Sigmac LE15AB User manual
LE15AB
1 2
2-5
Before we start
CONTENTS
2Safety
Instrucons Important Safety Instrucons
36
What’s in the
Box
47
Control Buons
& Indicators
5
9
Main Power Connecon
Cable TV/Antenna Connecon
HDMI Connecon
PC/VGA Connecon
Component Connecon (YPbPr)
Remote Control Buons Explained
Remote Baery Setup
9
10
10
11
11-12
13
13
14
15-16
17
18
19- 21
22-24
25-26
Connecon
7
27
27
28
29
TROUBLESHOOTING
DISPLAY MODE
TV Stand Installaon
SUPPORT
Menu
Funcons
6Remote
Funcons
8Troubleshoong
Basic Use
Selecng Input Source
Appllcaon
Operang the Menu
Customizing the PICTURE Sengs
Customizing the Audio Sengs
Customizing the TIMER Sengs
Customizing the SETUP Sengs
Customizing the LOCK Sengs
Customizing the CHANNEL Sengs
1
Before you start1.
Safety Instrucons2.
Congratulaon on the purchase of your new SIGMAC TV ! For Maximum Quality and Safety please read
the instrucon below before making any adjustments and operang the TV , and retain it for future
reference. Make sure the TV was not damaged in transit. If the TV is damaged, immediately contact your
dealer. Make sure that you have all the accessories according to the model.
CAUTION
This symbol is intended to alert the user to the presence
of important operang and maintenance instrucons in
the manual accompanying the appliance.
This symbol is intended to alert the user to avoid the risk
of electric shock, do not disassemble this TV except
qualified service personnel.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO WATER OR MOISTURE.
RISK OF ELECTRIC SHOCK - DO NOT OPEN
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QULIFIED SERVICE PERSONNEL
SIGMACLE15AB
2
Cart/apparatus
17) Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is an
important feature. Removing the grounding pin will increase the fisk of damaging the equipment
18) Do not expose the equipment to extreme temperature or to direct sunlight, as the equipment
may heat up and suffer damage.
SIGMACLE15AB
3
SIGMACLE15AB
4
Please immediately pull out the AC power plug from
adapter if there is an abnormal sound, smell or the
LCD/LED TV has sound but no picture.
The LCD/LED TV should be avoid free from water/moisture,
damp and dust to prevent electrical shock and short
circuits.
Do not cover the ventilation openings with table
clothes, curtains, newspapers etc.
The LCD/LED TV should be keep away from high
temperature heating objects or direct
sunlight. It requires good ventilation.
Allow 10cm between the LCD/LED TV and
other appliances or cabinet walls.
When you wipe the front cabinet, please make sure hte
power plug is pulled out and use a soft, dry, lint-free cloth
and handle it with care. Do not repeatedly wipe he panel,
nor scrape, tap or strike the panel with a hard object.
Do not wipe the LCD/LED TV with any petrol, chemical
or alcohol based solvents as it will lead to damage
the panel / cabinet of TV.
Safety
SIGMACLE15AB
5
Do not place the LCD/LED TV on an unstable
surface.
Do not place the power cord or other cables across
a walkway in case you may trip on it. Do not overload
the power or power socket.
Do not disassemble the back cover as it contains
high voltages inside and will cause electric shock.
Internal adjustments and checks should only be
done by qualified professionals.
Pull out the power cord and antenna cable during
electrical storms so the LCD/LED TV will not damaged by
electrical surges. Keep all people away from the
antenna cable during electrical storms.
The TV set should not be subjected to water
droplets or water splash, equipment should not
be placed on or near objects filled with liquids
Do not place open flame sources, such as lit candles
on or near the LCD/LED TV
Please pull out the power plug and contact tech
support there are abnormal objects or
water in the TV.
Safety
User Manual
User
Manual
What’s in the Box3.
SIGMAC HD LED/LCD TV-LE15AB
AAA Baeries x 2
Remote Control
Adapter
SIGMACLE15AB
6
Press and slide out the baery cover by the following the direcon shown by the arrow on the surface of
the cover.
Insert two AAA Baeries into the remote control. Make sure that you match the (+) and (-) symbols on the
baeries with the (+) and (-) symbols inside the baery compartmet.
Put the baery cover back in place.
NOTE: Use only high quality industry approved AAA Baeries. Do not mix new and old baeries.
Inserng baeries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to
personal injury. Dispose old baeries in accordance with the Federal laws and regulaons. Keep baeries
away from children and pets.
When not using the remote control for a long period of me, make sure to remove the baeries.
Baery Installaon
4. Control Buons & Indicators
SIGMACLE15AB
7
ITEM
1
2
3
4
5
6
7
SOURCE
MENU
VOLUME
CHANNEL
STAND-BY
IR
LED
-Chooses between different input signal sources.
-Display the OSD (on screen display) Menu.
-Press again to turn the OSD off
-Adjusts the volume up and down.
-Changes sengs for items when in the OSD Menu Mode.
-Turns the LED TV on and off. (puts on stand-by)
-Infrared Receiver. (IR)
-The LED light indicates status of the TV.
Blue : ON, Red : Stand-by
-Change the channels up and down.
-Selects sub-menu items when in the OSD Menu mode.
DESCRIPTION
1 5
23 4
SIGMACLE15AB
8
Connecons
1
USB Input
2
3Composite Video in (RCA type video in)
4
5
6
RF/Coax Input
7
Component Video in (Y,Pb,Pr)
8
PC Audio in (3.5mm Audio in port)
Headphone Audio out (3.5mm Audio in port)
9
PC-in (VGA/RGB)
10
HDMI 2 in (Digital Audio & Video in)
HDMI 1 in (Digital Audio & Video in)
11
12
Coaxial Audio out (Digital Audio out)
NO. DESCRIPTION
YPbPr / AV Audio in (L/R RCA type Audio in port)
DC 12V Input
Main Power Connecon.
To watch “Free on air local channels”, a good TV antenna system needs
to be installed for best picture quality and sound (varies with the area).
Check with your local electronics store for a standard TV Antenna. This can be connected to the TV via
the coaxial/RF Antenna connecon as shown above using the 75 ohm plug.
You can also use the service from your local Cable TV provider and connect as above using a 75 ohm plug
connecon.
Coaxial Cable from antenna or
your Cable TV Provider or from
any other device with a RF signal
(75 ohm Plug)
Connect the power cord correctly as shown.
Cable TV / Antenna Connecon(Coaxtal/RF-1 Input channel).
Antenna in
Port on TV
AUDIO
VIDEO
Coax Plug on
Antenna
Cable
AUDIO
VIDEO
SIGMACLE15AB
9
Table of contents
Other Sigmac TV manuals
