SIGLENT SSM5000A Series User manual

QS10050_E01A

SSM5000A series

Series

Switch Matrix

QuickStart

SIGLENT TECHNOLOGIES CO., LTD

SSM5000A Switch Matrix Quick Start 1

Contents

1. Copyright and statement...............................................................................................................2

2. General safety summary ................................................................................................................2

3. General inspection ...........................................................................................................................3

4. Preparing for use ..............................................................................................................................3

5. Front panel..........................................................................................................................................5

6. Rear panel ...........................................................................................................................................7

7. User interface.....................................................................................................................................8

8. Firmware operation ...................................................................................................................... 10

9. Help information ........................................................................................................................... 11

10. Remote control ...................................................................................................................... 11

11. Product certification............................................................................................................. 11

12. For more product information ......................................................................................... 11

2SSM5000A Switch Matrix Quick Start

1. Copyright and statement

SIGLENT is the registered trademark of SIGLENT TECHNOLOGIES CO., LTD.

SIGLENT products are protected by patent law worldwide.

Information in this publication replaces all previously corresponding material.

SIGLENT reserves the right to modify or change parts of or all the specifications or pricing

policies at the company’s sole decision.

Any method of copying, extracting or translating the contents of this manual is not allowed

without the permission of SIGLENT.

2. General safety summary

Carefully read the following safety precautions to avoid any personal injury or damage to

the instrument and any products connected to it. To avoid potential hazards, please use the

instrument as specified:

Only qualified technicians can carry out maintenance of the product.

Only the power cord designed for the instrument and authorized by the local country could

be used.

The instrument is grounded through the protective earth conductor of the power cord. To

avoid electric shock, please make sure the instrument is grounded correctly before

connecting its input or output terminals.

The potential of the signal wire ground is equal to the earth, so do not connect the signal

wire to a high voltage.

To avoid fire or electric shock, please look over all ratings and safety labels on the

instrument. Before connecting the instrument, please read the manual carefully to gain

more information about the ratings.

Do not touch exposed contacts or components when the power is on.

To avoid short-circuiting to the interior ofthe device orelectricshock,pleasedo notoperate

the instrument in a humid environment.

To avoid damage to the device or personal injury, it is important to operate the device away

from an explosive atmosphere.

To avoid the influence of dust and moisture in the air, please keep the surface ofthe device

clean and dry.

Safety terms and symbols:

Terms on the product, these terms may appear on the product.

DANGER: Indicates direct injuries or hazards that may happen.

WARNING: Indicates potential injuries or hazards that may happen.

CAUTION: Indicates potential damages to the instrument or other property that may

happen.

SSM5000A Switch Matrix Quick Start 3

Symbols on the product, these symbols may appear on the product:

Hazardous Voltage Warning Protective Ground Earth Chassis Ground

3. General inspection

Inspect the shipping container:

Keep the shipping container or cushioning material until the contents of the shipment

have been completely checked and the instrument has passed both electrical and

mechanical tests. The consigner or carrier will be responsible for damages to the

instrument resulting from shipment. SIGLENT will not provide free maintenance or

replacement

Inspect the instrument:

If the instrument is found to be damaged, defective, or fails in electrical or mechanical

tests, please contact SIGLENT.

Check the accessories:

Please check the accessories according to the packing list. If the accessories are

incomplete or damaged, please contact your SIGLENT sales representative.

4. Preparing for use

Dimensions:

Figure 4-1 Front View (unit: mm)

4SSM5000A Switch Matrix Quick Start

Figure 4-2 Top View (unit: mm)

Adjust the supporting legs:

For benchtop operation, you may want to use the supporting legs.Adjust the supporting

feet appropriately to tilt the equipment upwards.

SSM5000A Switch Matrix Quick Start 5

Figure 4-3 adjusting of supporting legs

Connect to AC power supply:

The equipment accepts 100-240 V, 50/60/400HzAC power supply. Please use the power

cord provided in the accessory to connect the instrument to the power source

5. Front panel

Figure 5-1 Front panel

Table 5-1 Front panel area description:

No.

Items

Description

LCD Screen

2.4inch LCD screen.

Notes: Avoid touching the LCD screen with sharp objects.

RF Ports A-D

3.5mm female RF ports, source group, usually connect to the other

instrument such as VNA, SA and so on.

RF Ports 1-24

3.5mm female RF ports, extended group, usually connect to the

DUT.

USB Hub

USB port for host remote control.

Reset

Reboot system

6SSM5000A Switch Matrix Quick Start

Indicator Lights

Warning indicator and LAN config indicator.

Power Switch

Power on/off.

Knob

Rotate the knob left or right to move a cursor (position of selected

item) or change a parameter value, the effect of pressing the knob

is the same as ‘Enter’.

Power switch:

Light-off indicates that the instrument is in the stand-by state. Pressing this button will

cause the instrument to begin the start-up process and the power switch light will turn

white.

A White light constantly on indicates the instrument is in the operating state. A short press

will cause the instrument to save the current settings and then return to the stand-by state

and the light will turn Off.

RF connectors:

Figure 5-2 Front panel RF connectors

There are two groups of RF connectors. A-D are the source group, 1-24 are the extended

group. A and B could be connected to one of 1-6 or 13-18 ports, but A and B can’t be

connected to the same number port simultaneously. Such as C and D ports, the number

of ports can be connected to are 7-12 and 19-24.

When a couple of RF connector are linked together, the corresponding port lights above

the RF connectors will be lit up with the same color.

Toavoid damageto theinstrument,theRF connectorinputsignalmust meetthefollowing:

The DC voltage and the maximum continuous RF power cannot exceed 35V and 20 dBm

respectively.

SSM5000A Switch Matrix Quick Start 7

6. Rear panel

Figure 6-1 Rear panel

Table 6-1 Rear panel area description:

No.

Items

Description

Direct

CTRL

Uses TTL voltage to control switches.

LAN

Network port for host to remote control

USB

Plugged with U-disk for version upgrading.

USB

Device

USB port for data exchange with peripherals.

Fan

Used to cool down internal components of the instrument.

AC Power

Port and

Fuse

The equipment accepts 100-240V, 50/60/400Hz AC power supply.

Pleaseconnecttheequipmentto theAC powersupplywiththe supplied

power cord. Make sure the current does not exceed the rated current

of the fuse.

Handle

Portable handle to carry the instrument conveniently.

8SSM5000A Switch Matrix Quick Start

7. User interface

Table 7-1 User interface description:

Illustration

Function description

Status

Display

The first display when instrument starts up. Display the

model, serial number, IP address, USB port status, RF

ports link status. Push the knob in this display will enter

the first setting menu.

1’st setting menu

Includes 4 sub-menus.Rotating the knob will select one of

them, then pushing knob will enter the selected sub-menu.

System menu

Display startup times, vendor, model, SN, soft version,

mainboard temperature.

Port menu

Set the link config of ports. Four steps to config:1. Rotate

the knob to select one of the four ports(A-D); 2. push the

knob to enter the config mode; 3. Rotate the knob to

change the number of linked port;4. push theknob to finish

setting and return.

IP menu

The instrument supports DHCP and static IP modes.

Rotate and push theknob to enter the mode setting (on/off

item). When OFF (Static IP) is selected, Rotate and push

the knob to config IP/SUB/GATE address.

Upgrade menu

When U-disk with version file is plugged, enter the

Upgrade menu to upgrade the system.

SSM5000A Switch Matrix Quick Start 9

Table of contents

Other SIGLENT Matrix Switcher manuals

SIGLENT

SIGLENT SSM5122A User manual

Popular Matrix Switcher manuals by other brands

Broadcast Tools

Broadcast Tools SS 8.2 Installation and operation manual

Altimium

Altimium MATF32 user manual

ALFAtron

ALFAtron ALF-MUK44N manual

Monoprice

Monoprice Blackbird 15377 user manual

Kramer

Kramer XL 3216VS Specifications

PTN

PTN FMX12 user manual

CYP

CYP nT15GX01 Operation manual

Kramer

Kramer VP-2x2 user manual

Kramer

Kramer Sierra Video 6432V5xl Specifications

TESmart

TESmart HMA0402A40 quick start guide

Octava

Octava HD4XSTPMX installation guide

Intelix

Intelix FLX-88 Installation and operation guide

Kramer

Kramer LASSEN XL 3232S Specifications

Roland

Roland XS-1HD owner's manual

Kramer

Kramer VS-66HDCPxl user manual

Atlona

Atlona AT-HDMI-22M user manual

Link

Link HD8X8 user manual

AMX

AMX AVS-OP-2020-117 Product View