SIGMA TEK ETT 1962 User manual
ETT 1962
Touch Operating Panel
Date of creation: 04.08.2015
Version date: 18.05.2017
Article number: 01-230-1962-E
Publisher: SIGMATEK GmbH & Co KG
A-5112 Lamprechtshausen
Tel.: 06274/4321
Fax : 06274/4321-18
WWW.SIGMATEK-AUTOMATION.COM
Copyright © 2015
SIGMATEK GmbH & Co KG
Translation from German
All rights reserved. No part of this work may be reproduced, edited using an electronic system, duplicated or dis-
tributed in any form (print, photocopy, microfilm or in any other process) without the express permission.
We reserve the right to make changes in the content without notice. The SIGMATEK GmbH & Co KG is not responsi-
ble for technical or printing errors in the handbook and assumes no responsibility for damages that occur through
use of this handbook.
TOUCH OPERATING PANEL ETT 1962
18.05.2017 Page 1
Touch Operating Panel ETT 1962
The ETT 1962 is an intelligent terminal for programming and visualization of automated
processes. Process diagnostics as well as operating and monitoring automated procedures
are simplified using this terminal.
A resistive glass touch screen serves as the input medium for process data and parame-
ters. The output is shown on a 19" SXGA TFT color display.
With the LSE mask editor, graphics can be created on the PC, then stored and displayed
on the terminal.
The available interfaces can be used to exchange process data or configure the terminal. In
the internal Flash memory, the operating system, application and application data are
stored.
ETT 1962 TOUCH OPERATING PANEL
Page 2 18.05.2017
Contents
1Technical Data ........................................................................ 4
1.1 Performance Data.........................................................................4
1.2 Electrical Requirements...............................................................5
1.3 Terminal.........................................................................................5
1.4 Environmental Conditions...........................................................5
1.5 Display...........................................................................................6
1.6 Control Unit...................................................................................6
1.7 Miscellaneous ...............................................................................6
2Mechanical Dimensions......................................................... 7
3Chemical Resistance.............................................................. 8
3.1 Touch Interface.............................................................................8
4Connector Layout................................................................... 9
4.1 Front Connector............................................................................9
4.2 Status Displays...........................................................................10
4.3 Rear Connectors.........................................................................11
4.3.1 Applicable Connectors.......................................................................13
5cooling....................................................................................14
6Mounting Instructions...........................................................14
7Buffer Battery.........................................................................14
7.1 Exchanging the Battery..............................................................15
TOUCH OPERATING PANEL ETT 1962
18.05.2017 Page 3
8Wiring Guidelines..................................................................17
8.1 Ground.........................................................................................17
8.2 Shielding......................................................................................17
8.3 ESD Protection............................................................................17
8.4 USB Interface Connections .......................................................17
9Process Diagram...................................................................18
10 Status and Error Messages..................................................19
11 Cleaning the Touch Screen..................................................27
12 Disposal .................................................................................28
ETT 1962 TOUCH OPERATING PANEL
Page 4 18.05.2017
1 Technical Data
1.1 Performance Data
Processor
EDGE2 Technology
Processor core
2
Internal Cache
32-kbyte L1 Instruction Cache
32-kbyte L1 Data Cache
512-kbyte L2 Cache
Internal program and
data memory (DDR3 RAM)
512-Mbyte
Internal remnant
data memory
512-kbyte SRAM (battery buffered)
Internal storage device
1-Gbyte microSD card
Internal I/O
no
Interfaces
1x USB Host 2.0, Type A (front)
1x USB Host 2.0, Type A (rear, on circuit board)
2x Ethernet 10/100 (RJ45)
Internal interface connections
and devices
1x TFT LCD color display
1x USB (touch connection)
Display
Resolution
19" TFT color display
1280 x 1024 Pixels
Control panel
Glass touch screen (resistive touch)
Real-time clock
yes
Cooling
passive (fanless)
TOUCH OPERATING PANEL ETT 1962
18.05.2017 Page 5
1.2 Electrical Requirements
Supply voltage
typically +24 V DC
minimum +18 V DC
maximum +30 V DC
Current consumption of power
supply at +24 V
0.85 A
(without externally connected devices)
1 A
(with externally connected devices)
Inrush current
1,2 A (3 ms)
1.3 Terminal
Dimensions
360 x 462 x 57 mm (W x H x D)
Weight incl. Mounting brackets
typically 7 kg
1.4 Environmental Conditions
Storage temperature
-20 ... +60 °C
Environmental temperature
0 ... +50 °C
Humidity
10-90 %, non-condensing
EMC tolerance
EN 61000-6-2 (industrial area): EMV resistance
EN 61000-6-4: Noise emission
Vibration resistance
EN 60068-2-6
2-9 Hz: Amplitude 3.5 mm
9-200 Hz: 1 g (10 m/s²)
Shock resistance
EN 60068-2-27
15 g (150 m/s²),
duration 11 ms, 18 Shocks
Protection type
EN 60529:
protected through the housing
Front: IP54
Cover: IP20
ETT 1962 TOUCH OPERATING PANEL
Page 6 18.05.2017
1.5 Display
Type
19" TFT color display
Resolution
SXGA, 1280 x 1024 pixels
Color depth
24-bit (16 777 216 colors)
Pixel size
0.294 x 0.294 mm
Active surface
376.3 x 301.1 mm
Backlighting
LED
Contrast
typically 2000 : 1
Brightness
typically 300 cd/m²
Angle CR > 10 from
left and right 89°, above and below 89°
1.6 Control Unit
Touch pad
resistive glass foil glass touch panel
Active surface
376.3 x 301.1 mm
Resolution
12-bit (4096 x 4096)
Touch precision
< 1.5 % of maximum value (5.6 mm)
Data wheel
no
Buttons
no
1.7 Miscellaneous
Article number
01-230-1962
Hardware version
1.x
Software macro
LSE
LASAL operating system
Project backup
internally on the microSD card
TOUCH OPERATING PANEL ETT 1962
18.05.2017 Page 7
2 Mechanical Dimensions
ETT 1962 TOUCH OPERATING PANEL
Page 8 18.05.2017
3 Chemical Resistance
3.1 Touch Interface
Solution
Visual Effect
Coal tar oil / toluene
None
Trichloroethylene
None
Acetone
None
Alcohol
None
Benzine
None
Machine oil
None
Ammonia
None
Glass cleaner
None
Mayonnaise
None
Ketchup
None
Wine
None
Salad oil
None
Vinegar
None
Table of contents
Other SIGMA TEK Touch Panel manuals
Popular Touch Panel manuals by other brands
IBASE Technology
IBASE Technology ASTUT-152-RE1S user manual
YASKAWA
YASKAWA TP 610C manual
B&R
B&R Power Panel C Series user manual
Beijer Electronics
Beijer Electronics X2 control Hardware and installation manual
AXIOMTEK
AXIOMTEK GOT321W-521 user manual
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Operation manual
