Singer 1507 User manual
1507 Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety should always be
followed, including the following:
Read all instructions before using this sewing machine.
1. An appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately
after using and before cleaning.
. Always unplug before re-lamping. Replace bulb with same type
rated 10 watts (110-120V area) or 15 watts (220-240V area).
1. Do not allow to be used as a toy. Close attention is necessary
when this appliance is used by or near children.
2. Use this appliance only for its intended use as described in this
manual. Use only attachments recommended by the manufacturer
as contained in this manual.
. Never operate this appliance if it has a damaged cord or plug, if it is
not working properly, if it has been dropped or damaged, or dropped
into water. Return the appliance to the nearest authorized dealer or
service center for examination, repair, electrical or mechanical
adjustment.
4. Never operate the appliance with any air openings blocked. Keep
ventilation openings of the sewing machine and foot controller free
from accumulation of lint, dust, and loose cloth.
5. Keep fingers away from all moving parts. Special care is required
around the sewing machine needle.
6. Always use the proper needle plate, The wrong plate can cause
the needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the needle
causing it to break.
9. Switch the sewing machine off ("O") when making any
adjustments in the needle area, such as threading needle,
changing needle, threading bobbin, or changing presser foot, and
the like.
10. Always unplug sewing machine from the electrical outlet when
removing covers, lubricating, or when making any other user
servicing adjustments mentioned in the instruction manual.
11. Never drop or insert any object into any opening.
12. Do not use outdoors.
1 . Do not operate where aerosol spray products are being used or
where oxygen is being administered.
14. To disconnect, turn all controls to the off ("O") position, then
remove plug from outlet.
15. Do not unplug by pulling on cord. To unplug, grasp the plug, not
the cord.
16. The sound pressure level under normal operating conditions is
75dB(A).
This sewing machine is intended for household use only.
DANGER
SAVE THESE INSTRUCTIONS
- To reduce the ris of electric shoc :
WARNING - To reduce the ris of burns, fire, electric
shoc , or injury to persons:
17. Please turn off the machine or unplug when the machine is not
operating properly.
18. Never place anything on the foot controller.
19. If the supply cord that fixed with foot controller is damaged, it must
be replaced by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
20. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
21. Children should be supervised to ensure that they do not play with
the appliance.
Congratulations
As the owner of a new Singer sewing machine, you are about to begin an exciting adventure in creativity.
From the moment you first use your machine, you will know you are sewing on one of the easiest to use
sewing machines ever made.
May we recommend that, before you start to use your sewing machine, you discover the many
advantages and the ease of operation by going through this instruction book, step by step, seated at your
machine.
To ensure that you are always provided with the most modern sewing capabilities, the manufacturer
reserves the right to change the appearance, design or accessories of this sewing machine when
considered necessary.
SINGER is a registered trademark of The Singer Company Limited or its affiliates.
©2010 The Singer Company Limited or its affiliates. All rights reserved.
List of contents
Principal parts of the machine ..................................................2/
Accessories.................................................................................4
Installing the snap-in sewing table ..............................................5
Connecting machine to power source .........................................6
Changing the bulb .......................................................................7
Raising the bobbin thread .........................................................16
Reverse sewing/ Removing the work/ Cutting the thread .........17
Matching needle/ fabric/ thread .................................................18
How to choose your pattern ......................................................19
Blind hem/ Lingerie stitch .........................................................22
Sewing on buttons.....................................................................2
Sew 4-step buttonholes.............................................................24
Zippers and piping.....................................................................25
Practical stitches ......................................................................28
Two-step presser foot lifter..........................................................8
Adjusting presser foot pressure...................................................8
Attaching the presser foot shank.................................................9
Winding the bobbin....................................................................10
Inserting the bobbin...................................................................11
Inserting and changing needles ................................................12
Threading the upper thread.......................................................1
Automatic needle threader (optional) ........................................14
Thread tension ..........................................................................15
Straight stitch and needle position ...........................................20
Zig-zag stitching ........................................................................21
Mutlti-stitch zig-zag/ Bar tack ....................................................26
Free motion darning, stippling ...................................................27
Applique and blindstitch applique..............................................29
Quilting functions....................................................................... 0
...................................................................
................................................................... 4
Gathering................................................................................... 5
................................................................................... 6
Maintenance.............................................................................. 8
Trouble shooting guide.............................................................. 9
Mending..................................................................................... 1
Stay-stitching............................................................................. 2
Blindstitch applique
Traditional pintucks
Couching
Trim attachment stitch function ................................................. 7
2
1. Thread tension dial
2. Presser foot pressure adjustment
. Thread take-up lever
4. Thread cutter
5. Presser foot
6. Needle plate
7. Removable sewing table/ accessory storage
8. Reverse sewing lever
9. Bobbin stopper
10. Stitch length dial
11. Pattern selector dial
12. Automatic threader (optional)
Principal parts of the machine
1
2
3
4
5
6
7
8
9
10
11
12
23
15
16
17
18
19
21
22
20
24
13
14
1 . Horizontal spool pin
14. Bobbin winder
15. Handwheel
16. Power and light switch
17. Main plug socket
18. Bobbin thread guide
19. Upper thread guide
20. Face plate
21. Handle
22. Presser foot lever
2 . Foot speed control
24. Power cord
Principal parts of the machine
4
Accessories
Standard accessories (1)
Optional accessories (2)
a. All purpose foot
b. Zipper foot
c. Buttonhole foot
d. Button sewing foot
e. L-screwdriver
f. Seam ripper/ brush
g. Oil bottle
h. Pack of needles
I. Bobbin ( x)
j.
k. Darning plate
l. Spool holder
(These 6 accessories are not supplied with this machine; they
are however available as special accessories from your local
dealer.)
m.
n. Overcasting foot
o. Hemmer foot
p. Blind hem foot
q. Satin stitch foot
r.
Edge/ quilting guide
Quilting/straight stitch foot
Darning/embroidery foot
ijl
g
eh
f
abcd
006806008 006905008 006909008 006914008
mo
n
00680 008 006800008
pqr
006016008006812008
1
2
006916008
006804008
5
1
2
Installing the snap-in sewing table
Hold the removable extension table horizontal, and push it in
the direction of the arrow. (1)
The inside of the removable extension table can be utilized as
an accessory box.
To open, flip cover down as shown. (2)
6
Connecting machine to power source
2
1
3
A
Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)
Unplug power cord when machine is not in use.
The foot control pedal regulates the sewing speed. ( )
Consult a qualified electrician if in doubt as to connect machine
to power source. Unplug power cord when machine is not in use.
The foot control must be used with the appliance by KD-1902
(110-120V area)/ KD-2902 (220-240V area) manufactured by
ZHEJIANG FOUNDER MOTOR CORPORATION LTD. (China)
4C- 26G (2 0V area) manufactured by Wakaho Electric Ind.
Co., Ltd. (Vietnam)
Press main switch (A) for power and light on " l ".
For appliance with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do
not modify the plug in any way.
Attention:
Foot control
Attention:
Sewing light
IMPORTANT NOTICE
Polarized attachment plug
Conductor intended
to be grounded
7
C
Changing the bulb
2
B
1
A
Disconnect the machine from the power supply by removing the
plug from the main socket!
Replace bulb with same type rated 10 watts (110-120V area) or
15 watts (220-240V area).
- Loosen screw (A) as illustrated. (1)
- Remove the face plate (B).
- Unscrew the bulb and install a new one (C). (2)
- Replace the face plate and tighten screw.
Should there be any problem, ask your local dealer for advice.
Other manuals for 1507
3
Other Singer Sewing Machine manuals
Singer
Singer U141A User manual
Singer
Singer 138W101 Quick start guide
Singer
Singer 2114 User manual
Singer
Singer Class 262 User manual
Singer
Singer M3330 User manual
Singer
Singer 5528 User manual
Singer
Singer 14SH644 Manual
Singer
Singer FEATHERWEIGHT FW-75 User manual
Singer
Singer DSX User manual
Singer
Singer 95-41 User manual
Singer
Singer 15K - MANUAL 2 User manual
Singer
Singer 95K32 User manual
Singer
Singer 6180 User manual
Singer
Singer Inspiration 4228 User manual
Singer
Singer 7-33 User manual
Singer
Singer 79-103 User manual
Singer
Singer 8P Manual
Singer
Singer XL-420 User manual
Singer
Singer 457G1 User manual
Singer
Singer Professional 5 User manual
