Siemens Sitrans LVL200 User manual

Operating Instructions • 06/2016

Vibrating Switches

Electronics module

Sitrans LVL200

27ML19985LS31

Electronics module - Operating Instructions

33997-EN-160621

7ML19985LS31 Electronics module - Operating Instructions

33997-EN-16062133997-EN-160621

Contents

1 About this document

1.1 Function ........................................................................................................................... 4

1.2 Target group ..................................................................................................................... 4

1.3 Symbols used................................................................................................................... 4

2 For your safety

2.1 Authorised personnel ....................................................................................................... 5

2.2 Appropriate use................................................................................................................ 5

2.3 Safety instructions for Ex areas ........................................................................................ 5

3 Product description

3.1 Conguration.................................................................................................................... 6

3.2 Principle of operation........................................................................................................ 6

3.3 Packaging, transport and storage..................................................................................... 6

4 Mounting

4.1 Mounting instructions ....................................................................................................... 7

4.2 Mounting preparations ..................................................................................................... 7

4.3 Installation procedure....................................................................................................... 7

5 Setup

5.1 Setup................................................................................................................................ 9

6 Maintenance

6.1 Instrument repair ............................................................................................................ 10

7 Dismount

7.1 Dismounting steps.......................................................................................................... 11

7.2 Disposal ......................................................................................................................... 11

8 Supplement

8.1 Technical data ................................................................................................................ 12

Editing status: 2016-06-07

47ML19985LS31

Electronics module - Operating Instructions

33997-EN-160621

1 About this document

1.1 Function

This operating instructions manual provides all the information you

need for mounting, connection and setup as well as important instruc-

tionsformaintenanceandfaultrectication.Pleasereadthisinforma-

tion before putting the instrument into operation and keep this manual

accessible in the immediate vicinity of the device.

1.2 Target group

This operating instructions manual is directed to trained specialist

personnel. The contents of this manual should be made available to

these personnel and put into practice by them.

1.3 Symbols used

Information, tip, note

This symbol indicates helpful additional information.

Caution: If this warning is ignored, faults or malfunctions can result.

Warning: If this warning is ignored, injury to persons and/or serious

damage to the instrument can result.

Danger: If this warning is ignored, serious injury to persons and/or

destruction of the instrument can result.

Ex applications

This symbol indicates special instructions for Ex applications.

SIL applications

This symbol indicates instructions for functional safety which must be

taken into account particularly for safety-relevant applications.

• List

The dot set in front indicates a list with no implied sequence.

→ Action

This arrow indicates a single action.

1 Sequence of actions

Numbers set in front indicate successive steps in a procedure.

Battery disposal

This symbol indicates special information about the disposal of bat-

teries and accumulators.

7ML19985LS31 Electronics module - Operating Instructions

33997-EN-160621

2 For your safety

2.1 Authorised personnel

All operations described in this operating instructions manual must

be carried out only by trained specialist personnel authorised by the

plant operator.

During work on and with the device the required personal protective

equipment must always be worn.

2.2 Appropriate use

The electronics module is a replacement module for Sitrans LVL200

vibrating level switches.

2.3 Safety instructions for Ex areas

PleasenotetheEx-specicsafetyinformationforinstallationandop-

eration in Ex areas. These safety instructions are part of the operating

instructions manual and come with the Ex-approved instruments.

67ML19985LS31

Electronics module - Operating Instructions

33997-EN-160621

3 Product description

3.1 Conguration

The scope of delivery encompasses:

• Electronics module for SITRANS LVL200

• Documentation

– This operating instructions manual

3.2 Principle of operation

The electronics module is suitable for replacement in SITRANS

LVL200 vibrating level switches.

3.3 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its

capacity to handle normal loads during transport is assured by a test

based on ISO 4180.

The packaging of standard instruments consists of environment-

friendly, recyclable cardboard. For special versions, PE foam or PE

foil is also used. Dispose of the packaging material via specialised

recycling companies.

Transport must be carried out in due consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.

Unless otherwise indicated, the packages must be stored only under

the following conditions:

• Not in the open

• Dry and dust free

• Not exposed to corrosive media

• Protected against solar radiation

• Avoiding mechanical shock and vibration

• Storage and transport temperature see chapter "Supplement -

Technical data - Ambient conditions"

• Relative humidity 20 … 85 %

Scope of delivery

Area of application

Packaging

Transport

Transport inspection

Storage

Storage and transport

temperature

7ML19985LS31 Electronics module - Operating Instructions

33997-EN-160621

4 Mounting

4.1 Mounting instructions

If the electronics module is defective, it can be replaced by the user.

In Ex applications, only instruments and electronics modules with ap-

propriate Ex approval may be used.

4.2 Mounting preparations

In general, the electronics module can be also exchanged within the

type series against an electronics with another signal output (e.g.

relay against transistor output).

Ifyouwanttouseanelectronicsmodulewithadierentsignaloutput,

you can download the corresponding operating instructions manual

from our homepage under Downloads.

4.3 Installation procedure

To exchange the electronics module, proceed as follows:

1. Switchopowersupply

2. Unscrew the housing lid

3. Lift the opening levers of the terminals with a screwdriver

4. Pull the connection cables out of the terminals

5. Loosen the two screws with a screw driver (Torx size T10 or slot

Fig. 1: Loosen the holding screws

1 Electronics module

2 Screws (2 pcs.)

6. Pull out the old electronics module

7. Compare the new electronics module with the old one. The type

label of the electronics module must correspond to that of the old

electronics module. This applies particularly to instruments used

in hazardous areas.

8. Compare the settings of the two electronics modules. Set the

adjustment elements of the new electronics module to the same

setting of the old one.

Installation procedure

87ML19985LS31

Electronics module - Operating Instructions

33997-EN-160621

Information:

Make sure that the housing is not rotated during the electronics ex-

change.Otherwisetheplugmaybeinadierentpositionlater.

9. Insert the electronics module carefully. Make sure that the plug is

in the correct position.

10. Screw in the two holding screws and tighten them

11. Insert the wire ends into the open terminals according to the wir-

ing plan

12. Press down the opening levers of the terminals, you will hear the

terminal spring closing

13. Check the hold of the wires in the terminals by lightly pulling on

them

14. Check cable gland on tightness.The seal ring must completely

encircle the cable.

15. Screw the housing lid back on

Theelectronicsexchangeisnownished.

As a rule, an exchange of electronics must be documented internally

if Ex applications are involved.

7ML19985LS31 Electronics module - Operating Instructions

33997-EN-160621

5 Setup

5.1 Setup

When replacing the electronics module, make sure that all adjustment

elements are set to the settings of the old electronics module. Hence

the sensor is immediately ready for operation.

In general, the electronics module can be also exchanged within the

type series against an electronics with another signal output (e.g.

relay against transistor output).

Ifyouwanttouseanelectronicsmodulewithacompletelydierent

signal output, you have to carry out the complete setup.

The necessary, suitable operating instructions manual can be down-

loaded from our homepage under Downloads.

The adjustment should be carried out according to the description in

the operating instructions manual.

Setup

10 7ML19985LS31

Electronics module - Operating Instructions

33997-EN-160621

6 Maintenance

6.1 Instrument repair

If it is necessary to repair the instrument, please contact Siemens

MilltronicsProcessInstrumentsInc.Youndthelocationsonour

homepage "www.siemens.com/processautomation".

Table of contents

Other Siemens Switch manuals

Siemens

Siemens HiPath 1100 User manual

Siemens

Siemens SENTRON 3KC0 User manual

Siemens

Siemens SITRANS LVL100 User manual

Siemens

Siemens 3TS11 Series User manual

Siemens

Siemens 8DJH User manual

Siemens

Siemens SIRIUS 3SE7120 Series User manual

Siemens

Siemens RUGGEDCOM RSG2300F User manual

Siemens

Siemens SIRIUS 3SE6315 BB0 Series User manual

Siemens

Siemens pointek CLS 100 User manual

Siemens

Siemens 3VA1225-1AA 2 Series User manual

Siemens

Siemens 3VF 9 623-1 00 Series User manual

Siemens

Siemens 3KC6424-2TA20-0TA3 User manual

Siemens

Siemens SCALANCE XR-300M Administrator guide

Siemens

Siemens SIMATIC NET RUGGEDCOM RS400 User manual

Siemens

Siemens Pointek CLS200 User manual

Siemens

Siemens 3NP19 0-1FA00 Series User manual

Siemens

Siemens RUGGEDCOM RS900GP User manual

Siemens

Siemens 3VM9988-0AB1 Series User manual

Siemens

Siemens SIMATIC NET RUGGEDCOM RS930L User manual

Siemens

Siemens RUGGEDCOM i803 User manual

Siemens

Siemens 3KD36-0P Series User manual

Siemens

Siemens SIMATIC NET RUGGEDCOM RMC User manual

Siemens

Siemens 3NP1123 Series User manual

Siemens

Siemens SIRIUS User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual