SignaMax 065-7331GPOEP User manual
065-7331GPOEP
16-port 10/100/1000BaseT/TX
PoE/PoE+ plus
2 -- 1000Base SFP port Switch
User’s Manual
Overview
The Signamax 065-7331GPOEP PoE/PoE+ Switch is
an 18-port unmanaged Gigabit PoE/PoE+ switch with 16
10/100/1000BaseT/TX unmanaged PoE/PoE+ ports
supporting IEEE 802.3af/at terminal devices as a PoE
Power Source Equipment (PSE). In addition, when a
device other than a PoE Powered Device (PD) is
connected to a PoE-equipped port, the switch will not
supply PoE power to that port, ensuring safety for
data-only connections. This device provides full 30 watt
power to all sixteen PoE/PoE+-capable ports. It also
supports two 1000Base SFP ports for fiber backhaul and
distributed PoE/PoE+ solutions. It has a 1U rack mount
form factor, with the rack mounting hardware included.
PoE switches supply power and transfer data by
using network cables; network cables do not require a
qualified electrician to install them, and can be located
anywhere, reducing the time and expense of having
electrical power cabling installed.
The Signamax 065-7331GPOEP is the ideal choice for
those who desire to economically deploy wireless
access points, IP cameras, access control devices, and
IP telephones.
Key Features
•IEEE 802.3af/at Power over Ethernet PoE/PoE+
compliant.
•Supports sixteen (16) 10/100/1000 Mbps Gigabit
Ethernet
10/100/1000BaseT/TX PoE/PoE+ ports with 2 Gigabit
1000Base SFP uplink ports (18 ports total).
•Provides up to 30 watts for each PoE port. (250 watts
total power supply).
•Automatically detects presence of and the PoE Power
Class level of a Powered Device.
•36 Gbps switching bandwidth. Full wire-speed
non-blocking reception and transmission.
•Forwarding rate:
o1000 Mbps: 1,488,000 pps
o100 Mbps: 148,800 pps
o10 Mbps: 14,880 pps
•Status LEDs:
oSystem power
oPoE
oSpeed (10/100/1000 Mbps)
oLink / Activity
•Store-and-forward switching method.
•Back pressure Flow Control for Half-Duplex mode.
•IEEE 802.3x Flow Control for Full-Duplex mode.
•Plug and Play.
电
⼒
线
POW+DATA
DATA
User Guide:
1. Check the PoE switch:
1. Please check the enclosure, the RJ-45 ports, and the LED
indicators, making sure they are ok.
2. Connect the PoE switch to AC power, making sure the
initialization of the PoE switch occurs as below:
•POE indicator is off when power is connected.
•POW indicator is on and remains on after connection
to AC power.
•Other indicators will be on, then off after one or two
seconds.
2. Cable connection:
1. Connect the Switch to Computer or other PD (such as an IP
camera or wireless AP) by Cat. 5 or better cables.
2. Connect the external power cord to the Switch and the
power cord to AC plug
3. Turn on the switch
Caution:
1) All operation should be provided only by a qualified service
technician.
2) Make sure the PDs you connected to the Switch are
compliant with IEEE 802.3af or 802.3at.
3) Make sure the power is off before unplugging the AC power.
4) Makes sure all PoE PDs power consumption is less than
total power
5) Please avoid any heavy thing placed on the Switch.
6) Do not use this product near water, for example, in a wet
basement or near a swimming pool.
7) Avoid using this product during an electrical storm. There
may be a remote risk of electric shock from lightning.
8) For outdoor use, the Switch itself should be housed inside a
protective enclosure.
9) Cutting power during a firmware upgrade can damage your
device.
10) Only use attachments/accessories specified by the
manufacturer.
11) Opening the switch or tampering with the warranty sticker
can void your warranty.
Technical specifications:
Applicable
Standards
IEEE 802.3i 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000Base–X (via SFP module)
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet
Speed 100/1000 Mbps Full Duplex
Network Port：
：：
：10/100/1000BaseT/TX Ethernet RJ-45 Port
Performance Bandwidth：
：：
：36 Gbps
Network delay（
（（
（100 to 1000 Mbps）：
）：）：
）：Max 20 microseconds (64
Byte packets)·
Network delay（
（（
（1000 to 1000 Mbps）：
）：）：
）：Max 20 microseconds
(64 Byte packets)·
MAC Address Capacity: 8K
Frame Filtering and transmission rate：
：：
：
•10 Mbps: 14,800 pps
•100 Mbps: 148,800 pps
•1000 Mbps: 1,488,000 pps
LED Status
Indicators
System, Power supply
Per Port: Link/ACT speed, 10/100M network mode, 1000M
network mode, POE support, POE supply
Power Supply Maximum Power Supply Capacity: 250W
Physical
Characteristics
Dimensions:
17.3 x 13.78 x 1.73 in. W x D x H (440 x 350 x 44 mm)
Weight：
：：
：
11 lb. (5 kg)
Environmental
Specifications
Operating Temp：
：：
：32°~104°F (0°~40°C)
Storage Temp：
：：
：-40~158°F (-40~75°C）
））
）
Operating Humidity：
：：
：10%～
～～
～90% RH Non-condensing
Storage Humidity：
：：
：5%～
～～
～90% RH Non-condensing
Certificate CE. FCC ROHS
Warranty 5 Year
Contact Information:
SIGNAMAX, INC
an AESP Company
999 N.W. 159th Drive
Miami, Florida 33169, U.S.A.
Phone: 305-944-7710 Fax: 305-949-4483
Sales: 800-446-2377
Tech. Support: 800-446-2377, ext. 201
Http://www.signamax.com
E-mail: [email protected]
Table of contents
Other SignaMax Switch manuals
SignaMax
SignaMax 065-7931 User manual
SignaMax
SignaMax 098-8040 User manual
SignaMax
SignaMax C-310 Series User manual
SignaMax
SignaMax 065-7309POEP User manual
SignaMax
SignaMax 065-7408 User manual
SignaMax
SignaMax 500-7622GE2GS User manual
SignaMax
SignaMax 065-7520 User manual
SignaMax
SignaMax 065-7931 User manual
SignaMax
SignaMax 065-7841 User manual
SignaMax
SignaMax C-600 Series User manual
SignaMax
SignaMax 065-7508 User manual
SignaMax
SignaMax 065-7940B-WS User manual
SignaMax
SignaMax 065-7032A User manual
SignaMax
SignaMax FO-065-7110 Series User manual
SignaMax
SignaMax 065-7840 User manual
SignaMax
SignaMax 065-7111F Series User manual
SignaMax
SignaMax 065-7890FSFPDP User manual
SignaMax
SignaMax 65-7542 User manual
SignaMax
SignaMax 065-7341 User manual
SignaMax
SignaMax FO-065-7732A User manual
