SIIG Low Profile USB Adapter User manual

Low Profile USB Adapter

Quick Installation Guide

04-0192A

Introducing the Low Profile USB Adapter

The Low Profile USB Adapter conforms to the new PCI card form factor

standard made for space constrained system designs. It is a

high-speed Universal Serial Bus (USB) host adapter that has more

user-friendly features than the current I/O interfaces such as serial/

parallel ports. It works with all types of USB devices including digital

cameras, PC video cameras, scanners, joysticks and more.

Features and Benefits

• Compliant to USB Specification, Version 1.1

• Completely implements OpenHCI Specification, Version 1.0a

• Compliant to PCI Specification, Version 2.1

• Fully compatible with Windows Standard OHCI drivers

• User friendly plug-n-play and hot-swapping features allow

you to attach/remove USB devices without turning your

system off

• Provides 2 downstream ports for USB device connections

• Supports both 12 Mbps and 1.5 Mbps data transfer modes

Dimensions:

• PCB: 119.91 mm (L) x 64.41 mm (H)

• Bracket: 18.42 mm (W) x 79.20 mm (H)

System Requirements

• Pentium or equivalent computer with one available PCI slot

• Windows 98/98 SE/ME/2000

Package Contents

• One Low Profile USB Adapter

• One 5-year warranty card

• This quick installation guide

Hardware Installation

General instructions for installing the card are provided below, since

the design of computer cases and motherboards vary. Refer to your

computer’s reference manual for further information, if needed.

Static Electricity Discharge may permanently damage your system.

Discharge any static electricity build up in your body by touching

your computer’s case for a few seconds. Avoid any contact with

internal parts and handle cards only by their external edges.

1. Turn OFF the power to your computer and any other connected

peripheral devices. Unplug the computer's power cord.

2. Remove your computer’s cover and install the card in an

available PCI slot.

3. Push the board down firmly, but gently, until it is well seated.

4. Secure the card and replace the cover.

Software Installation

Windows 98/98 SE:

Windows 98/98 SE will automatically detect the presence of the

Low Profile USB Adapter. Follow the procedures below to install the

host adapter drivers:

1. At the Add New Hardware Wizard, click Next.

2. Choose Search for the best driver for your device

(Recommended) and click Next.

3. Insert Windows 98 CD-ROM and check CD-ROM check box.

4. Click Next, Next, and Finish to complete driver installation.

Windows ME/2000:

Windows ME and Windows 2000 will automatically detect and

install the correct driver for this adapter. No installation is needed.

Technical Support

QUESTIONS? SIIG’s Online Support has the answers! Simply

visitourwebsiteatwww.siig.com andclickonONLINE SUPPORT.

Our online support database is updated daily with new drivers

and solutions. The answers to your problems could be just a few

clicks away.

Return Merchandise Authorization (RMA)

SIIGwarrants to theoriginal buyer ofthe product thatthe hardware

is free of defects in materials and workmanship for a period of one,

two or five years from the date of purchase. If your product fails to

be in good working order during the warranty period, you may

return it to SIIG for repair or replacement at SIIG's option.

To return the product, you need to follow these steps.

Step 1: Contact SIIG's RMA Department

Toobtain an RMAnumber, SIIG's RMADepartment can bereached

by phone at (510)413-5333 or fax at (510)657-5962 or email at

[email protected]. In order to issue an RMA number, the product

serial number is required. This number can be found on the side of

the box and on the back of the product.

Step 2: Complete the RMA form

• Fill out your Return Merchandise Authorization (RMA) form, and

include it in the package with the product.

• Properly pack the product for shipping. All software, cable(s) and

other accessories that came with the original package must be

included.

• ClearlywriteyourRMAnumberonthetopofthereturnedpackage

and on the accompanying RMA form.

SIIG will refuse to accept any shipping package, and will not

beresponsibleforaproduct returned without an RMA number

posted on the outside of the shipping carton.

Step 3: Ship the Product

You are responsible for the cost of shipping back to SIIG at the

following address:

SIIG, Inc. RMA#_______________

6078 Stewart Ave.

Fremont, CA 94538

SIIG will ship the repaired or replaced product via UPS Ground or

US Mail at no cost to you.

PRODUCT NAME MODEL NUMBER

Low Profile USB Adapter LP0402

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio and

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced radio or TV technician for help

Caution:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate

this equipment

THE PARTY RESPONSIBLE FOR

PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Ave.

Fremont, CA 94538-3152

Low Profile USB Adapter is a trademark of SIIG, Inc.

SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows

NT are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of

Intel Corporation. Other names used in publication are for identification only and may be

trademarks of their respective companies.

Table of contents

Other SIIG Computer Hardware manuals

SIIG

SIIG JJ-E01111-S1 User manual

SIIG

SIIG SC-SAE612-S1 User manual

SIIG

SIIG DP FireWire 800 3-Port PCIe User manual

SIIG

SIIG CE-H23J11-S1 User manual

SIIG

SIIG CyberParallel Dual User manual

SIIG

SIIG I/O Expander 2S User manual

SIIG

SIIG Serial ATA 4-Channel PCI User manual

SIIG

SIIG PCIe to ExpressCard Bay User manual

SIIG

SIIG UltraATA 133 PCI User manual

SIIG

SIIG SIIG 2-Port Serial 950-Value User manual

SIIG

SIIG SATA II-150 PCI User manual

SIIG

SIIG Dual Profile Hi-Speed USB 4-Port PCI User manual

SIIG

SIIG UltraATA 133 PCI User manual

SIIG

SIIG USB 2.0 Bay Reader/Writer+Floppy User manual

SIIG

SIIG 104-0487A User manual

SIIG

SIIG ID-P40411-S1 User manual

SIIG

SIIG JJ-E02111-S1 User manual

SIIG

SIIG CyberParallel Dual User manual

SIIG

SIIG ExpressCard 11-in-1 Reader/Writer User manual

SIIG

SIIG SC-SAE512-S1 User manual

SIIG

SIIG AV-GM0AK3-S1 User manual

SIIG

SIIG JJ-EC1012-S1 User manual

SIIG

SIIG JJ-E02211-S1 User manual

SIIG

SIIG Network Device EVTEK-5103 Installation guide

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual