Skeye. HW 90240 User manual

User Guide

skeye.dart

HW 90240

Version 1.04

This document and its contents shall not be reproduced or trans erred in any orm without

the event o patenting or registration o utility models.

Subject to amendment, errors excepted

BHB_skeye-dart_HW90240_1-04_EN.doc

TABLE OF CONTENTS

19.05.2010 • 1.04 3

Table of contents

Introduction ................................................................................................. 5

1.1

Document In ormation ............................................................................... 5

1.2

Changes ................................................................................................... 5

1.3

Terminology.............................................................................................. 5

1.4

Readership................................................................................................ 6

1.5

Intended Use ............................................................................................ 6

1.6

Sa ety Notes ............................................................................................. 6

1.6.1

General Sa ety Notes ........................................................................... 6

1.6.2

Sa ety Notes or the Lithium-Ion Battery................................................. 7

1.6.3

Sa ety Notes or the Communication Cradle/ Battery Charger...................11

1.6.4

Sa ety Notes or the Power Supply ........................................................11

1.6.5

Sa ety Notes on the Camera/Imager with LED Aimer (optional) ................12

1.6.6

Sa ety Notes on GSM/GPRS/EDGE (optional) ..........................................12

1.6.7

Sa ety Notes on Wireless LAN/Bluetooth ................................................13

1.6.8

Sa ety Notes on Data Loss ...................................................................13

1.7

Disposal ..................................................................................................13

1.8

Explanations on this Manual .......................................................................14

1.8.1

Note Pictograms .................................................................................14

1.8.2

Registered Trademark .........................................................................15

skeye.dart................................................................................................... 16

2.1

Variants o the Base Types.........................................................................16

2.2

Accessories ..............................................................................................17

2.3

Communication Cradle ..............................................................................17

2.4

Hardware Equipment.................................................................................17

2.5

So tware Equipment..................................................................................17

2.6

Views ......................................................................................................18

2.6.1

Front View .........................................................................................18

2.6.2

Side View...........................................................................................19

2.6.3

Rear View ..........................................................................................19

2.7

LED Function Displays ...............................................................................19

Taking into Operation ................................................................................. 20

3.1

Switching on the Backup Battery ................................................................20

3.2

Inserting the Micro SD Card .......................................................................21

3.3

Insertions o the SIM Card .........................................................................22

3.4

Battery ....................................................................................................23

3.4.1

Inserting the Battery ...........................................................................23

3.4.2

Replacing the Battery ..........................................................................24

3.4.3

Charging the Battery ...........................................................................24

3.5

Switching On/Switching O the skeye.dart...................................................25

3.5.1

Switching On......................................................................................25

3.5.2

Switching O the skeye.dart ................................................................25

3.5.2.1

Suspend Mode ..............................................................................25

3.5.2.2

Automatic Standby – Power Supply .................................................27

3.5.2.3

Complete Power O by Removing the Battery ...................................28

Initial Steps ................................................................................................ 2

4.1

Operating the skeye.dart with the Stylus .....................................................29

4.2

Microso t Windows CE – Basics ...................................................................30

4.2.1

Start Screen.......................................................................................30

4.2.2

Start Menu.........................................................................................30

4.2.3

Desktop Symbols ................................................................................31

4.2.4

Taskbar .............................................................................................31

4.2.5

Right Mouse Button Function ................................................................32

4.2.6

Showing/Hiding the Keyboard...............................................................32

TABLE OF CONTENTS

4 1.04 • 19.05.2010

4.2.7

Basic Settings.....................................................................................32

4.2.7.1

Calibrating the Touch Screen ..........................................................33

4.2.7.2

Setting the Brightness ...................................................................35

Further Functions and Settings................................................................... 36

5.1

Setting o Display Orientation and -Dissolution .............................................36

5.2

Scan o Barcodes ......................................................................................36

5.3

Scan Keys................................................................................................37

5.4

SysAP......................................................................................................37

5.5

Soundset .................................................................................................38

5.6

System In o .............................................................................................39

5.7

SysBackup ...............................................................................................40

5.7.1

Calling SysBackup...............................................................................41

5.7.2

Creating a Backup...............................................................................42

5.7.3

Restoring the Backup ..........................................................................43

5.7.4

Deleting a Backup...............................................................................44

Radio .......................................................................................................... 45

6.1

Wireless LAN ............................................................................................45

6.1.1

Wireless LAN Network Settings .............................................................45

6.1.2

Wireless LAN Con iguration ..................................................................46

6.1.3

Entering the Network ID ......................................................................48

6.2

GSM Control.............................................................................................49

6.2.1

Establishing a Connection ....................................................................49

6.2.2

Further Settings .................................................................................51

6.2.2.1

Persistent Setting o the PIN Number...............................................51

6.2.2.2

General Settings ...........................................................................52

6.2.2.3

APN .............................................................................................53

6.2.2.4

GSM In o......................................................................................53

6.3

GPS Module .............................................................................................54

Communication Cradles .............................................................................. 55

7.1

Communucation Cradle (USB Standard) ......................................................55

7.2

Technical Data..........................................................................................55

7.3

Charging the Battery in the Communication Cradle .......................................56

7.4

Connecting the Communication Cradle to the Desktop PC ..............................56

7.5

Desktop Cradle (USB with Battery Charger) .................................................57

7.6

Technical Data..........................................................................................57

7.7

Charging the Battery in the battery charger slot ...........................................58

7.8

Communication skeye.dart ⇔ PC ................................................................59

7.9

Application o USB Host .............................................................................60

Technical Data ............................................................................................ 61

Troubleshooting.......................................................................................... 62

9.1

Reset via So tware ....................................................................................62

9.2

Reset via Hardware ...................................................................................62

INTRODUCTION

Document In ormation

19.05.2010 • 1.04 5

1. Introduction

The skeye.dart is a modern industrial PDA. It has been designed or the use as

sel scanning terminal or mobile terminal or ield applications. You can choose

between several variants.

With protection level IP54 against dust and moisture and drop protection o 1.20 m

the skeye.dart is proper or the use in rough environments.

1.1 Document Information

Product: skeye.dart

Type o Document: User Guide

Version: 1.04

Author: Lin / Hö t & Wessel AG, Hannover

1.2 Changes

Version: Changes: Date: By:

01.00 First version 09.01.2009 Lin

01.01 Hint backup battery clari ied 21.04.2009

Lin

01.02 Adjusted to current techn. status/edited 18.05.2009

Esp/Lin

01.03 New chapters: Insertion o the SIM card; GSM

service; Establishing a GPRS connection; SysApp;

SysBackup; Soundset; GPS module Revision

16.11.2009

Lin

01.04 Enhanced by keye.dart PBV and XKE Lin

1.3 Terminology

skeye.dart

HW 90240

Portable Data Terminal (in the ollowing re erred as “mobile

terminal”) with WLAN IEEE 802.11b/g and Bluetooth 2.0

skeye.dart FFE

HW 90240 FFE

Like the skeye.dart, additionally with GSM/GPRS/EDGE and

GPS

skeye.dart PBV

HW 90240 PBV

Like the skeye.dart, additionally with headset connection

("Pick-by-Voice")

skeye.dart XKE

HW 90241 XKE

Like the skeye.dart, additionally with 31 key keyboard

("Extended Keyboard Edition")

Battery HW 19240 The mobile terminal is supplied by a rechargeable lithium-

ion battery

Communication cradle USB

HW 50240

Communication cradle with USB inter ace or the mobile

terminal (Standard)

Desktop cradle USB

HW 50242

Communication cradle with USB inter ace or the mobile

terminal (with additional battery charging compartment)

Power supply unit Wide range switched mode power supply unit to provide the

mobile terminal and the communication cradle with power.

Passive holder HW 51240 For installation o the skeye.dart in vehicles and or charging

o the battery.

INTRODUCTION

Readership

6 1.04 • 19.05.2010

1.4 Readership

The documentation is intended or people operating the skeye.dart.

1.5 Intended Use

The skeye.dart has been designed or use in the commercial sector and or

acquiring and trans erring data within buildings or vehicles or outside under

moderate climate conditions.

The skeye.dart is not intended or distribution to private households.

Please pay attention to the in ormation o this user guide, especially the sa ety

notes. Intended use means that the device must only be used and operated in

accordance with the in ormation contained herein. Any other use is not an intended

use and may lead to property damage or even personal injury. Hö t & Wessel does

not accept any liability or damages caused by a usage other than the intended

usage.

1.6 Safety Notes

Care ully read and ollow the user manual and the sa ety in ormation mentioned in

this chapter be ore per orming urther steps. You have to:

•read

•keep the in ormation in mind during work.

This is the precondition or

•secure working with the product

•undisturbed handling

1.6.1 General Safety Notes

Transport and Storage:

♦The device must only be shipped in original or comparable robust packaging.

Shipping the device e.g. in a normal padded bag does not provide su icient impact

and pressure protection.

Such improper packaging would all under the de inition o the term Negligence.

Handling:

♦Never expose the skeye.dart to very high temperatures or a long time.

♦Never insert any objects not intended or use with this device in the instrument’s

openings. This might damage the device.

Operating:

♦Do not dip the skeye.dart into luid.

♦Only use your skeye.dart with original equipment. Non-compliance voids the

warranty.

♦Do not operate your skeye.dart when you are in explosive areas, or instance in

petrol stations, uel depots, chemical plants, below deck in ships, near blasting

operations, in locations where a large volume o dust particles (such as lour, wood

or metal) is present in the air, etc.

INTRODUCTION

Sa ety Notes

19.05.2010 • 1.04 7

We recommend to switch o the device completely. This also applies to places

where you are usually advised to switch o your vehicle motor.

♦Do not operate in close range o strong electromagnetic ields. Failures may be

caused.

♦Inter erence may be noticed near electric devices. There ore, always pay attention

to local sa ety regulations.

♦Users with hearings aids must note that radio signals o electronic devices (with

radio equipment) may launch into hearing devices causing an unpleasant noise.

Maintenance, Service and disturbances:

♦The skeye.dart is – apart rom charging o battery and the mentioned comments –

li etime maintenance- ree and does not need special care.

♦Do not try to open, repair or modi y your skeye.dart. The manu acturer will not be

liable or any damage caused in that way. Apart rom other things, the unction or

correctly charging the battery may be in luenced. As a result, excessive charging

voltage, uncontrolled charging and discharge current, leakage o harm ul

substances, excessive heat generation, bursting or ire may occur.

♦Any tampering by non-authorised persons will invalidate the warranty.

♦I your skeye.dart needs to be repaired or maintained, please contact your

specialised dealer.

♦Clean the housing only with damp cloth and mild detergent.

1.6.2 Safety Notes for the Lithium-Ion Battery

Care ully read the ollowing sa ety notes to prevent an incorrect handling o the

battery and to avoid possible dangers.

Non-observance of the safety information or incorrect use of the battery

can lead to excessive current flow, to the discharge of harmful substances,

excessive heat development, explosion or fire.

Transportation and storage:

♦Do not transport or store the battery together with metal objects such as necklaces,

hairpins, etc. Doing so may short circuit the battery, which could result in excessive

current low and possibly cause leakage o battery luid, heat generation, bursting

or ire. When carrying or storing batteries, use an electrically nonconductive

(insulated) case.

♦When the equipment is expected not to be used or a long time do not store the

batteries exceeding the appropriate conditions as listed below. Otherwise its

per ormance will be degraded and its service li e will be decreased.

▪when the batteries are discharged and remain in the equipment: 1 week

▪when the batteries are ully charged and remain in the switched o

equipment: 1 month

▪long-term storage: see next note.

♦When the battery is expected not to be used or a long time, take the battery out o

the equipment and store it in a dry place at or below room temperature. For an

optimum service li e, the battery should be charged up to 20 to 40% when being

stored. A ter 12 months at the latest the device should be charged and

subsequently discharged. Otherwise, its per ormance will be degenerate and its

service li e will be decreased.

INTRODUCTION

Sa ety Notes

8 1.04 • 19.05.2010

♦Switch o the backup battery i you do not use the device or a longer time (see

chapter 3.1)

♦Store the battery in a location where children cannot reach it. Also make sure that a

child does not take out the battery rom the charger or equipment being used. I a

child swallows a battery, seek medical attention immediately.

♦The storage temperature must not be below –20 or above +50°C.

Ambient conditions:

♦The temperature may not be outside the admissible operating and storage

temperature range o -20 to +50 degrees centigrade. The temperature may be

within the range o 0 °C to +40 °C during charging.

♦Do not discard the battery into ire and do not leave it in a hot place such as near a

ire or on a heater. Doing so melt the insulation, damage the sealing parts or

protective devices, cause leakage o battery luid (Electrolyte) rom the batteries,

bursting or ire.

♦Do not immerse batteries in water or seawater, and do not allow them to become

wet. Batteries which have become wet must always be replaced with new ones

because internal short-circuits can cause dangerous heat emissions i urther used.

♦Do not throw batteries, and do not allow them to all on hard sur aces.

Connection:

♦Do not connect the battery to an electrical outlet, e.g. vehicle cigarette lighter,

power outlets, other power supply units, other charger, etc.

♦Do not reverse the positive (+) and negative (-) terminals when inserting the

battery. Since the mechanical design o the battery enables you to insert in one

direction only, the battery must not be inserted into the opposite direction by orce.

Handling:

♦Protective devices to prevent danger are built into the battery. To ensure or a

proper operation, do not disassemble the battery or modi y parts o it. I they are

damaged, this could result in excessive charging voltage, control loss during

charging or discharging, leakage o battery luid, heat generation, bursting or ire.

♦Do not disassemble Li-ion bare cells o the battery. There is the danger o lammable

luid being spilt. It may also cause an internal or external short circuit, leakage o

battery luid, heat generation, bursting or ire.

♦Do not directly solder the battery. Doing so melt the insulation, damage the sealing

parts or protective devices, cause leakage o battery luid (Electrolyte) rom the

batteries, bursting or ire.

♦Do not short-circuit the battery by directly connecting the positive (+) and negative

(-) terminals with objects such as wire. Short circuiting generates heat which may

damage the equipment. In the worst case this could result in leakage o battery

luid, bursting or ire.

♦Do not put the battery into a microwave oven or pressurised container. This could

result in leakage o battery luid, bursting or ire.

♦Do not pierce the battery with a nail or other sharp object, hit it with a hammer, or

step on it. This could result in leakage o battery luid, bursting or ire.

INTRODUCTION

Sa ety Notes

19.05.2010 • 1.04

Operation:

♦For operation o the device use the delivered battery only. Please use the battery

only or the determined purpose.

♦Do not use the battery in any device other than those speci ied in this manual.

Depending on the device being used, doing so may cause abnormal current low,

leakage o battery luid, heat generation, bursting or ire.

♦I the battery becomes discolored or de ormed, or in any way appears abnormal,

stop using it. Return it to the distributor or manu acturer rom whom you purchased

it.

♦Do not use or leave the battery in very high temperatures ( or example, under

strong direct sunlight). Otherwise, it may cause leakage o battery luid, bursting or

ire or its per ormance will be degenerate and its service li e will be decreased.

♦To ensure sa ety, the battery incorporates built-in sa ety devices. Do not use it in a

location where static electricity is greater than what the manu acturer guarantees.

Otherwise, the sa ety devices may be damaged, causing leakage o battery luid,

expose o ire.

♦Do not use the battery in other than the ollowing conditions. Otherwise, it can

overheat or ire, or its per ormance will be degenerate and its service li e will be

decreased.

▪when the battery is charged: 0 °C ~ +40 °C

▪when the battery is discharged or stored: -10 °C ~ +50 °C

Note: higher temperatures increase the sel -discharge o the battery.

♦Do not use the battery in combination with primary batteries (such as dry-cell

batteries) or batteries o di erent capacities or brands. That may cause leakage o

battery luid, heat generation, bursting or ire.

♦Do not connect di erent assembled batteries together. And also do not connect

same assembled batteries in series, unless explicitly instructed by the user

in ormation to do so.

Charging:

♦When recharging, only use the battery charger specially provided by Skeye. Failure

to ollow proper charging procedures may cause excessive voltage, excessive

current low, loss o control during charging, leakage o battery luid, heat

generation, bursting, or ire.

♦Do not use or charge the battery near a heat source such as ire or heater or in

extremely hot weather.

♦Do not charge a battery when it is cold (below 0 °C). This may cause impaired

per ormance and shortening o battery service li e.

♦I a battery is to be used or the irst time or it has not been used or a long time,

be sure to charge it.

INTRODUCTION

Sa ety Notes

10 1.04 • 19.05.2010

Health hazards:

♦I a battery leaks, and the electrolyte enters the eye, do not rub but rinse out

thoroughly under lowing water and then seek medical assistance. Otherwise, eye

damage can result.

♦I a battery leaks and the electrolyte makes contact with clothing or the skin, the

skin or clothing must be rinsed out under lowing water in order to prevent damage

to the skin.

Maintenance, service and disturbances:

♦Lithium-ion batteries have a predetermined operating li e. I the operating time

shortens excessively, this means that the battery li e has expired. I it comes to

that point, stop use immediately and replace with new batteries.

♦Lithium-ion battery is a designated product o Recycle. The battery a ter using is a

valuable resource. The return o the batteries ensures reuse o the chemicals

contained. This recycling process avoids any impact to the environment.

Hö t & Wessel guarantees that all batteries returned are ed to the recycling

process.

When a battery is no longer usable, discharge it. When you dispose o the Lithium

battery, insulate it by wrapping the terminals with tape. Mixing the battery with

other metals or batteries may lead to ire, heat, or explosion.

Then, return the battery to Hö t & Wessel. As a part o its normal service,

Hö t & Wessel guarantees that all used batteries are ed to the recycling process.

See also extract rom BattV (Decree or the return and disposal o used batteries

and accumulators, Germany) as o 09.09.2001:

„The manufacturers are obliged to take back and reuse toxic containing

batteries according to the regulations and dispose of non-reusable batteries that

have been handed in by distributors (§5) or public disposal departments (§9) “

♦I Lithium-ion batteries are not ully charged a ter the battery charger’s

predetermined charging period has elapsed, stop the charging process. Prolonged

charging may cause leakage o battery luid, heat generation or bursting o ire.

♦I the battery leaks or gives o a bad odor, remove it rom any exposed lame.

Otherwise, the leaking electrolyte may catch ire, and the battery may explode or

ire.

♦I the battery gives o an odor, generates heat, becomes discolored or de ormed, or

in any way appears abnormal during use, recharching or storage, immediately

remove it rom the device or battery charger and stop using it.

♦In case the battery terminals are dirty, clean the terminals with a dry cloth be ore

use, otherwise, the contact with equipment may cause insu iciency, and power

ailure or charge ailure.

Other manuals for HW 90240

This manual suits for next models

Table of contents

Other skeye. PDA manuals

skeye.

skeye. HW 90240 User manual

skeye.

skeye. HW 90240 User manual

Popular PDA manuals by other brands

SPOT

SPOT SPOT user guide

Palm

Palm handheld Getting started guide

Winmate

Winmate E500QK user guide

Getac

Getac PS236 Specifications

Sharp

Sharp CE-1600P Operation manual

HTC

HTC PHAR100 user manual

Mindeo

Mindeo M40 Reference manual

Acer

Acer n30 manual

ASCOM

ASCOM 9D24 EX brochure

Unitech

Unitech PA520BTNF user manual

HandHeld

HandHeld Nautiz X3 user manual

Casio

Casio PALM manual

Sharp

Sharp TM-20 Software guide

Atid

Atid AT870 quick guide

AML

AML M7225 user guide

Audiovox

Audiovox Maestro Quick start card

Casio

Casio PV-750 Plus Function guide

Unitech

Unitech PT630 Programming reference guide