IG09 Datum 25.08.1999 Art.Nr. 76363 Z.Nr. 8661031 Änd.Stand 339/99 5
ENGLISH
1. Safety information
In order to carry out installation correctly, we
stronglyrecommendthisdocumentisreadvery
carefully. This will ensure your own safety and
the operating reliability of the device.
• Your device has been quality controlled, te-
sted and is ready for use. Please respect all
warnings and information which are marked
eitherdirectlyonthedeviceorinthisdocument.
• Warrantycanonlybeclaimedforcomponents
supplied by SIKO GmbH. If the system is used
togetherwithotherproducts,thewarrantyforthe
complete system is invalid.
• Repairs should be carried out only at our
works. If any information is missing or unclear,
please contact the SIKO sales staff.
2. Identification
Please check particular type of unit and type
numberfromtheidentificationplate.Typenum-
berandthecorrespondingexecutionareindica-
ted in the delivery documentation.
e.g. IG09-0023
type number
type of unit
User Information
IG09
Incremental encoder
3. Installation
The unit should be used only up to the IP-
protectionlevelstated.Protecttheunit,ifneces-
sary,againstenvironmentalinfluencessuchas
sprayedwater,dust,knocks,extremetempera-
tures.
Stick gasket to encoder's mounting face. Slide
IG09 onto the solid shaft, insert torque pin into
thepreboredmountingholeandusegrubscrew
to fix the IG09's hollow shaft to the machine's
solid shaft (see fig. 1).
• Ensure sliding fit between solid shaft and
IG09.
• Ensure accurate shaft alignment and mount
theIG09withoutforce.Donotexceedthevalues
for the maximum axial and radial shaft load. If
the shaft is not correctly aligned, strain on the
bearingswill result,which maycauseoverhea-
tingandirreparabledamage.
• Especially when using torque pin type A for
fixing,ensurethat IG09doesnotjam andthatit
ismountedwithoutstrain.Pleaserememberthis
whenchoosingtheIG09'sborediameter.
• Avoid knocking the unit.
Fig. 1: Mounting instructions
If encoder IG09 is to be mounted with an inter-
mediate plate (option) first fix the plate as
describedaboveand thenmountthe encoder.
4. Electrical connection
• Switchpoweroffbeforeanyplugisinsertedor
removed!
• Any wiring must only be carried out without
power.
TorquepintypeA : pinø 6 h9
type B : bore ø 10 +0.8
