Sime MINI 16 BF ErP User manual

DOMESTIC INSTANTANEOUS GAS WATER HEATER

USER’S MANUAL

MINI 12 BF ErP – 16 BF ErP

Read the technical instruction before installing the appliance

Read the user’s instruction before lighting the appliance

Cod. 6328403 – 01/2023 – R8

ISO9001 Certified

Thank you for purchasing our gas water heater.

Read this Manual before installing and operating and keep for future reference.

Contents

•

Special Advice

..............................................................................................................

•

Features &Benefits

.......................................................................................................

•

Specifications

.................................................................................................................

•

Parts Name

...............................................................................................................

•

Installation

.....................................................................................................................

•

Using Methods

..............................................................................................................

•

Safety Cautions

.............................................................................................................

•

Maintenance

.................................................................................................................

•

Trouble‐Shooting Guidance

..........................................................................................

•

Enclose

..........................................................................................................................

•

Packaging and Accessories

.............................................................................................

•

Electrical diagram

..........................................................................................................

•

Conversion instructions

..................................................................................................

Special Advice

Read the technical instructions before installing the appliance.

Read the user’s instructions before lighting the appliance.

The manufacturer or any danger resulted from installation and operations not bear responsibility

for any danger resulted from installation and operations not in accordance to this manual.

When the outdoors temperature is less than 0

℃

, the residual water inside the heater must be

drained after use.

Features & Benefits



Micro‐Computer Intelligent Control System

The core component of the gas water heater is micro‐computer intelligent control system, which

is one of today’s most advanced mechatronic technology. The CPU chipset can analyze

automatically and set the optimal working parameter rapidly according to different data such as

the flowing water quantity, the pressure situation and the actual inlet water temperature.



Digital Control for Automatic Constant Temperature of OutletWater

This function is to monitor the outlet water temperature by a temperature sensor and to transfer

the information to the micro‐computer, so that the micro‐computer could adjust the gas and air

supply quantity to guarantee the constant outlet water temperature according to the

temperature set by the user and the actual inlet water temperature automatically.



Low Start‐Up Water Pressure

The lowest start‐up water pressure of this product could reach 0.02MPa(the minimum water rate

is 2.5 L/min), so it could also be used in the residence area with low water pressure.



AI Artificial Intelligent Memory Function

The gas water heater could work with the temperature you set last time when you restart it, so

that you do not need to set the temperature again, which is great experience of the idea of

ergonomics.



Effective and Energy‐Saving

This product has advanced technologies called Strengthened Combustion and Forced

Combustion. These patents aim to make the best use of heat energy with high working efficiency.



Set Temperature by Touch

You could set the required temperature easily by touching the digital display. The setting

temperature is from 35

℃

to 65

℃

, which can meet different water temperature requirements

with easy operation.



Multiple Safety Protection

This product has safety protections includes self‐check protection, flame‐out protection, over‐

heat protection, accidental power‐cut protection, fan breakdown protection, over electric load

protection, electric leakage protection, over wind pressure protection, over temperature

protection, timing protection etc.

Tips

The above conclusion comes from the safety protection test under lab experimental conditions. It

may be affected by the surroundings in actual using environment. Thus, please use the product in

proper conditions rather than using itdevastatingly.

NOTE

The water used in the system must meet the manufacturer's requirements regarding pH,

conductivity, hardness, alkalinity, chloride concentration, inadequate values give rise to the

non‐provision of the guarantee, the values of the system fluid must be within those listed

below:

• The content of soluble salts will not exceed 500 mg/l.

• The conductivity must not exceed 650 μS/cm.

• The pH of the fluid, with a temperature of 20º, must be between a minimum of 6 and a

maximum of 8.

• The total hardness of the water must not exceed 30º F,

It is recommended to treat the water when the hardness of the fluid is higher than the

established limits, total hardness, salinity, high conductivity. (polyphosphates, softener, etc,)

13,

33,

53,

C83*(*only G20)

13,

33,

53,

C83*(*only G20)

Appliance category

0063CR7772

0063/2

IT‐ES‐HR‐GR‐GB‐CZ‐PT

Parts Name

Fig. 1

(The dimension information is for reference only. Please refer to the actual product.)

MINI 12 BF ErP

MINI 16 BF ErP

150

170

165

185

Fig. 2 (Unit: mm)

(The dimension information is for reference only. Please refer to the actual product.)

Installation

Contact your local gas dealers or gas management department for a qualified engineer to install

the gas water heater (users are recommended not to install by themselves). The installer should

be called on to install and adjust the appliance, where appropriate.

This product is prohibited to use this gas water heater when flue pipe has not been installed

correctly according to instructions.

■Installation Requirements

•

The flue of the gas water heater should be installed through an external wall, the heater cannot

be installed in outdoors. (Fig.3)

•

The gas water heater installed in a suitably ventiled room , in accordance with the regulations

in force.. It is not allowed to install in the bedroom, underground, bathroom or any other places

with poor ventilation. (For B

23‐53

type)

•

The flue of the heater cannot be connected to a common flue (Fig. 4).(Except for type B33)

•

Please don’t install the heater in places where special chemicals are used, such as the laundries

or factories etc., otherwise it may cause rusting, shorten the lifetime of the heater, or prevent

normal working. (Fig. 5)

•

Don’t install the heater above the gas stoves or other heat sources. (Fig. 6)

•

The gas water heater should be kept away from the combustible materials with the distance

shown in Fig. 7 at least.

•

When the installation parts' materials are combustible or flammable should be used frame‐

proof board to isolate, heat‐resistant plate and wall gap should be greater than 10mm,and the

size of heat plate should be larger than water heater shell for 10mm. (Fig. 8)

•

The electric wires and electric equipment are not allowed to be placed on the top of the gas

water heater. The horizontal distance between the gas water heater and other electric

equipment should be more than 400mm.

•

The power socket must have a reliable ground wire to improve safety. In order to reduce the

number of times of plugging, it is better to use a socket with a switch. Whenever the water

heater finishes working, please switch it off to avoid being electrified in a long term. The power

supply socket should not be installed in the moist environment.

•

The socket should be installed at the side of the product, and never be installed below the

machine or the place with splashes, near the heat source, in exposure to sun and rain, or the

place where it is not easy tocontrol.

•

The installation place of socket must be far away from the spraying space, so as to avoid

spraying the socket during shower.

■Installation Method

Installation of Gas Water Heater

Drill holes in the wall according to Fig. 9, put an expansion bolt into the upper hole and plastic

gasket into the lower hole, mount the water heater vertically on the upper bolt without

inclination and tighten the lower holes with expansion bolts.

Installation of water and gas pipes (Fig. 10)

•

It can be used when the flue system can ensure that the provided gas pressure can reach the

lowest requirement. If gas water heater reaches the rated heat input, the gas pressure must

reach the rated heat input in the technologic parameterform.

This manual suits for next models

Table of contents

Other Sime Water Heater manuals

Sime

Sime Dewy 30 HE WM User guide

Sime

Sime ECOMAXI VB 80 Owner's manual

Sime

Sime ECOMAXI VB 200 Owner's manual

Sime

Sime BS 1S User manual

Sime

Sime MURELLE HE 25 Installation instructions

Sime

Sime MURELLE EV HE 25/55 User manual

Sime

Sime MURELLE HE 25 User guide

Sime

Sime MINI 12 BF ErP User manual

Sime

Sime LAGO EV Manual

Sime

Sime MURELLE HE 25 User manual

Sime

Sime NATURAL S Series User guide

Sime

Sime MINI 12 OF Erp User manual

Sime

Sime MURELLE HE 25 User guide

Popular Water Heater manuals by other brands

Kenmore

Kenmore 153.582400 Use & care guide

Applimo

Applimo Edel AIR Installation and operating instructions

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Operating and installation instructions

clage

clage E-Mini Series Operating and installation instructions

Toyotomi

Toyotomi Oil Miser OM-180 installation manual

Bradford White

Bradford White EF Series Service manual

Eccotemp

Eccotemp 40-H Use & care manual

Dimplex

Dimplex ECSd125-580 Installation and user instructions

Dux

Dux 32FCR6N installation manual

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Operation and maintenance instructions

Noritz

Noritz N-132M Owner's guide and installation manual

TESY

TESY GCV7/4S 10047 Instructions for use and maintenance

A.O. Smith

A.O. Smith Gphe 50 instruction manual

Koryo

Koryo KWHZF15Y user manual

Pentair

Pentair PSC-14-4-02 Installation and operation manual

GE 40M06AAG Energy guide

Thermor

Thermor AEROMAX SPLIT 2 Instructions for use

American Hometec

American Hometec AHQ-B03X Installation and operation manual