Singer 1022 User manual
The machine is intended for household use
IMPORTANT SAF TY
INSTRUCTIONS
When using an electrical appliance, basic safety precautions
should always be followed, including the following:
Read all instructions before using the sewing machine.
DANG R
To reduce the risk of electric shock:
1. An applicance should never be left unattended when plugged
in. Always unplug this appliance from the electric outlet im
mediately after using and before cleaning.
2. Always unplug before relamping. Replace bulb with same type
rated max. 15 Watts.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to
persons:
1. Do not allow to be used as a toy. Close attention is necessary
when this appliance is used by or near children.
2. Use this appliance only for its intended use as described in
this manual. Use only attachments recommended by the
manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or dama
ged, or dropped into water. Return the appliance to the nea
rest authorized dealer or service center for examination, re
pair, electrical or mechanical adjustment.
4. Never operate the appliance with any air openings blocked.
Keep ventilation openings of the sewing machine and foot
controller free from the accumulation of lint, dust, and loose
cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being
used or where oxygen is being administered.
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
8. To disconnect, turn all controls to the off (”0”) position, then
remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
10. Keep fingers away from all moving parts. Special care Is
required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can
cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the
needle causing it to break.
14. Switch the sewing machine off (”0”) when making any
adjustments in the needle area, such as threading needle,
changing needle, threading bobbin, or changing presser
foot, and the like.
15. Always unplug sewing machine from the electrical outlet
when removing covers, lubricating, or when making any
other user servicing adjustments mentioned in the instruc
tion manual.
16. Machine has be stored in dry and clean rooms to protect
against rust.
SAV THIS INSTRUCTION
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
CONT NTS
p
'age
Getting to Know Your Sewing Machine
..................
2
Principal Parts — And What They D
..................
.
2
Access ries — And When T Use Them
-----
6
Getting Ready to Sew
......................
Preliminary Steps
.......................
.
Ch sing Needle and Thread ...
Threading Y ur Sewing Machine
Straight Stiching
........
Adjusting Select rs
Sewing a Seam ...
Zick-Zack Stitching
Satin Stitching ...
Twin-Needle Stitching ..
Preparati n
...............
Threading the Needle
Buttons and Buttonholes
Butt ns ......................
Butt nh les
...............
Sewing the Professional Way
........
Lingerie, Seam finishes ..............
Hints n Sewing Special Fabrics
C nstructi n Details
...................
Aplique, Attaching elastic
...........
Free Arm Sewing
..........
............
Keeping Up Appearances
..........
Caring for Your Machine
.................................
Cleaning the Machine
..................
.
Rem ving B bbin Case, Face Plate and Bulb
Perf rmance Checklist
......................
.
.......
.
.
9
¡0
16
17
19
22
24
25
25
26
27
27
28
31
31
32
34
37
41
44
44
46
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
principal parts
19 Needle Thread 18 Needle Thread 17 Snap-in Thread 16 Spool Holder
Tension Discs
1 Bobbin-Winder
Tension Disc
2 Pressure
Dial
3 Take-up
Lever
4 Presser-
Foot Lifter
5 Thread
Cutter
15 Bobbin-Winder
14 Hand
Wheel
13 Sewing
Ughi
12 xtension Table
Release Push Button
8 Needle
Plate
10 Slide Plate 11 xtension
Table
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
and what they do
1. Bobbin-Winder Tension Disc regulates thread tension for bobbin
winding.
2. Pressure Dial regulates presser-foot pressure on fabric^ It has an all
purpose setting plus settings for extra-light and extra-heavy pressure,
and for darning.
3. Take-up Lever controls flow of needle thread.
4. Presser-Foot Lifter, at back of machine, allows you to raise and
lower presser foot. High-lift position allows easy placement of bulky
fabrics.
5. Thread Cutter is built into presser bar for safety and convenience.
6. Needle Clamp holds single and twin needles and is designed to
eliminate the possibility of inserting needle backwards.
7. Presser Foot h lds fabric against feed. The f t snaps ff f r quick
rem val.
8. Needle Plate lifts out for easy removal. Guidelines on right and left
sides extend to slide plate to help you keep seams straight.
9. Feed moves fabric under the presser foot.
10. Slide Plate pens f r easy rem val and replacement f the b bin, and
raises and l wers the pin that h lds the needle plate in p siti n.
11. xtension Table lets you convert the machine for either flat or tubular
bed sewing.
12. xtension Table Release Push Button unlocks the extension table.
13. Sewing Light illuminates the sewing area.
14. Hand Wheel positions take-up lever and needle. Always turn it
toward you.
15. Bobbin-Winder lets you fill the bobbin with thread quickly and easily.
16. Spool Holder with Horizontal Pin holds thread spools of various
sizes.
17. Snap-in Thread Guide Post provides smooth flow of thread from
spool holderto tension discs.
18. Needle-Thread Tension Dial lets y u select the appr priate tensi n f r
y ur stitch, thread, and fabric. The numbers eliminate guessw rk in
duplicating settings.
19. Needle-Thread Tension Discs, controlled by the tension dial,
regulate thre amount of tension on your needle thread.
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
PRINaPAL PARTS (C ntmued)
20. Siiteli Width Selector controls the width of zig-zag stitching and
pcsilions needle for straight stitching. Use ! setting for straight
si^tch^ng.
21V PJeecMe-Fositiion Selector places needle I n either left center or
rtchl stitching position. Use center position for straight stitching.
22. Stitch Coritroi Dial allows for a variety of stitch lengths, including 0-
1 for zig zag satin stitching.
23. Reverse-Stitch Push Bottoni lets ycu reverse stitching direction.
20 Stiich Widin Selector
2 Hceóìe- Pesiti on Selector
22 SrHcrf Centro D ol
23 Reverse-Stitch^"
Push Bovion
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
24. Hand Wheel Disc automatically disen
gages clutch for easy bobbin winding.
25. Transparent Bobbin shows thread
supply... is easily removed for bobbin
winding.
26. Power and Light Switch turns on
the power and the sewing ligh?
simultaneously.
27. lectrical Connections and Speed
Controller are designed for con
venience and safety.
See instructions for connecting and ope
rating machine and controller on page 9.
\ 26 Power
' ^ i / and
' " / Light Switch
/
/m
jL, !L
S
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
accessories... and when to use them
General Purpose
Foot
General Purpose
Needle Plate
G N RAL PURPOS FOOT
AND N DL PLAT
The general purp se f t and the general
purp se needle plate are in place n the
machine. Use them f r all utility sewing,
with either straight r zig-zag stitching.
ZIPP R FOOT
The zipper f t is used t place stitching
d se t a raised edge. It can be fitted t
the presser-f t shank f r use n either
right r left side f the needle.
SPECIAL PURPOSE FOOT
The special purp se f t is used f r a!!
kinds f dec rative zig-zag stitching. Use
this f t f r:
» Zig-zag satin stitching
® Appliqué
® Butt nh les
® Twin-needle stitching
Special Purpose Foot
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
F D-COV R PLAT
The feed-cover plate which allows free
fabric movement is used for darning
(page 43), embroidery and button sew
ing (page 27). By covering the feed
with the feed-cover plate the fabric is
not moveable.
CHANGING N DL PLAT
• Raise presser foot. (You do not need
to remove the foot.)
• Turn hand wheel toward you until
needle is in its highest position.
• Open slide plate with downward finger
pressure.
• Place thumb under needle plate and
draw plate to the right to remove.
• Insert new needle plate under locking
pin and over positioning pin.
• Close slide plate.
CHANGING PR SS R F T
The presser feet that are supplied with
your machine snap on and off a common
shank. To change the foot:
9 Raise presser-foot lifter and turn hand
wheel toward you to raise needle to Its
highest position.
» Press toe of presser foot upward (as
far as it will go) and then snap down
to remove the foot.
• Center the new presser foot under the
shank and lower the presser-foot lifter
so that shank fits over the presser-foot
pin.
• Press down on presser-foot screw until
foot snaps into place.
Changing Needle Plate
Changing Presser Foot
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik rka
maszynykrawieckie.shophurt.pl
This manual suits for next models
1
Table of contents
Other Singer Sewing Machine manuals
Singer
Singer 400W23 User manual
Singer
Singer 14SH754 - User manual
Singer
Singer 6214 User manual
Singer
Singer MX60 User manual
Singer
Singer 6021 User manual
Singer
Singer 451K2 User manual
Singer
Singer 24-70 Installation and operation manual
Singer
Singer 6105 User manual
Singer
Singer 95-10 User manual
Singer
Singer 106-10 User manual
Singer
Singer 20U-105C User manual
Singer
Singer 324 User manual
Singer
Singer 1669U 101 User manual
Singer
Singer Studio S18 User manual
Singer
Singer 4411 User manual
Singer
Singer 15K91 Setup guide
Singer
Singer 96-81 User manual
Singer
Singer 246-31 User manual
Singer
Singer 92-20 Quick start guide
Singer
Singer Tradition 2250 User manual
