Sirus WXM-800 User manual
WXM-800 SET UP PROCEDURE
WXM-800
Please set up the Receiver first:
1. Press POWER for about 3 seconds until the LCD displaying "CH 11"or "864.000MHz";
2.Press the SET for around 3 seconds, you will enter the setup status when displaying
flashed "SETUP"
3.Press "▲", LCD will display the channels or the frequencies, "CH 12" or "864.100MHz"
etc.; Press "▼" LCD will display the channels or the frequencies, "CH 10" or
"863.900MHz" etc.
4 .Press "SET", LCD will display "SCAN", then press "▲" or "▼" searching for the
frequency sent out by Transmitter.
5.Press "SET", LCD shows "SQL", press "▲" or "▼" to change the noise sensitivity.
6.Press SET, LCD dispays "ID 10", press "▲" or "▼" to revise the ID Numbe. For
example: displaying "ID 9" after you pressed "▼";
7.Press SET, displaying "DIS CHN" or "DIS FRQ", press "▲" or "▼" choosing the
channels and frequencies displayed;
8.Press SET for 3 seconds, exit the setup procedure.
Setup the Transmitter secondly:
1.Press POWER button for about 3 seconds, until the LCD displaying "CH 11" or
"864.000MHz";
2.Press the SET for around 3 seconds, you will enter the setup status when displaying
flashed "SETUP"
3.Press "UP", LCD will display the channels or the frequencies, "CH 12" or "864.100MHz"
etc.;Press "DN" LCD will display the channels or the frequencies,"CH 10" or "
863.900MHz" etc.
4.Press SET, LCD dispays "ID 10", press "UP" or "DN" to revise the ID Number. For
example: displaying "ID 9"after you pressed "DN";
5.Press"SET", LCD shows "SQL", press "UP" or "DN" so as to change the noise
sensitivity.
6.Press SET for 3 seconds, exit the setup procedure.
NOTICE:
1.When finish the setup, make sure to quit this procedure so as not to affect the normal
operarion; if you didn't exit the setup status, the system will exit automatically.
2.ID Number on A and B channel on the Receiver can not be the same; the ID Number
here only used as channel identification.
3.Frequency on A and B channel on the Receiver must be different from each other; the
frequency must be at an interval of no less than 300KHz.
four
mix”
12V 1000
Other Sirus Microphone System manuals
Popular Microphone System manuals by other brands
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 quick guide
Alpha Technologies
Alpha Technologies RBMS Installation & operation manual
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 user manual
Shure
Shure UA844 user guide
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM operating instructions
Pyle
Pyle PDWM5000 user manual