Siemens HSL6EI23 User manual

Installation instructions

Instructions for use

Notice de montage et d'installation

Notice d'utilisation

HSL6EI23

HSL6EW22

Umschlag_SE_EN+FR_280509.fm Page 1 Thursday, May 28, 2009 5:54 PM

...........

Umschlag_SE_EN+FR_280509.fm Page 2 Thursday, May 28, 2009 5:54 PM

Installation instructions 2 - 15

Instructions for use 16 - 43

Notice de montage et d'installation 44 - 58

Notice d'utilisation 59 - 88

Installation instructions 2-15 | Instructions for use 16-43

Installation instructions

Safety information____________________________________________ 3

Before installation ____________________________________________ 4

Appliance........................................................................................................ 4

Ventilation area guidelines ............................................................................. 6

Electric connection ___________________________________________ 7

Gas connection ______________________________________________ 9

Installing and dismantling the appliance ________________________ 13

Converting the gas type ______________________________________ 14

Oven burner ................................................................................................. 14

General nozzle table .................................................................................... 15

Safety information

The safe operation of this appliance can only be

guaranteed if it has been assembled and installed by

a professional in accordance with these instructions.

The fitter and/or installer is liable for any damage or

faults resulting from incorrect assembly or

installation.

All installation work and adjustments, and any

conversion to a different type of gas, must be carried

out by an authorised expert in accordance with the

applicable rules and regulations enforced by the local

gas suppliers.

Always disconnect the gas supply before carrying out

any work on the appliance.

Prior to installation of the appliance, verify that the

local prerequisites (gas type and gas pressure) and

the appliance settings are compatible with one

another. The rating plate indicates the appliance

adjustment conditions.

Before installation

Note the following appliance specifications and the

guidelines relating to the ventilation area.

Appliance

Appliance dimensions Note the specified dimensions.

Installation positions This appliance can be fitted in the following positions:

• Underneath a worktop

• Above another appliance

Adjacent units Adjacent units must be made from non-combustible

materials. The fronts of adjacent units must be heat-

resistant up to at least 120°C.

Coat cut surfaces with specialist water-resistant glue.

If the appliance is to be installed close to other units,

you must observe the specified minimum clearance

distances:

Rating plate The technical data for the appliance can be found on

the rating plate on the back of the appliance and on

the left-hand side of the cooking compartment when

the appliance door is open. Never remove the rating

plate from the appliance.

The setting values are specified on the rating plate on

the rear right of the appliance.

In the table below, enter the

product number (E no.),

production number (FD no.),

factory settings for gas type and gas pressure and,

if applicable, the converted gas type and gas

pressure.

Ventilation area guidelines

This appliance may only be installed in a room with

adequate ventilation, and in accordance with the

applicable regulations and ventilation requirements.

This appliance is not connected to a smoke extraction

system. Install the appliance in a position where

natural or routed ventilation can be ensured by

means of openings to the outside or suitable air

pipes. The ventilation must ensure a continuous air

supply which is sufficient to provide the air required

for combustion and also expel expended air.

E no. FD no.

After-sales service

Gas type

Gas pressure

(factory setting)

Gas type

Gas pressure

(conversion)

Electric connection

Only a licensed expert may connect the appliance.

The appliance must be installed in accordance with

the latest IEE guidelines (Institution of Electrical

Engineers). The appliance could be damaged if

incorrectly connected.

Make sure that the voltage value of the power supply

corresponds with the value specified on the rating

plate. The rating plate is located on the back of the

appliance. Ensure that the power supply is properly

earthed and that the wiring system in the building can

withstand the load from the appliance.

If the appliance is connected directly to the power

supply, an all-pin isolating switch must be present

with a contact gap of 3 mm.

The method of connection must allow complete

isolation in accordance with the conditions for

overvoltage category III. The earth cable is excluded

from this.

Install the mains cable in such a way that it is not

trapped or squashed. The cable must not come into

contact with cut or sharp edges.

Connecting the mains

cable

The mains cable is connected via the strip terminal.

The mains cable must be of the following type:

• H05RRF or H05RNF

• 3 x 1.5 mm²

• 220-240 V~

Proceed as follows:

• Open the terminal box on the back of the

appliance.

• On the strip terminal, loosen the screw which is

holding the cable in place.

• Loosen the screw contacts. The cable must

comply with the stipulated specifications and it

must be long enough.

• Connect the yellow/green wire to terminal $.

This wire must be at least 30 mm longer than the

other wires.

• Connect the blue neutral conductor to terminal N.

• Connect the brown cable to terminal L.

This manual suits for next models

Table of contents

Languages:

Other Siemens Oven manuals

Siemens

Siemens CM636GB 1 Series User manual

Siemens

Siemens HB55AB.50B User manual

Siemens

Siemens HB 13 B W Series User manual

Siemens

Siemens HB574AB.1 User manual

Siemens

Siemens HR578G5 6B Series User manual

Siemens

Siemens HB301 0K Series User manual

Siemens

Siemens HB134JES0M User manual

Siemens

Siemens CM724G1 1S Series User manual

Siemens

Siemens HB64AA Series User manual

Siemens

Siemens HB24D 52 Series User manual

Siemens

Siemens HS836GT 6 Series User manual

Siemens

Siemens HR676G8.1A User manual

Siemens

Siemens HB64A Series User manual

Siemens

Siemens HB676G5 6 Series User manual

Siemens

Siemens HB778G3 1B Series User manual

Siemens

Siemens CB734G1 1 Series User manual

Siemens

Siemens HB533AB 0H Series User manual

Siemens

Siemens HB772G1 1 Series User manual

Siemens

Siemens HM876G2.6A User manual

Siemens

Siemens CS636GB 2 Series User manual

Siemens

Siemens HB90054 User manual

Siemens

Siemens HB76 1 Series User manual

Siemens

Siemens HS658GE 6B Series User manual

Siemens

Siemens HB10AB550E User manual

Popular Oven manuals by other brands

Bosch

Bosch HVA531NS0 instruction manual

Electrolux

Electrolux EOF6P46X user manual

NEFF

NEFF B44S32 5GB Series instruction manual

Combi

Combi BLODGETT BC142GDS Specifications

AEG

AEG COMPETENCE 311704300 Installation and operating instructions

Falcon

Falcon DOMINATOR PLUS G3106 Series Servicing instructions

Rational

Rational SCC WE 61G installation manual

Smeg

Smeg DOSPA38X User manuals

Electrolux

Electrolux air-o-convect 20 GN 2/1 user manual

Miele

Miele HR 1954-2 operating instructions

KHIND

KHIND OT50 instruction manual

Henny Penny

Henny Penny Smoker Box installation manual

Lang

Lang ECOD-AP Installation and operation instructions

AEG

AEG BEK455310M user manual

Frigidaire

Frigidaire FNGE90JGR user manual

Hotpoint

Hotpoint FE9 S831 JSH IX user manual

GE Advantium SCB2000 owner's manual

AEG

AEG DE401301DM user manual