Sirius Technologies ST301U User manual
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
1
ST301U/ST302U
USB Data Logger
Table of Content
1. Specifications………………………………………………..….………Page 2
2. Data Logger Content………………………………………...……….. Page 3
3. Installation Requirement…………………………………….………..Page 3
4. Hardware Setup……………………………………………….………Page4-9
5. Software Installation……………………………………….……..Page 10-15
6. Data Logger Setup…..…………………..………………………..Page 16-22
7. Data Logger Data Download……………...…………….……....Page 23-29
8. Using other software functions…………………………………Page 30-34
File
Logger
View
Test COM port
9. Warranty…………………………………………………………..…Page 35
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
2
1. Specifications
Specifications
Model #
ST301U
ST302U
Type
Temperature
Temperature/Humidity
Channels
1
2
Range
-20°C to 70°C
-40°C to 85°C
Temp. Accuracy
±0.7°C at 21°C
±0.7°C@25°C
Humidity Range
0-100% RH
Humidity Accuracy
2.5% Rh (20-80%Rh)
Resolution
12 Bits
12 Bits
Memory
64K
128K
Interface
USB
USB
# of reading
30,000
60,000(30K Pairs)
Sensor
Internal
Internal
Sensor
Thermistor
Temp/Hum
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
3
2. Data Logger Content
1. Data Logger Unit
2. USB Cable
3. Installation Disk
3. Installation Requirements:
Minimum system requirements for the software
-Pentium III - 500 MHz processor or equivalent with 128 Megabytes of RAM.
Optimal Performance:
-Pentium 4 - 2.8 gigahertz processor or equivalent with 256 Megs or ram
Operating System Requirements:
-Windows 2000
-Windows XP
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
4
4. Hardware Setup
4.1.- Connect small end of cable to the data logger.
4.2.- Connect large end of the cable to PC’s USB port.
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
5
4.3.- Found New Hardware
Window will identify ST300’s USB connection driver as” CP2103 USB to UART Bridge
Controller”
Fig. 4.3.
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
6
4.4. Ready to Use
Window will install the USB driver automatically. It only needs to install once.
The message “Found New Hardware- Your new hardware is installed and ready to use.”
confirms the USB driver is successfully installed.
It’s ready to use.
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
7
4.5. Driver Verification
Click on Start, Click on Control Panel, Click on System, on click Hardware, Click on
Device Manager, Click on Port(COM and LPT).
Identify “CP210X USB to UART Bridge Controller”. If it’s there, the driver has been
successfully installed.
Fig. 4.5.1
Correct USB Driver property
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
8
4.5.2. Correct USB Driver property
Fig. 4.5.2.
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
9
4.5.3. Correct Driver Version- 5.1.0.0
Fig. 4.5.3.
Sirius Technologies ST301U/ST302U
USB Data Logger
Operating Manual V1.0
418-B Cloverleaf Dr. Baldwin Park, CA 91706
TEL:(626)934-0100 FAX:(626)934-0161 E-Mail: INFO@SIRIUSTEC.COM
10
5. Software Installation
5.1. Insert the CD into the disk drive.
Fig.5.1.
5.2. Click on Setup to start installation
Fig. 5.2
This manual suits for next models
1
Table of contents
Other Sirius Technologies Data Logger manuals
