Silent Sentinel Jaeger User manual
JAEGER INSTALLATION GUIDE
Commercial in Confidence 2/26
Silent Sentinel Limited reserves all the right. All in this manual including texts, pictures, diagrams, and
other contents belong to Silent Sentinel Limited. Without the written permission, no one shall copy,
photocopy, translate or disseminate all or part of this manual.
This manual is used as a guide. The photos, graphics, diagrams, and illustrations provided in the
manual are only used for explanation, which may be different from the specific product. Please refer
to the actual product. We try our best to make sure all the contents in this manual are accurate. We
do not provide any representations or warranties in this manual.
If you need the latest version of this manual, please contact us. Silent Sentinel recommends that you
use this manual under the guidance of professionals.
Version Control
Version
Author
Approver
Date
0.1
Matthew Short
Matthew Short
21/07/2021
1.0
Matthew Short
Matthew Short
06/08/2021
JAEGER INSTALLATION GUIDE
Commercial in Confidence 3/26
Contents
System Overview ...............................................................................................................................................5
Overivew ........................................................................................................................................................5
Power / Interface Requirements ...................................................................................................................5
System Orientation........................................................................................................................................5
Mechanical Installation......................................................................................................................................6
Overview ........................................................................................................................................................7
Fixtures and Fittings;......................................................................................................................................7
Mouting the Jaeger PTU ................................................................................................................................8
Attaching the Top Mount...............................................................................................................................9
Attaching the Side Payloads ........................................................................................................................10
Wiper Assembly Installation ............................................................................................................................12
Overview......................................................................................................................................................12
Fixtures and Fittings.....................................................................................................................................12
Cable Information ............................................................................................................................................15
Cable Overview ............................................................................................................................................18
Cable Pin Out ...............................................................................................................................................18
Physical Connectors.........................................................................................................................................19
Jaeger Base Connector.................................................................................................................................19
Side Payload Mounting Connector. .............................................................................................................20
Top Payload Mounting Connector...............................................................................................................21
JAEGER INSTALLATION GUIDE
Commercial in Confidence 4/26
INSTALLATION SHOULD BE CARRIED OUT BY QUALIFIED PERSONNEL ONLY IN ACCORDANCE WITH THE
APPLICABLE LOCAL CODES.
THE MANUFACTURER CAN ACCEPT NO LIABILITY FOR ANY DAMAGES OR LOSSES CAUSED DUE TO
INCORRECT OR IMPROPER INSTALLATION.
Safety Information
Before installing the equipment, please read this guide carefully.
Installation of this product should only be carried out by a competent and suitably qualified
engineer. If you are in doubt, you should refer the installation to a suitably qualified person.
To prevent electrical shock hazards, disconnect the power from electrical sources before working
on the equipment.
Make all connections with the power turned off. Do not make or remove connections when the
power is turned on. Before using the product ensure that all cables are correctly connected and
that the power cables are not damaged.
Ensure that the product is secured correctly in all situations. Do not place the equipment on to a
trolley, table desk or other platform that is not stable; to avoid the product from falling over.
Ensure that the power supply to be used is correct for the equipment and the correct input voltage
for your region. If unsure, contact your local power supply company. If the power supply or cables
are broken, do not use them. Contact a qualified electrical services technician or your retailer.
1. Do not use any equipment that appears damaged or incomplete. If you detect damage,
contact your dealer immediately.
2. Do not allow connectors to be exposed to long-term water immersion.
3. Do not allow electrical contacts or leads to be exposed to dust, humidity or moisture. Do not
allow electrical contacts or cable-ends to become wet.
4. The equipment must be firmly secured using appropriate fixings and fastening as
appropriate to the mounting surface that the unit is being affixed to.
Notes:
1. Do not open the camera unit, doing so invalidates the unit’s warranty.
2. Do not back-drive the pan or tilt axis of the camera. To do so will damage the motor drive
mechanism and will invalidate the warranty.
3. Do not use caustic or abrasive cleaning products on the unit.
4. In situations where there could be a risk of injury should any part of the assembly become
detached for any reason and fall, normal safety precautions should be employed.
5. Use only the power source types indicated in this user guide or provided with the unit.
6. All power supplies should be appropriately fused.
7. Take extra care lifting or moving units due to their weight.
8. The central PT unit should be installed by itself with no payloads attached. The
camera/sensor and Radar payloads fitted individually, after it has been secured.
9. Take care to allow space around the unit for Pan and Tilt motion.
10.Take care to avoid striking persons or objects when the camera is in motion.
11. Not fitting the provided sun shields will invalidate the systems warranty.
12.This guide only concerns itself with the Mechanical Installtion of the System.
JAEGER INSTALLATION GUIDE
Commercial in Confidence 5/26
System Overview
Overivew
The Jaeger PT system generally comprises of;
1. The Jaeger PT Unit
2. QTY1 EO (Daylight Camera)
3. QTY1 Ti (Thermal Camera)
However, as the Jaeger is a highly modular platform the number and nature of payloads may vary
from unit to unit. This Installation Documention only considers the standard system as noted
above. If there is ANY uncertainy brought about by other combinations of payloads then Silent
Sentinel should be consulted prior to any installation efforts.
Power / Interface Requirements
Votlage Input: 48 VDC
Power Draw (PT Only): 100W (Max 150W)
These figures do not include the requirements of any large payloads, optional heating or cooling
devices added within the camera enclosures, nor optional infra-red lighting systems. Please consult
Silent Sentinel for further guidance.
Top mounted (fixed) payloads are powered separately from the PTZ system.
System Orientation
The image on the top left (Figure 1) shows a ‘MK2’ Jaeger with the additional spacer fitted. This
spacer can be used to identify the ‘Back’ and ‘Front’ of the PT Unit. If you face the rear of the unit,
Figure 2
Figure 1
JAEGER INSTALLATION GUIDE
Commercial in Confidence 6/26
the Daylight attachment point is on the left, the themral on the right. Therefore, the side connector
shown in this image is the Dayligth Connector. This is demonstrated further in Figure 2.
PLEASE NOTE: THE ACTUAL INPUT VOLTAGE OF THE UNIT MAY VARY SHOULD
ADDITIONAL / DIFFERING MODULES BE USED. ALWAYS CONSULT THE TEST REPORTS
DELIVERED WITH THE UNIT. DEPENING ON THE MODULES PROVIDED THE INSTALLATION
LOCATIONS MAY ALSO VARY. IF THE SYSTEM HAS MORE THAN TWO PAYLOADS PLEASE
REFER TO SILENT SENTINEL FOR GUIDANCE.
JAEGER INSTALLATION GUIDE
Commercial in Confidence 7/26
Mechanical Installation
Overview
The system should be installed in the following order;
1. Pan / Tilt securely mounted to the Mast / Installation Location
2. RADAR / Top Mount Device securely installed
3. Side Payloads
4. Cable / PSU
Note: The system should not be powered on when any of the payloads / top mounts are attached.
Fixtures and Fittings;
The followings fittings are providing with the Jaeger System.
Figure 3 Jaeger Fittings
1. Sun Shield Fixings;
a. QTY4 –M4x10
b. QTY4 –M4 Nylon Washers
2. Top Mount Fittings;
a. QTY4 –M6x35
3. Side Payload Fittings;
a. QTY8 –M5x10
i. QTY4 for each Payload
4. Main Jaeger Fittings
a. QTY4 –M8x60
b. QTY4 –Spring Washers
c. QTY4 –M8 Nyloc Nuts
5. Duralac
a. To be used on all threads
Figure 4 - Duralac
JAEGER INSTALLATION GUIDE
Commercial in Confidence 10/26
Attaching the Side Payloads
Note: please ensure you are attaching the payloads to the correct side. Please refer to the Ssytem
Overview section for further information.
Step
Detail
1
Protective caps are fitted to the ends of the shafts
to prevent moisture and impact damage to the
electrical connections.
Remove the three securing screws from the tilt
cover cap and remove the cap from the tilt shaft.
Note: The IP67 protection of the unit is
compromsied whilst this cap is removed and the
payload is unattached.
2
Securely hold the tube and offer it up so that the
alignment holes engage on the ends of the rods.
Level the tube so that the connector faces are
parallel with no leaning in any direction.
Push the tube inwards, along the alignment rods
such that the connector assembly engages.
Care should be taken to keep the tube level so as
to reduce the risk of damage to the electrical plug
assembly.
Table of contents
Other Silent Sentinel Thermal Camera manuals
