SilverStone SST-PS06B User manual
PS06
Installation and system optimization guide:
The following manual and guides were carefully prepared by the SilverStone engineering team to help
you maximize the potential of your SilverStone product. Please keep this manual for future reference
when upgrading or performing maintenance on your system. A copy of this manual can also be
downloaded from our website at:
http://www.silverstonetek.com
Specifications
Disassemble Chart
Side panel installation
Power supply installation
Optical drive installation
3..5” / 2.5” hot-swappable HDD installation
Hard drive installation
Motherboard installation
Expansion card installation
Side panel installation
Fan filter removal steps
P.2
P.4
P.5
P.6
P.8
P.10
P.11
P.13
P.14
P.16
P.17
PS06
Precision crafted enclosure with class-leading
performance and features
PS06
To push the thermal performance envelop of the Precision series to a new level,
SilverStone engineers implemented the award-winning 180mm Air Penetrator fan
(AP181) into the PS06 tower chassis. With the AP181 and an included silent 120mm
fan, the PS06 is capable of top-level cooling performance usually reserved for chassis
with twice the cost. Two additional 120mm fan slots lets users further improve cooling
performance if necessary. To help keep the dust out while providing great performance,
all intake fan slots are also equipped with easily removable fan filters to work effectively
with the default positive pressure airflow scheme. Ergonomic features from previous
Precision series have also been retained with tool-less mechanisms for all drive bays
along with a newly added external accessible 3.5”/2.5” combo hot-swappable bay on
the front panel for convenient hard drive storage. Rounding up this superb package
are all black interior, cable routing holes, anti-vibration hard drive brackets, dual USB
3.0 ports, and a daring new high-tech exterior styling. For enthusiasts looking for the
most advanced mid-tower chassis available at a great price, the Precision PS06 is a
great choice.
Precision crafted enclosure with class-leading
performance and features
Special Features
Positive air pressure design optimizes cooling performance
Quick removal dust filters
Mid-size tower chassis for all around integration
Great cooling performance with top mounted 180mm Air Penetrator fan
Convenient tool-less installation for nearly all components
All black painted interior
Hot-swappable hard drive bay for maximum flexibility
2
Specifications
Model No.
Material
Motherboard
Drive Bay
Cooling System
Expansion Slot
Front I/O Port
Power Supply
Expansion Card
Net Weight
Dimension
SST-PS06B (Black), SST-PS06B-W (Black+ window)
Plastic & mesh front panel, 0.7mm steel body
CEB, ATX up to 10.6”, Micro ATX
External
Internal
Front
Rear
Top
Bottom
8
USB 3.0 x 2, Audio x 1, MIC x 1
1 x Optional standard PS2 (ATX)
Compatible with expansion card up to 12.2”
9.05 kg
210mm(W) x 525mm(H) x 520mm(D)
5.25" x 5, 3.5” / 2.5” Hot swap bay
3.5" x 4
1 x 120mm intake fan
1 x 120mm fan slot
180mm Air Penetrator 700 / 1200rpm, 18 / 34dBA
1 x 120mm fan slot
PS06
Precision crafted enclosure with class-leading
performance and features
3
SCREW A
PICTURE ITEM
PACKAGE CONTENT USB3.0 CONNETOR
HD AUDIO CONNETOR
PURPOSE
SECURE POWER SUPPLY
AND MOTHERBOARD
SECURE 5.25” DRIVE
AND FLOPPY
USB 3.0 TO USB 2.0
COVERTOR CABLE
MOTHERBOARD STANDOFF
SCREW B
SCREW C
MANUAL
USB CABLE
SIDE PANEL WINDOW
18032 FAN x 1
12025 FAN x 1 (OPTION)
EXPANSION SLOTS
x 8 (OPTION)
PS2 PSU (OPTION)
3.5” HDD TRAY
3.5” DRIVE BAY x 4
5.25” DRIVE BAY x 5
RIGHT SIDE PANEL
TOP I/O USB x 2 + SPK + MIC
12025 FAN x 1
POWER BUTTON
3.5” OR 2.5” HOTSWAP BAY x 1
RESET BUTTON
12025 FAN x 1 (OPTION)
4
Unscrew screws from the
side panel.
Remove side panels
from the case.
Снимите боковые панели с
корпуса.
Entfernen Sie die seitlichen
Blenden vom Gehäuse.
取下側板。
Retirez les panneaux latéraux
du boîtier.
取下侧板。
Quite los paneles laterales de
la carcasa.
側面パネルをケースから取り
外します。
Asportare il pannello laterale
dal case.
사이드패널을 케이스에서 제거
합니다.
Dévissez les vis du panneau
latéral.
先松开左右侧板锁固螺丝。
Quite los tornillos del panel
lateral.
側面パネルからネジをはず
します。
Rimuovere le viti dal pannello
laterale.
사이드패널에서 나사를
풀어 줍니다.
Отвинтите винты на боковых
панелях.
Lösen Sie die Schrauben von
der seitlichen Blende.
先鬆開左右側板鎖固螺絲。
Side panel installation:
5
Unscrew screws from the
PSU holder.
Install PSU into the case
as shown.
Установите блок питания вкорпус,
как показано на рисунке.
Installieren Sie das Netzteil
wie dargestellt im Gehäuse.
再放入電源。
Installez l'alimentation dans
le boîtier comme montré.
再放入电源。
Instale la FA en la carcasa
como se muestra.
図のように、ケース内にPSUを
インストールします。
Installare l’alimentatore nel
case come mostrato.
PSU를 그림과 같이 케이스에
장착합니다.
Dévissez les vis su support de
l'alimentation.
先松开底部锁固电源支撑架的
两颗螺丝。
Quite los tornillos del soporte
de la FA.
PSUホルダーからネジをはず
します。
Rimuovere le viti dal supporto
dell’alimentatore.
PSU 홀더의 나사를 풀어줍니다.
Отвинтите винты на держателе
блока питания.
Lösen Sie die Schrauben
von der Netzteilhalterung.
先鬆開底部鎖固電源支撐架的
兩顆螺絲。
Power supply installation:
1.
2.
6
Adjust the PSU holder to fit the PSU.
Secure power supply and PSU holder with screws.
Ajustez le support pour bien fixer l'alimentation.
Fixez l'alimentation et son support avec des vis.
根据电源长短，调整支撑架位置。
将支撑架及电源锁固。
Ajuste el soporte de la FA para que se ajuste a la FA.
Fije la fuente de alimentación y el soporte de la FA con tornillos.
PSUに合わせて、PSUホルダーを調整します。
電源およびPSUホルダーをネジで固定します。
Ajuste el soporte de la FA para que se ajuste a la FA.
Fije la fuente de alimentación y el soporte de la FA con tornillos.
PUS 홀더를 조정해 PSU를맞추어 넣습니다.
파워서플라이와 PSU 홀더를 나사로 고정시킵니다.
Отрегулируйте держатель блока питания по размеру
блока питания.
Закрепите блок питания идержатель блока питания
спомощью винтов.
Richten Sie die Netzteilhalterung so aus, dass das
Netzteil hineinpasst.
Befestigen Sie Netzteil und Netzteilhalterung mit
Schrauben.
根據電源長短，調整支撐架位置。
將支撐架及電源鎖固。
Power supply installation:
3.
7
Remove the front panel
as shown.
Remove the 5.25” drive bay
covers as shown.
Снимите заглушки отсеков 5,25
дюйма, как показано на рисунке.
Entfernen Sie die 5,25 Zoll-
Laufwerkschachtabdeckungen
wie dargestellt.
再移除5.25寸擋片。
Retirez les caches des baies
5.25” comme montré.
再移除5.25寸挡片。
Retire las tapas para dispositivos
de 5,25” como se muestra.
図示されるように、5.25インチ
のドライブベイカバーを取り外
します。
Rimuovere i cover da 5.25” come
mostrato in figura.
5.25” 드라이브베이 커버를
그림과 같이 제거합니다.
Retirez le panneau frontal
comme montré.
先取下前塑料面板。
Retire el panel frontal como
se muestra.
図示されるように、フロントパ
ネルを取り外します。
Rimuovere il pannello frontale
come mostrato in figura.
전편패널을 그림과 같이
제거합니다.
Снимите переднюю панель,
как показано на рисунке.
Nehmen Sie die Frontblende
wie gezeigt ab.
先取下前塑膠面板。
Optical drive installation:
1.
2.
8
Reinstall the front panel.
Push the optical drive or 5.25”
device into the 5.25” drive bay
in all the way and PS06’s tool-less
mechanism will lock it automatically.
Вставьте привод оптических дисков
или другое устройство формата 5,25
дюйма вотсек 5,25 дюйма до упора
так, чтобы устройство автоматически
зафиксировалось механизмом корпуса
PS06, не требующим применения
инструментов.
Schieben Sie das optische
Laufwerke oder 5,25 Zoll-
Laufwerk bis zum Anschlag ein;
es wird automatisch verriegelt.
將光碟機由前方裝入機箱，
免工具機構會自動將其固定。
Poussez l'appareil 5,25” dans la
baie 5,25” et fixez-le en poussant
le mécanisme sans outils dans la
direction montrée pour le fixer.
将光驱由前方装入机箱，
免工具机构会自动将其固定。
Empuje el dispositivo óptico ó
dispositivo de 5,25” dentro de la
bahía para dispositivos de 5,25”
hasta el fondo y el mecanismo
sin herramientas de la PS06 lo
enganchará de forma automática
5,25インチデバイスを5,25イン
チドライブベイに入れ、工具不
要機構を押して固定します。
Spingere il drive ottico o la periferica
da 5,25” nel bay fino a quando il
sistema di bloccaggio tool-less di
PS06 non bloccherà automaticamente
il dispositivo.
넣으면 PS06의Tool-Less 메카니즘에
의해 자동으로 고정됩니다.
광드라이브 혹은 5.25” 장치를 5.25”
드라이브 베이로 끝까지 밀어.
Réinstallez le panneau frontal. 然后将面板装回机壳。
Reinstale el panel frontal. フロントパネルを戻します。
Reinstallare il pannello frontale. 전면패널을 재 설치합니다.
Установите на место
переднюю панель.
Bringen Sie die vordere
Blende wieder an.
然後將面板裝回機殼。
Optical drive installation:
3.
4.
9
This manual suits for next models
1
Table of contents
Other SilverStone Enclosure manuals
SilverStone
SilverStone ts02b User manual
SilverStone
SilverStone ML05 User manual
SilverStone
SilverStone milo series mj03 User manual
SilverStone
SilverStone RAVEN Z User manual
SilverStone
SilverStone SETA A1 User manual
SilverStone
SilverStone CS01 User manual
SilverStone
SilverStone DS351 User manual
SilverStone
SilverStone FARA B1 User manual
SilverStone
SilverStone sugo sg13 User manual
SilverStone
SilverStone TJ04-E User manual
SilverStone
SilverStone Lucid Series User manual
SilverStone
SilverStone ML09 User manual
SilverStone
SilverStone MMS01 User manual
SilverStone
SilverStone DS222 User manual
SilverStone
SilverStone SST-SG02-f User manual
SilverStone
SilverStone SG11 User manual
SilverStone
SilverStone Raven SST-RVZ01B User manual
SilverStone
SilverStone PM01 User manual
SilverStone
SilverStone REDLINE Series User manual
SilverStone
SilverStone RAVEN RVS02 User manual
