SIRCHIE BLUEMAXX BM500LED Manual

Technical Information TI02ENG124R9

100 HUNTER PLACE, YOUNGSVILLE, NC 27596 USA

Ph: (919) 554-2244, (800) 356-7311 • Fax: (919) 554-2266, (800) 899-8181

Web: www.sirchie.com •Email: [email protected]

BLUEMAXXTM Rechargeable Forensic LED Light

BM500LED

Background and Purpose

The BLUEMAXX™ BM500LED is a rechargeable LED-based illuminator which emits high

intensity blue light at 455nm (nanometers). This wavelength can produce fluorescence in

physiological fluids and other materials treated with certain powders and dyes; in general,

materials having optical excitation bands between 390 and 520nm.

The kit has a pair of orange goggles that effectively filters the blue light, permitting visual

observation and photography of the fluorescence effect. The light is an essential tool for

area searches and photography of evidence at a crime scene, and provides best results

when used under subdued ambient lighting conditions.

Technical Information TI02ENG124R9

100 HUNTER PLACE, YOUNGSVILLE, NC 27596 USA

Ph: (919) 554-2244, (800) 356-7311 • Fax: (919) 554-2266, (800) 899-8181

Web: www.sirchie.com •Email: [email protected]

Unpacking / Set-up

Next unthread (rotate counter-clockwise) the tail cap from the body tube and install the

battery pack with the Positive (+) terminal of the pack (the raised “bump”) facing toward

the head-end of the light. Then fasten the tail cap by threading it (rotate clockwise) into the

body tube (shown below).

FIG 1: Battery Installation

Safety Precautions

CAUTION: Due to the intensity of the light, do not look directly into the beam.

Reversing the battery may permanently damage the flashlight and the battery pack.

Electrical Info

Battery: 6volt, 3.5 amp-Hr nickel metal hydride (Ni-Mh) battery pack

Switch: Recessed, push-on –push-off soft touch button

Illuminator: High output LED

Charger: Input : Universal voltage 100-240VAC, 50/60Hz, Output: 12VDC

Charge Rate: 220 –400 mA (typical)

Charge Time: Completely discharged battery : 12-16 hrs

Light Operation

The ON-OFF button is located at the base of the head cap. Press for ON. Press again for OFF.

Beam Adjustment

The head of the flashlight can be rotated slightly left or right in order to achieve the best

beam pattern for your use.

Charger Operation

The Charger Cradle may be used free-standing or permanently mounted to a surface, such

as a desk, wall or in a vehicle. Recessed mounting holes inside the cradle accept up to #8

mounting screws, which should be a minimum of 1 inch (25mm) long.

Technical Information TI02ENG124R9

100 HUNTER PLACE, YOUNGSVILLE, NC 27596 USA

Ph: (919) 554-2244, (800) 356-7311 • Fax: (919) 554-2266, (800) 899-8181

Web: www.sirchie.com •Email: [email protected]

Insert the Charger Plug head into its port at the front of the Cradle. Align the charge rings of

the light with contacts in the cradle and snap the BLUEMAXX into the Charging Cradle. The

Retainer Tabs will hold the light securely. The Contact Rings on the flashlight body will now

be touching the metallic Charging Contacts in the bottom of the Cradle, allowing the battery

to charge. To remove the light from the Charging Cradle, press the red release button then

lift the light straight up and out.

FIG 2: Charging Cradle Features FIG 3: Light Installed in Charging Cradle

Plug the universal power supply into a wall socket: domestic: 100-125VAC or international:

208-240VAC (using the supplied adapter on the power supply AC contact blades).

FIG 4: Power Supply –Domestic FIG 5: With International adapter blade

While charging, the Charging Indicator (on the top edge of the Charge Cradle) will be

red/orange. When the charge is complete, the Charging Indicator will be green.

CAUTIONS: While charging, do not let any conductive objects touch the Contact Rings on the

body of the flashlight. Only charge your BM500LED when the battery has completely

discharged (charging time in this case will be 12 - 16 hours). Do not store your BM500LED in

the charging cradle between uses as it will shorten the life of your battery pack.

Technical Information TI02ENG124R9

100 HUNTER PLACE, YOUNGSVILLE, NC 27596 USA

Ph: (919) 554-2244, (800) 356-7311 • Fax: (919) 554-2266, (800) 899-8181

Web: www.sirchie.com •Email: [email protected]

Cleaning and Maintenance

If the flashlight front cover filter becomes foggy or dirty, clean with a lens specific cloth

only. Do not use cleaners or water, as they will damage the filter coating. If the filter is

damaged or broken, please contact Sirchie Customer Service to order a replacement

Technical Specifications

•Illuminator: High output white LED with blue narrow-band 455nm filter cover glass

•Reflector: Parabolic, calibrated for 8"-10" (20.3cm - 25.4cm) spot at 10' (3m)

•Beam Pattern: Adjustable with 1/8 turn of head

•Construction: Rugged machined aluminum w/knurled grip, anodized inside and out

(corrosion, water, and shock resistant)

•ON-OFF Switch: Recessed, push-button (push ON, push OFF)

•Battery: Rechargeable 6 volt at 3.5 amp-Hr, nickel metal hydride (Ni-Mh) battery pack.

•Flashlight Length: 12.6" (32cm); Weight w/Battery pack: 32 oz. (907.2g)

•Light filter: Blue Additive Dichroic, T(ave)=60% (+/-7.5%) 380-480nm

T=50% @ 490nm(+/-10nm) T(ave)<1% 520-780nm

•Set of orange filter goggles

•Charger Cradle: Black ABS plastic “cradle/clamp” type

•Charger Power Supply: Universal voltage input 100 –240VAC (with adapter blade for

International operation), 50/60Hz; Output 12VDC @ 450mA

•Charging Contact: 360-degree positive contact around flashlight body

•Charging Indicator: Bi-color LED: red = charging, green = charge complete

•Charging Rate: 220 –400 mA (typical); Charging Time: 12 - 16 hrs (fully discharged battery)

Trouble Shooting Guidelines

Symptom(s)

Possible Cause(s)

Remedy Action(s)

No illumination

Battery missing

Install battery

Battery installed backward

Re-install observing correct polarity

Battery discharged

Charge battery

Battery defective

Contact Sirchie Customer Service

Switch defective

LED defective/burned out

Front cover filter opaque/damaged

Flashlight damaged internally

White light emitted

Blue filter missing/damaged

Replace blue dichroic filter

Table of contents

Other SIRCHIE Flashlight manuals

SIRCHIE

SIRCHIE BLUEMAXX BM500LED Manual

Popular Flashlight manuals by other brands

StreamLight

StreamLight PROPOLYMER 2AA operating instructions

StreamLight

StreamLight Stinger operating instructions

Silverline

Silverline 994024 manual

Gama Sonic

Gama Sonic 23i60065 instruction manual

Olympia

Olympia RG580 CREE XM-L2 user guide

EUFAB

EUFAB 13495 operating instructions

OLIGHT

OLIGHT S35 BATON Operator's manual

Kopp

Kopp Emergency Sensor Light manual

YLP

YLP PROFESSIONAL Series user manual

Light motion

Light motion GoBe owner's manual

MOB

MOB MO8622 user manual

EuroLite

EuroLite KKS-3 user manual

Carson

Carson 500907010 instruction manual

Duracell

Duracell 550 instructions

Mactronic

Mactronic Black Eye 1300 user manual

Eurotops

Eurotops 29780 instruction manual

MOB

MOB MO8690 user manual

Pelican

Pelican L1 1930 LED owner's manual