Sisgeo Archimede User manual
User Manual
PORTABLE DATALOGGER & ACCESSORIES
rev.5 -03.12.2019-
Archimede Datalogger
Archimede Datalogger
FW ver.0.7.0
2| P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
INDEX
NOTE ON SYSTEM UTILIZATION Pag.4
WASTE DISPOSAL Pag.5
SYMBOLOGY Pag.5
IDENTIFICATION PLATE Pag.6
DL OVERVIEW Pag.7
INTRODUCTION Pag.7
LEONARDO (0CDL200UN00) Pag.8
new LEONARDO (0CDL400N000) Pag.9
GALILEO (0CDL100VW00) Pag.10
ARCHIMEDE (0CDL300INCL) Pag.11
ACCESSORIES and SPARE PARTS Pag.12
DL STORAGE AND TRANSPORT Pag.12
BATTERIES Pag.13
Battery charger Pag.13
Internal temperature Pag.14
How to use the battery charge Pag.14
Charge cycle and LED indications Pag.14
KEYBOARD Pag.15
THE USER INTERFACE Pag.16
Text boxes Pag.20
Buttons Pag.21
Lists Pag.21
Radio buttons Pag.22
Tuning backlight Pag.22
On line help Pag.22
THE MAIN MENU Pag.23
CONFIGURING SITES Pag.24
CONFIGURING PROBES Pag.26
PROBE CALIBRATION (FOR ANALOG PROBE) Pag.31
POLYNOMIAL CALIBRATION (FOR ANALOG PROBE) Pag.32
CONFIGURING INCLINOMETER TUBES Pag.33
READING INCLINOMETER TUBES Pag.35
INCLINOMETER TESTS Pag.39
3| P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
SPIRALOMETER TESTS Pag.43
T-REX TEST Pag.44
INCLINOMETER READINGS VISUALIZATION Pag.46
Inclinometric Test Graph Pag.46
T-Rex Graph Pag.48
MANUAL READING Pag.50
USING THE USB INTERFACE Pag.52
USE WITH SMART EXPORT and SMART MANAGER Pag.52
USE WITH SMART DATACAL Pag.53
USE WITH SMART REMOTE Pag.54
UTILITIES Pag.56
SETTING DATE and TIME Pag.56
CHECKING DL STATUS Pag.57
CHECKING USER INTERFACE LANGUAGE Pag.58
TROUBLESHOOTING Pag.59
ASSISTANCE Pag.61
Recalibration Pag.61
Repairs and maintenances Pag.61
Phone assistance Pag.61
Technical assistance on site for the supplied instrumentations Pag.61
Training Pag.61
INSTRUMENTS LIST Pag.62
Probes / Digital Probles Pag.62
SPECIAL KEYBOARD COMBINATIONS Pag.63
Switch ON Pag.63
Switch OFF Pag.63
Emergency reset Pag.63
Firmware upgrade Pag.63
EARLIER FIRMWARE VERSION Pag.64
4| P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
To ensure a safe and efficient functioning, please read the following
instructions carefully before use.
Any unauthorized modification is considered a total responsibility of the user.
In addition to the standards listed above, the user must comply with the existing legislation on
safety and health of employees in the workplace.
Verify that the product is intact, without damages caused by transport.
Verify that your package includes all the standard accessories and any optional accessory required.
In case, contact SISGEO or the distributor.
The use of the portable datalogger shall be done only after the proper connections have been
done and following the necessary configuration, therefore the user must carefully perform all the
operations described herein.
SISGEO will not be liable for inconveniences, damages, accidents, etc. due to the lack of knowledge
(or non-application) of the requirements contained in this manual.
The use, any possible maintenance or repair of the equipment is allowed only to skilled and
authorized operators. These operators must be physically, professionally and intellectually capable.
For information or orders of spare parts, always specify the Serial Number written on the label on
the back side of the portable datalogger.
When replacing parts, use only ORIGINAL SPARE PARTS. The use of unoriginal SISGEO spare parts
may cause irregular functioning and dangers for people and objects
The product is not suitable for installations in small and/or unventilated environments, with a high
humidity range or in the presence of inflammable or explosive liquids. All the supplied instruments
and equipment are not suitable for installations in potential dangerous areas or where explosion-
proof components are used.
The electrical connections must be executed by a qualified technician, observing all the
regulations in force.
The manufacturer reserves the right to make changes, in case of any manufacturing or commercial
need, without notice. Even so, the manufacturer will attempt to ensure that user manuals are
updated in order to reflect functional product revisions.
NOTE ON SYSTEM UTILIZATION
5| P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
According to the European directive 2002/96/CE, the disused instrument must
be disposed correctly. The recyclable materials are recovered, in order to
avoid any environmental damage.
For more information please contact your waste disposal service or the
instrument retailer.
Here below are reported the symbols used in this manual to alert the reader:
Attention! This operation must be executed only by specialized personnel.
Pay particular attention to the following information.
WASTE DISPOSAL
SYMBOLOGY
6| P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
Each portable datalogger has two types of identification plates.
One of these reports the product registration Serial Number and it is positioned on the back side of
the DL.
It is important to communicate the Serial Number of the product when you are
requesting information about it.
The second plate is always located on the back side of the DL.
Follow the requirements on the plates. Failure to comply with these
requirements could result in damage to the device and danger to
the operator.
IDENTIFICATION PLATE
7| P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
Depending on the model of your portable DataLogger (DL), it is possible to read different
instruments:
Analog
Digital RS485
Modbus RTU
Probe
Vibrating wire
Leonardo
New Leonardo
Galileo
Archimede
For further details on instruments model, please see “INSTRUMENTS LIST”
paragraph.
INTRODUCTION
Keyboard
Display TFT
Jack Plug for battery charger
DL OVERVIEW
Archimede Datalogger
DL model
Mini USB Connector for
PC connection/ record key
MIL Connector for
instrument connection
8| P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
The Leonardo DL has been developed to make and store
readings obtained from different analog and digital
instruments (except for vibrating wire instruments);
Leonardo DL can’t perform inclinometer tests.
I
The Leonardo DL is mainly composed by:
Shoulder and shipment bag (0CDL0BAG927)
Battery charger for NiMH batteries (0ECAB12VNMB)
Flying cable: 1 MIL connector and 6 alligator clips + ground (0ECAV7P6A00)
IP68 USB cable for PC connection
USB flash drive (Manuals, Smart Manager Suite)
LEONARDO (0CDL200UN00)
Shipment bag
Shoulder bag
Flying cable
USB cable
Battery charger
9| P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
The new Leonardo DL has been developed to make and
store readings obtained from various instruments,
including analog, digital and vibrating wire instruments.
The new Leonardo DL is mainly composed by:
Shoulder and shipment bag (0CDL0BAG927)
Battery charger for NiMH batteries (0ECAB12VNMB)
Flying cable: 1 MIL connector and 6 alligator clips + ground (0ECAV7P6A00)
IP68 USB cable for PC connection
USB flash drive (Manuals, Smart Manager Suite)
new LEONARDO (0CDL400N000)
Shipment bag
Shoulder bag
Flying cable
USB cable
Battery charger
10 | P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
The Galileo DL has been developed to make and store
readings obtained from vibrating wire instruments
(and NTC thermistor).
The Galileo DL is mainly composed by:
Shoulder and shipment bag (0CDL0BAG927)
Battery charger for NiMH batteries (0ECAB12VNMB)
Flying cable: 1 MIL connector and 4 alligator clips + ground (0ECAV7P4A00)
IP68 USB cable for PC connection
USB flash drive (Manuals, Smart Manager Suite)
GALILEO (0CDL100VW00)
Shipment bag
Shoulder bag
Flying cable
USB cable
Battery charger
This manual suits for next models
7
Table of contents
