SilverStar LT-VIII User manual

LT - VIII

LASER MOTORHEAD LIGHT

USER MANUAL

Please read over this manual before operation the light

Open box to check

Installation

This product use new hi

h temperature-resistance pro

ect plastic to

make. It has a beautiful surface to show the characteristic of new sta

hts. You could choose the color

ou like. It is made accord CE

standard. It accord with the international DMX512 a

reement. Sin

le or

several can be used at same time. It could be used in different place.

The product use semiconductor laser movin

mirror scan to make man

kinds of

obos and the size of

obos ad

ustable. Li

ht touch control

switch and code displa

make operation easier. When

ou receive the

product, take it gently check if there is problem which cause in

transportation. At the same time please pa

attention to see if there are

some parts enclosed:

1 Power line

1 Fuse line

1 User manual

Please confirm whether the volta

ou have is same as si

ned on the

light before install.

Installed by technician. It muse be placed safety and best light angle.

Must keep space between li

ht equipments and combustibles more than

half a meter. Keep space between li

ht equipments and wall more than

0.15 meter.

The fans and vent-pipes should not be

ammed b

other equipment and

decorate materials.

There have a fuse line connection hole at the bottom of li

ht. Please use

a fuse line that could stand 10 double of li

ht's wei

ht to drill throu

fuse line connection hole to help install in safety view.

The light must be fixture installed.

In safety view please put ground wire into the ground.

Laser Motorhead Li

ht .1.

Attention

Instruction & Function

Please do not open the bottom cover yourself without permission.

Operate it accord the user manual. Please call the technician in case the

machine broken down.

Do not use it under the damp and rain.

Pay attention to prevent the light from strong bump.

Prevent the dust into the product

Keep the vent-pipe well while working.

Keep the plug insert well before put into power.

Don't look the light directly to prevent make some destroy with

eyes.Don't light or extinguish frequently, otherwise the life span of the

light tube will be shortened.

In view of the special characters, after operated the light an hour the

product shall be paused about 15 minutes before be used next time.

Don't touch the product and draw the power line if you hand wet.

Keep the space between light equipments and the lighted things more

than one meter.

Don't open the cover for there have no parts the user can repair.

Don't operate the light without lamps.

If the semiconductor laser doesn't as light as before or there have some

destroy with lens or other parts, please contact the distributor in time.

When you want to retransfer the products, you'd better use the original

package to shockproof.

The product use international standard DMX512 signal to control.

Through use light touch switch and code show screen you can easy to

set DMX channel and function operate.

: security on/off key switch

After turn on, code show screen will show the DMX channel (once you

set the DMX channel and store them it will show you latest setting

value).

ON/OFF SECURITY KEY SWITCH

Laser Motorhead Light .2.

DMX channel setting way:

1. Press up or down key to change the channel address of show.

2. Press enter key to confirm the change. The green light will shine to

indicate the light already store the channel address.

3. The product will show the latest setting value when you operate next

time.

The product can operate by single mode without controller.

Press fung key continuous, the code screen will show the function operate

code of products in proper order. Every function operate code

corresponding special function as following:

After the code screen show the function operate code, if you press up

or down the code screen will show N (NO) or Y (YES).

You can press enter to confirm when the function operate code screen

show Y . At the same time the green light will shine and the product

will make this function setting effect and store. When the function

operate code screen show N , you also can press enter to make this

function setting out of effect and store.

Set light at sound active station. The light auto-black out without sound

active music input.

The product has 8 operate channel and use international standard

DMX512. The details as following:

Single Machine Mode

Controller Operate Mode

Laser Motorhead Light .3.

Function Code Parallelism Function

001 DMX control

002 Sound control

003 Auto-procedure

004 Subordinate operate

005 Address code set

007 Reset, on or off

008 00B

…

Keep

Sound active auto speed (set)

Connect the XLR-XLR control line from the DMX output of

controller to DMX input of each product and connect the DMX output

of the first one to the DMX input of the second one. Connect all

products in this wa

. Then use the attached circle plu

to connect the

signal output of last machine like picture show:

ote: Please remember the si

nal output of last machine must connect

the attached circle plu

. The circle plu

connect a 120 resistance

between 2 feet and 3 feet canon plug. The signal reflects phenomena

can be avoided by using circle plug during DMX 512 signal transfer.

The product use 3 feet XLR plu

. If the controller

ou use is 5 feet

XLR plu

ou must use a interchan

e line from 5 feet to 3 feet as

following picture:

picture size

reset

picture roll

Y line

picture

X line

Channel

0-255

bigger or smaller from the center

(0-biggest, 255-smallest)

0-127 open light, 128-254 black out,

255 reset.

roll around the center (0-360 )

roll Y line like mirror image

compress fold

roll X line like mirror image

compress fold

0-265 (vertical)

12 pictures, average DMX value

(Can change accord user require)

0-370 (horizontal)

function

DMXIN DMXOUT POWER IN

FUSE F6.3A DMXIN DMXOUT POWER IN

FUSE F6.3ADMXIN DMXOUT POWER IN

FUSE F6.3A

Light 1

Control singal input

Output and input connect together Output and input connect together

Lignt NLight 2

Laser Motorhead Light .4.

When it controlled by DMX512, you must installADDR on the light. One

lighthas8channels.PleaseInstall itasfollows:

Calculateaddressnumber: calculateformula: ADDR=8 N-8

Example: No.1 light ADDR=0; No.2 light ADDR=8;

No.3 light ADDR=16; No.4 light ADDR=24;

Don't connect an

lines to DMX input entrance. DMX channel can be

set freely. The products will be used as a principal one.

Set begin channel of other lights to be 004 and used as subordinate

machine.

Connect the XLR-XLR control line from the DMX output of principal

machine to DMX input of each subordinate product and connect the

DMX output of the first one to the DMX input of the second one.

Connect all products in this wa

. Then use the attached circle plu

connect the signal output of last machine.

Under the principal/subordinate in same step control mode

ou can use

uilt-in auto procedure of principal machine or use built-in MIC sound to

control. Subordinate machines can work with principal one in same step.

Principal/subordinate same step control mode

Laser Motorhead Light .5.

5Pins canon( )plug

Pin 1: GND(SCREEN)

Pin 2: Signal(-)

Pin 3: Signal(+)

Pin 4: N/C

Pin 5: N/C

Pin 1: GND(SCREEN)

Pin 2: Signal(-)

Pin 3: Signal(+)

Pins canon(socket)

5Pins canon(socket)

Pin 1: GND(SCREEN)

Pin 2: Signal(-)

Pin 3: Signal(+)

Pin 4: N/C

Pin 5: N/C

3plug

Pin 1: GND(SCREEN)

Pin 2: Signal(-)

Pin 3: Signal(+)

Pins canon( )

The transform of the controller line of 3 pins and 5 pins (plug and socket)

Pin 1: Screen

Pin 2: Signal -

Pin 3: Signal +

3 pins canon connect to the input of DMX512 connection

Laser Motorhead Light .6.

Usage of our DMX512-KT console

Our company recommend use our DMX512-KT console to control our

Scanning Computer Light. select 17 MARTIN 518.

Set the address code as following chart:

Projector No. & chanees. 1 2 4 8 16 32 64 128 256 512

Projector 4 - chanees.42-55

Projector 5 - chanees.56-69

Projector 6 - chanees.70-83

Projector 7 - chanees.84-97

Projector 8 - chanees.98-111

Projector 9 - chanees.112-125

OFF

Projector 10 - chanees.126-139

Projector 11 - chanees.140-153

Projector 12 - chanees.154-167

OFF

Projector 3 - chanees.28-41OFF OFF ON ON ON OFF OFF OFF OFF OFF

Projector 1 - chanees.0-13

Projector 2 - chanees.14-27

OFF

Specification

Voltage: AC220V~240V, 50/60Hz

Rated power: 60W

Laser: semiconductor laser, output 60mW

Laser wavelength: 532nm

Insulation resistance:>2M

Channel: 8 channels

Signal: DMX512

Control mode: controller, single machine mode, principal /subordinate

work at same step.

Design: many kinds of effects through moving mirror.

Strobe: 0-6 times/SEC, adjustable

Scan: horizontal: 370 , vertical: 265

Size: 370 275 375mm

Net weight: 9.5kg

××

O O

Laser Motorhead Light .7.

Maintain

Announcement

The optical lens and illuminators must clean regular to protect a better

effect. You can clean them accord the light's operate times and the

using situation. Use soft cloth and original glass cleaner to clean. You'd

etter clean exterior optical system every 20 days and inside optical

system every 60 days at least.

Do not use organic solvent such as alcohol to clean the cover of light.

When we delivery the goods out of factory, it's function is good and

package is well. All users must obey all noted attentions and operate

rules. We won't serve free of charge repair if the destroy be caused by

your own wrong operate. All the problems which be caused by not

operate accord the user manual also not the duty of distributor.

We won't inform again if there have any more changes of user manual.

Table of contents

Other SilverStar Lighting Equipment manuals

SilverStar

SilverStar WASH 250 Series User manual

SilverStar

SilverStar YX-2007 User manual

SilverStar

SilverStar ECLIPSE MINI COLOR SS867 User manual

SilverStar

SilverStar SS847 User manual

SilverStar

SilverStar FREZNO 250 HEX User manual

SilverStar

SilverStar INDIGO 4000XS User manual

SilverStar

SilverStar SS9151SC User manual

SilverStar

SilverStar MX-COLOR User manual

SilverStar

SilverStar Show Wash 120 User manual

SilverStar

SilverStar ECLIPSE 1000 RGBAL HC SS5152 User manual

SilverStar

SilverStar MAXCYC SS809 User manual

SilverStar

SilverStar CAM3/ETZ User manual

SilverStar

SilverStar LT-215 User manual

SilverStar

SilverStar NEPTUNE 700 PROFILE User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions