■ 6 │ GB│IE│NI SKV 1200 B2
3) To use the lid 9, place it on the part of the
housing which surrounds the attachment tool
socket 7in such a way that the filling opening
is facing you. On the attachment tool socket 7
there is a locking device for the lid 9:
ATTENTION! PROPERTY DAMAGE!
► Never apply any pressure to the lid 9when
attaching and removing it in order to ensure
that it is not damaged.
4) Depending on what you want to do, fit the
kneading hook 0, whisk qor beater winto
the attachment tool socket 7:
–Insert the kneading hook 0, whisk qor
beater w into the socket 7so that the two
metal pins on the axle of the attachment 0
qwlock into the recesses of the attach-
ment tool socket 7.
–Press the attachment 0qwas far as it
will go into the socket 7and then turn it
anticlockwise as far as it will go (in the
direction of the arrow ).
–Let go of the attachment 0qw. This is now
firmly held in the attachment tool socket 7.
5) Add the ingredients into the mixing bowl 6,
observing the following table with the recom-
mended filling quantities:
Filling quantities for... min. max.
Yeast dough N/A 1000g
flour
Cake mixture N/A
900g
plain
flour
Heavy dough
(e.g. shortcrust pastry) N/A
900g
plain
flour
Cream 200 ml 1500 ml
Egg white
(eggs of weight class M) 2 12
Adjust the remaining ingredients in the recipe
to the respective maximum quantity.
CAUTION! PROPERTY DAMAGE!
► To prevent the appliance from being
overloaded, do not exceed the specified
maximum filling quantities.
If the appliance is labouring: switch off the
appliance, remove half of the dough and
knead each half separately.
NOTE
► Please note that during the kneading or stirring
process, the dough in the mixing bowl 6
increases in volume or is pressed upward
slightly as a result of the movement. You
should therefore never fill the mixing bowl 6
right up to the top!
Warning! Danger of crushing! Make sure
that no parts of the body are located
under the swivel arm 1when you push it
downwards.
6) Press down the release lever 2and press the
swivel arm 1with the attachment mounted
downwards into the working position until the
swivel arm 1locks in place.
