Silver Creation BulletHD User manual

Welcome

Thanks for purchasing BulletHD-ADVENTURE Wearable Sports Camcorder.

The world’s first wearable camcorder with 12.0 Mega Pixels camera! With our

customized mounts in box are ideally suited for mounting to yoke in motorbike,

airplanes, golf carts, vehicle, bicycles and many other round and square rail

applications, or any flat surface you can imagine! Aluminum Armored Body -

Even any tough situation and severe weather can’t stop your recording! It’s

also shock, vibration and water resistant.

What’s in the box?

●Camcorder ●Double Socket Arm

●Zinc U-Bolt Mount ●Battery

●Rotating Flat Surface Mount ●Hand Safety Strap

●Adhesive Mount ×2 ●Charger

●Mount Adapter ●USBCable

●Arm ●User Manual

CAMERA OVERVIEW

INITIAL SET UP

1. Make sure the camera is OFF before adding or removing the memory card!

2. Screw out the rear cap (open) located at the back of the camera .

3. Install a Micro SD memory card (max up to 32GB) into the rear slot. To insert the micro SD card,

slide the micro SD card into the card slot on the back of the camera with the card label facing

down. The SD card will click into place once it is inserted past flush with the camera. Use your

fingernail to do this. Then screw in the rear cap till is complete lock.

4. If “no” SD Memory card is inserted into the camera, a Red/Green LED light on top of the c amera

will blink.

5. The Micro SD memory cards must be clean (no images from other sources). If you are using the

Micro SD memory card from other cameras, please make sure to format the SD memory card in your

computer prior to use in the camera. Newcardsaregoodtousestraightfromthepackage.

Charging the battery:

Screw out the rear cap located at the rear of the camera ③ and Plug the USB charger to the

camera. The blue light is on while charging, goes off when the battery is fully charged. On the first

use charge the battery 10 hours before use! You can record up to 125 minutes with one charge.

Power on/off your BulletHD -ADVENTURE

Press and hold the POWER/Shutter button for 2 seconds for power on, the green led will turn on and

the red led will flashes twice, then comes to standby mode.

Take a Video

Turn on the camera and press the Power/Shutter button quick to start video recording. The red led

will blink and you can hear a sound.

Press the same button to stop recording.

To confirm the camera is in video mode, Screw out the rear cap , and the video/photo switch “”

must be to right for video recording standby mode.

Take Snapshot Photos

Screw out the rear cap , switch “” to left for photo standby mode, close the cap.

Turn on camera by pressing POWER/Shooter button for 2 seconds. The green led will be on and the

red led will flash 2 times, then comes to standby mode. Press the shutter button to start taking

photos (red led will blink). Press the shooter button “” again to stop. In this mode the camera will

take sequential photos every 3 seconds until the battery die or the Micro SD card is full.

Remember to place an optional MicroSD card before your recordings!

BulletHD –ADVENTURE is NOT available for Water Sports.

Date & Time Setting

Install the CD driver to your computer! Make sure the MicroSD card is in the Bullet HD, then connect

to PC. Blue light will turn on, then switch on the camera.

Back to your PC screen, there should be a window to show the BulletHD -ADVENTURE is

connected with your PC. Now open the “Date & Time setting Tool” file, double click on “time”. That’s

now synced with your PC! Now you can take a photo or video to test it!

Playback on you computer

Power off the BulletHD -ADVENTURE! Screw the rear cap , connect with your computer via USB

cable from the USB port ,then turn on the device! The driver would be automatically installed.

Or you can take out the MicroSD card and use your own card reader to connect with your computer

too.

The device must be power on while connecting with computer for data

download. Don’t remove the battery!

Watching video at the same time may cause unexpected consequence!

REMARKS: THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

Product size: 90 x 30 x 30 mm

Weight: 83g

Operating System:

Compatibility: Win ME, 2000, XP, Vista; Mac OS X 10.6+

Technical specifications for BulletHD -ADVENTURE:

Model : Bullet HD -ADVENTURE

Optics:

•170 degree -FISHEYE view at 720p resolutions

•f/2.8, fixed focus glass lens

Video:

•HD Resolution Settings: 720p: 1280x 720, 30fps

•Sensor Type: 1 / 2.5” HD CMOS

•Light Sensitivity: 1.4 V/lux-sec (550nm)

•Video Format: MPEG codec, .AVI file format

•Exposure Control : Auto / center weighted / spot

•White Balance: Auto

Audio:

•Mono, 48 kHz, AAC compression, built-in microphone

Photo:

•Resolution: 4032 x 3024

•Camera: 12.0 Mega Pixels

•Format: JPEG

•Capture mode: Auto snapshot every 3 seconds

Storage:

• Memory: Micro SD card, support Max upto 32GB capacity

(recommendedClass4orabove)

• Avg. Record Time: 10~15min/GB

Mounts & Accessories Description

Zinc U-Bolt Mount

Zinc U-Bolt Mount in box is ideally suited for several versions of

handlebar kits. BulletHD can be quickly and securely mounted.

Designed for rugged outdoor use, ideal accessory for mountain bike,

motorbike, golf carts, and many other round rail applications.

Rotating Flat Surface Mount

Rotating Flat Surface Mount holds BulletHD securely. Solutions provided

for motorcycles, aeroplanes, or any flat surface you can think of. Holds

BulletHD steady all day long, yet you can easily remove the unit for safe

keeping at the end of the day.

Adhesive Mount

Adhesive Mount for Rotating Flat Surface Mount.

Adaptor

The adaptor connects directly to the arm and contains a female 1/4"-20

threaded steel stud that will connect to any standard male thread. Holds

the BulletHD in place even on fast, bumpy trails. Fits on and does not

slip, slide or move.

Arm

This arm contains a male 1/4"-20 threaded steel stud which matches

with the above adaptor. The metal ball allows you to shoot at any

angle, the round base with rubber surface provides support and stability

for your recording too!

Double Socket Arm

Double socket arm allows for almost infinite adjustment and perfect

viewing angles. This will help to protect BulletHD by dampening shock

and vibration. Allows for almost infinite adjustment and perfect viewing

angles.

More options…

360 Mount for Handlebar / Vented Helmet

Fit with any standard 29mm handle bar with a 360 degree rotation! You

can record at any angle with your Bullet HD Wearable Sports Camcorder.

Besides, there is adjustable silicon strap fix with any kind of vented

helmets. With your Bullet HD, allow you to shoot any anger you want to!

Strap Mount for Non-vented Helmet / Goggle

Together with adjustable silicon straps to fix with any kind of non-vented

helmets. You can use this mount with your goggle too! Slide your goggle

strap into the customized mount, Goggle Strap with width below 40mm is

compatible!

Universal Mount

It has a “female” ¼"-20 screw on the bottom to fix with any mounts or

tripods that have their own “male” ¼”-20 screw. Compatible with the

adjustable silicon straps or magic tape.

Camcorder Mount Adapter

This mount holds the BulletHD in place and with a 360 degree rotation.

This mount is compatible with the strap mount and universal mount.

Adjustable Silicon Straps

Comes with 2 pieces of flexible & strong adjustable silicon straps.

Compatible with both strap mount & universal mount, allow you to fix and

quick release in anywhere you can think of. You can join 2 silicon

straps together to mount to any helmet.

Magic Tape

Use with both strap mount & universal mount. Allows you to fix with your own

chest harness or your arms to get a lower view of actions below eyes sign

level. Make it easy to capture videos and photos even more to any surface.

You can DIY in your own way and cut off the extra length if you want to!

Travel Case

This durable case with belt loop & Carabineer let you never forget where to

put with your gear bag. Pack your BulletHD, MicroSD cards, USB cable,

an extra battery, and mounts with you where ever you go or leave at home,

in order not to lose them.

Windshield Mount

With strong and powerful suction pad allows your Bullet HD Wearable

Camcorder to stick with any windshield. Based by a multi position metal

ball, you can shoot at any anger at 720 degree. You can attach to any flat

surface of car body too! Make sure it’s fixed well, you are ready to go!

Flat Surface Mount

With a magic mat allows your Bullet HD Wearable Camcorder to stick with

any flat surface or glass surface. Based by a multi position metal ball, you

can shoot at any anger at 720 degree. Make sure it’s fixed well, you are

ready to go!

Car Charger

Keep recording while charge your camcorder in car!

Warranty:

Your BulletHD -ADVENTURE Wearable Sports Camcorder is covered by a 365 days Limited Warranty

on parts and labor from the date of original purchase, and purchases must be made through an

authorized dealer. The warranty covers defects in workmanship and materials. The warranty does not

apply to units, which have been damaged or abused intentionally or unintentionally. Purchase from

individuals or unauthorized internet sites voids the warranty. The warranty does not apply to units where

the rear cap was incorrect closed.

Tampering with or altering the unit will void the warranty. Any unauthorized service will void the warranty.

Original sales receipt must be produced for any warranty service and a return authorization must be

obtained from our customer service points.

WARNING:

The form and functions of BULLETHD, accessories, logos, and all graphics are the patented, protected

property of Silver Creation International Ltd. Any attempt by anyone other than our authorized dealers to

copy or reproduce any of the above without permission of SCi will be met with legal action. SCi products

are available for purchase only from authorized dealers.

This manual suits for next models

Table of contents

Other Silver Creation Camcorder manuals

Silver Creation

Silver Creation BulletHD - LITE User manual

Popular Camcorder manuals by other brands

Toshiba

Toshiba CAMILEO Z100 user guide

Panasonic

Panasonic NV-VS40B operating instructions

Canon

Canon RC 260 instructions

Sony

Sony Handycam DCR-DVD7E operating guide

Brinno

Brinno TimeLapse TLC200 user manual

JVC

JVC GR-SXM68AC Schematic diagram

Panasonic

Panasonic AG-HMC152EN operating instructions

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p user guide

MYDLINK

MYDLINK DCS-6100LH Quick installation guide

Sony

Sony video Hi8 Handycam CCD-TR555 operating instructions

SECURECOM

SECURECOM V-5014B installation guide

Panasonic

Panasonic HDC-SD100 operating instructions

Sharper Image

Sharper Image U-VIDEO instruction manual

JVC

JVC AA-V15EG instruction manual

Canon

Canon LEGRIA HV40 instruction manual

Sony

Sony Handycam DCR-VX2000 Service manual

RCA

RCA CC616 user guide

Panasonic

Panasonic NVM40 Service manual