Simrad NSO evo2 User manual

NSO evo2

QuickStart Guide

Turning the NSO evo2 system on and o

Press the Power key/button:

- on the front of the NSO evo2 Processor

- on the front of the monitor (depending on type of monitor and conﬁguration)

- on the OP40 remote controller (accessory)

- on the Home page or System Controls dialog (turning oﬀ only).

How to operate the system

The NSO evo2 multi-function system oﬀers several choices of operation:

Using the touchscreen: Multi-touch gestures for object selection and menu access.

Requires a touchscreen monitor in the system.

Using external controller: Keyboard, Mouse or Trackball connected via the USB port,

or OP40 remote controller connected via the network. For more details, refer to the NSO

evo2 Operator manual and the separate manual for the OP40.

System Controls dialog

Quick access to system settings,

changing between day and night

mode, turning oﬀ the NSO evo2

unit, etc.

Activate the dialog by swiping

from the top of the screen or by

pressing a Power button/key.

¼Note: The content of the System Controls dialog depends on connected

equipment and active panel.

988-393-002, 1/6

Home page

Activate the Home page by selecting the Home button.

Application buttons

Tools

Close button

Favorites

Man Over Board

(MOB) button

Power button

You can customize the Home page background by adding your own .png or .jpg ﬁle.

Positioning a MOB mark

Save a Man Over Board (MOB) mark at vessel’s position by selecting the MOB button on

the Home page.

Application pages

Activate an application page by:

• selecting the application button (full page panel), by

• selecting a favorites button, or by

• pressing and holding an application button to select a predeﬁned split page.

11. Status panel

2. Application

panel

3. Instrument bar

Adjust panel size

The size of the panels in a split page can be adjusted.

1. Select the adjust split button in the System Controls dialog to show the resize icon.

2. Drag the resize icon to set preferred panel size.

3. Save the changes by tapping the screen.

Edit a favorite page

Enter the Favorites edit mode by:

• selecting the Edit icon, or by

• pressing and holding a favorite button.

Edit favorite page

Delete favorite page

Add new favorite page

Edit an existing favorite page or conﬁgure a new page by dragging panel icons into or

out from the preview area.

To save the changes, tap the Save button.

Instrument bar

Select the Instrument bar button in the System Controls dialog

to turn the bar on/oﬀ.

To edit the content of the Instrument bar:

1. Tap the Instrument bar to make it active.

2. From the MENU, select the edit option.

3. Tap the item you want to change.

4. Select the information you want to display in the Instrument bar.

5. Select Finish editing in the menu to save the changes.

Charts

• Zoom the chart by using spread or pinch gestures

or by using the zoom buttons (A).

• Move the view in any direction by panning the

chart.

• Display information about a chart item by tapping

the item.

Waypoints

Save a waypoint at vessel’s position by selecting the new waypoint option in the menu.

Save a waypoint at selected position:

1. Tap the chart to place the cursor at selected position.

2. Select the new waypoint option in the menu.

Routes

Create a route:

1. Tap the chart to activate the cursor.

2. Select the new route option in the menu.

3. Tap the chart to position the ﬁrst routepoint.

4. Continue tapping the chart to position additional waypoints.

5. Save the route by selecting the save option in the menu.

Autorouting and EasyRouting (not available in the US)

1. Position at least two routepoints (ﬁrst and last in a route) or open an existing route

for editing.

2. From the menu, select Autorouting then Entire Route, if you want the system to

add new routepoints between ﬁrst and last routepoints; or choose Selection, if you

want to manually select the routepoints that deﬁne the limits for the autorouting.

3. Select Accept to start the autorouting.

4. Select Keep to accept the routepoints’ positions.

5. Save the route by selecting the save option in the menu.

First and last routepoint - Entire Route Result after Autorouting

Two routepoints selected (shown in red) Result after Autorouting

¼Note: These two features require compatible cartography:

Autorouting: Navionics+ and Navionics Platinum.

EasyRouting: Jeppesen CMAP MAX-N+.

Overlay

Add a radar, weather or StructureScan overlay on the chart by selecting the option in

the menu.

Navigating

Navigate to cursor’s position:

1. Tap the chart to position the cursor.

2. Select the Goto Cursor option in the menu.

Navigate a predeﬁned route:

• tap the route to make it active, then select the route

option in the menu followed by the start point, or

• select the route from the Routes dialog, then

select forward or reverse direction.

Echosounder

• Zoom the image by using the zoom buttons (A).

• View echosounder history by panning the

image.

• Adjust gain and color from the slide bar,

displayed by tapping the gain or color icon (B).

• Toggle auto gain on/oﬀ from the menu.

Toggle available echosounder frequencies from the menu. Available options depend on

type of transducers connected to the system.

Single

frequency

transducers

50 kHz Lower resolution images. Best performance in deep

water

83 kHz Greater water coverage

200 kHz High resolution images and better target separation

in shallow water

Chirp

transducers

Low CHIRP Lower resolution images. Best performance in deep

water

Medium CHIRP Better depth penetration than High CHIRP, but with

minimal loss of target deﬁnition

High CHIRP High resolution images and better target separation

in shallow water

StructureScan

• Select Downscan or Sidescan view from the

menu.

• Zoom the image by tapping the screen

to position the cursor, then tap the zoom

buttons (A).

• Adjust contrast manually from the slide bar,

displayed by tapping the Contrast icon (B).

Toggle between available StructureScan frequencies from the menu.

455 kHz Excellent resolution and greater range than 800 kHz

800 kHz Better deﬁnition than 455 kHz at shallower depths

Radar

• Turn the radar transmitting on/oﬀ from the

menu.

• Set the range by using the zoom icons (A).

• Adjust gain, sea clutter and rain clutter settings

from the slide bar, displayed by tapping the

settings icons (B).

Audio

Activate the Audio overlay by tapping the Audio tile in the Instrument bar.

Autopilot

The autopilot can be activated from any panel.

1. Tap the Autopilot tile in the Instrument bar.

2. Select the autopilot mode in the Autopilot pop-up.

SStandby Autopilot is passive. Used when manually steering at the helm

FU Follow-up * The rudder angle is set by OP40 (accessory). The rudder will be

moved to set angle

NFU Non-Follow-

The rudder movement is controlled by the Port and Starboard

buttons in the Autopilot pop-up, or by another NFU unit

AAuto Automatic steering: maintaining the set heading

NDNoDrift Automatic steering: keeping the vessel on a straight bearing

line by compensating for drift

NNavigation Automatic steering: navigating the vessel to a speciﬁc

waypoint or through a route using GPS data

WWind ** Automatic steering: maintaining the set wind angle

WNWind

navigation **

Automatic steering: navigating the vessel to a speciﬁc

waypoint or through a route using both wind and GPS data

* Not applicable for virtual rudder feedback conﬁgurations.

** Only available if the boat type is set to Sailboat.

¼Note: You switch the autopilot to Standby mode from any automatic mode by a

short press on the Standby button in the Autopilot pop-up.

Adjust set heading / course / wind angle

Adjust set heading (Auto mode), set wind angle (Wind mode) and

set course (NoDrift mode) by tapping the Port or Starboard but-

tons in the autopilot pop-up.

For more details, see the NSO evo2 Operator manual.

Other manuals for NSO evo2

Table of contents

Popular GPS manuals by other brands

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Operating instruction

Garmin

Garmin SOUNDER 125 Owner's manual & reference

Garmin

Garmin DEZL 580 owner's manual

Jigabot

Jigabot EX quick start guide

Pointer

Pointer Cellocator CelloTrack XT LTE overview

Queclink

Queclink GV55LITE user manual

Voxson

Voxson Voxtrack GPS500 Quick user guide

Garmin

Garmin ECHOMAP PLUS owner's manual

Starcom Systems

Starcom Systems Kylos Compact user guide

Garmin

Garmin 15 H Series Technical specifications

Cobra

Cobra Marine MC 600Ci owner's manual

Cellocator

Cellocator CelloTrack T installation guide

Enfora

Enfora Mini-MT GSM2228UG001 user guide

Magellan

Magellan eXplorist 100 Reference manual

LTE

LTE G50B user manual

Garmin

Garmin DEZL OTR500 owner's manual

SkyGolf

SkyGolf SkyCaddie SG1 user guide