUCTIONS
SKIL BV - Rithmeesterpark 22 A1 - 4838GZ - Breda - NL 10/22 2610S01592
UK: Chervon Europe Ltd.- 34 Bridge Street- Reading - RG1 2LU
8
2
EU Declaration of conformity
Cordless screwdriver
Article number
We declare under our sole responsibility
that the stated products comply with all
applicable provisions of the directives and
regulations listed below and are in
conformity with the following standards.
Technical le at:
2710
2710
SD1*2710**
2006/42/EC
2014/30/EU
2011/65/EU
EN 62841-1:2015
EN 62841-2-2:2014
EN 55014-1:2021
EN 55014-2:2021
EN 50581:2012
Skil BV
Rithmeesterpark 22 A1
4838 GZ Breda
The Netherlands
SKIL BV - Rithmeesterpark 22 A1 -
4838GZ - Breda - NL
31.10.2022
Olaf Dijkgraaf
Approval Manager
3
2710
SD1*2710**
2006/42/EC
2014/30/EU
2011/65/EU
EN 62841-1:2015
EN 62841-2-2:2014
EN 55014-1:2021
EN 55014-2:2021
EN 50581:2012
Skil BV
Rithmeesterpark 22 A1
4838 GZ Breda
The Netherlands
SKIL BV - Rithmeesterpark 22 A1 -
4838GZ - Breda - NL
31.10.2022
2710
Declaration of
Conformity
Cordless
screwdriver Article number
We declare under our sole responsibility that
the stated products comply with all applicable
provisions of the directives and regulations
listed below and are in conformity with the
following standards
Technical le at:
Chervon Europe Ltd., 34 Bridge Street,
Reading, RG1 2LU, United Kingdom
2710 SD1*2710** Supply of Machinery (Safety) Regulations 2008
(SI 2008/1597)
Electromagnetic Compatibility Regulations
2016 (SI 2016/1091)
The Restriction of the Use of Certain
Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
(SI 2012/3032)
EN 62841-1:2015
EN 62841-2-2:2014
EN 55014-1:2021
EN 55014-2:2021
IEC EN 63000:2013
Chervon Europe Ltd., 34
Bridge Street, Reading,
RG1 2LU, United
Kingdom, as authorized
representative (in terms
of above regulations)
acting on behalf of Skil
BV, Rithmeesterpark 22
A1, 4838GZ Breda, The
Netherlands
James McCrory
Technical Service Manager
Place of issue: Reading
Date of issue: 31/10/2022
4
2710
1
4V Max
3,6
Volt
˂ÅÅ
ʽƓˀ˅ÿ
ʾƓ˂À
ÁƘÇÆ
ʾ˂ʽ
Å
ʾʽʽ
Ƙ
ʿˁʽ
˂
ʾʽʽʽÅ
ʿÀÇÍÊË
ʿ˃ʾʽʽʽ˄ʿʿ
ʽƓʽˁ˂ÿ
ʿ˃ʾʽʽʽ˄ʿˀ
ʽƓʽˁ˂ÿ
2610S00722 / 2610S00723
USB
Micro-B
USB
Micro-B
2
E
F
D
CB
A
J
H
GK
3
8
4
9
5
q
76
5
2
8
9
q
C
BB
A
K
6
w
e
r
H
7
PHILLIPS
POZIDRIV
SLOTTED
TORX
u
y
t
ACCESSORIES ➞ WWW.SKIL.COM
8
power tool or battery-operated (cordless)
power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of ammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodied plugs and
matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk of
electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
a
Cordless screwdriver 2710
INTRODUCTION
• This tool with left/right rotation is
intended for screwdriving and pre-
drilling in wood
• This tool is not intended for
professional use
• Read and save this instruction manual
3
TECHNICAL DATA 1
Max. torque for hard screwdriving
application according to ISO 5393 : 7Nm
2610S00722/2610S00723
Average eciency: 75.5%
No load power consumption: 0.07W
TOOL ELEMENTS 2
A Charger
B Charger interface
C Battery level indicator
D On/o switch
E Switch for changing
direction of rotation
F Pivot unlock knob
G Magnetic bitholder
H LED-light
J Bit storage
K Charger cable
SAFETY
GENERAL POWER TOOL SAFETY
WARNINGS
-WARNING Read all safety
warnings, instructions, illustrations
and specications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded)
9
will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the
switch does not turn it on and
o. Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the
power source and/or remove the
battery pack, if detachable, from
the power tool before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e) Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may aect the
power tool’s operation. If damaged,
have the power tool repaired
before use. Many accidents are
caused by poorly maintained power
tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc., in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
dierent from those intended could
result in a hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger
specied by the manufacturer. A
charger that is suitable for one type of
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the inuence of
drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
b) Use personal protective
equipment. Always wear eye
protection. Protective equipment
such as a dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the o-
position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your nger
on the switch or energising power
tools that have the switch on invites
accidents.
d) Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the power
tool may result in personal injury.
e) Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear
loose clothing or jewellery. Keep
your hair and clothing away from
moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
h) Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore
tool safety principles. A careless
action can cause severe injury within a
fraction of a second.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
10
SAFETY INSTRUCTIONS FOR
CORDLESS SCREWDRIVERS
• Hold the power tool by insulated
gripping surfaces, when
performing an operation where
the fastener may contact hidden
wiring (fasteners contacting a “live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock)
GENERAL
• Do not work materials containing
asbestos (asbestos is considered
carcinogenic)
• Dust from material such as paint
containing lead, some wood species,
minerals and metal may be harmful
(contact with or inhalation of the dust
may cause allergic reactions and/or
respiratory diseases to the operator or
bystanders); wear a dust mask and
work with a dust extraction device
when connectable
• Certain kinds of dust are classied
as carcinogenic (such as oak and
beech dust) especially in conjunction
with additives for wood conditioning;
wear a dust mask and work with
a dust extraction device when
connectable
• Follow the dust-related national
requirements for the materials you
want to work with
• Do not expose tool/charger to rain
• Do not disassemble charger or tool
• Ensure that switch E 2is in the
middle (locking) position before
making any adjustments or changing
accessories as well as when carrying
or storing the tool
CHARGING/BATTERIES
• Only use SKIL charger 2610S00722
(U.K. 2610S00723) with this tool
• This charger
can be used by
children aged 8
and above and
by persons who
have physical,
battery pack may create a risk of re
when used with another battery pack.
b) Use power tools only with
specically designated battery
packs. Use of any other battery packs
may create a risk of injury and re.
c) When battery pack is not in use,
keep it away from other metal
objects like paper clips, coins,
keys, nails, screws, or other small
metal objects that can make a
connection from one terminal
to another. Shorting the battery
terminals together may cause burns
or a re.
d) Under abusive conditions,
liquid may be ejected from the
battery; avoid contact. If contact
accidentally occurs, ush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or tool
that is damaged or modied.
Damaged or modied batteries may
exhibit unpredictable behaviour
resulting in re, explosion or risk of
injury.
f) Do not expose a battery pack
or tool to re or excessive
temperature. Exposure to re or
temperature above 130°C may cause
explosion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the
temperature range specied in the
instructions. Charging improperly or
at temperatures outside the specied
range may damage the battery and
increase the risk of re.
6) SERVICE
a) Have your power tool serviced by a
qualied repair person using only
identical replacement parts. This
will ensure that the safety of the power
tool is maintained.
b) Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorized service
providers.
Other manuals for 2710
1
Table of contents
Other Skil Power Screwdriver manuals
