Siemens FDOOT241-9 User manual

007005_ad_en_-- Building Technologies

2019

Control Pr

oducts and Systems

Sinteso™ S

LINE

FDOOT241-9, FDOOT241-A, FDO241, FDT241

Automatic fire detectors

For the automatically addressed detector bus FDnet

●The ideal fire detector for every application

●Line separators for uninterrupted alarm function (FDOOT241-A, FDO241 and

FDT241)

●Signal processing with ASA

technology

™ (Advanced Signal Analysis)

●Event-controlled detection behavior

●Early and reliable detection when fires occur

●Highly developed immunity to deceptive phenomena

●FDO and FDOOT suitable for wind speeds of 1…20 m/s

●Prepared for future requirements thanks to its programmability

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Properties

Features

●Resistant to environmental and interfering influences such as dust, fibers, insects,

moisture, extreme temperatures, electromagnetic interference, corrosive vapors,

vibration, artificial aerosols, and atypical fire phenomena

●Shock resistant, theft protection as an accessory

●Time and process-dependent detection behavior

●Proven immunity to faults in power electronics

●Protected electronics, high-quality components

●Sophisticated sensors and electronic monitoring

●Internal alarm indicator (IAI), 360° visibility, alignment not necessary

●Integrated line separator

●'One-man' testing, commissioning, diagnostics, and maintenance

●Exchange the detector without resetting the parameters

●Exchange the detector without a ladder at heights up to 8 m

Ecological benefits

●Environmentally friendly processing

●Reusable materials

●Electronic parts and synthetic materials can be easily separated

●Environmentally friendly detector-testing without gas

Use

Multi-sensor fire detector FDOOT241-9

●Point detector with additional heat sensors

●Optional detector dust cap to protect the point detector during the

construction phase

Function

●Functions according to the scattered light principle with two sensors: Optical

forward and backward scattering

●Opto-electronic measuring chamber: Obstructs disruptive extraneous light

but can be relied upon to detect both light and dark smoke particles

●Two additional heat sensors increase the fire detector's immunity to

deceptive phenomena.

●Can be set as a multi-sensor smoke detector, smoke detector, or heat

detector by the software

●Selectable detection behavior thanks to application-specific ASA parameter

sets

●Multi-protocol: Collective / GMT (Cerberus / Siemens) / SynoLINE300,

FDnet

Use

●For early detection of flaming fires of solid and liquid substances as well as

of smoldering fires

●For early and reliable fire detection in an environment with deceptive

phenomena

●Can be used addressed, for the gradual modernization of:

Collective/GMT/SynoLINE300 on Sinteso FDnet ¹

¹ FS20 compatibility in FDnet is assured subject to in-country FS20 software support.

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Multi-sensor fire detector FDOOT241-A

●Point detector with additional heat sensors

●Optional detector dust cap to protect the point detector during the

construction phase

Function

●Functions according to the scattered light principle with two sensors: Optical

forward and backward scattering

●Opto-electronic measuring chamber: Obstructs disruptive extraneous light

but can be relied upon to detect both light and dark smoke particles

●Two additional heat sensors increase the fire detector's immunity to

deceptive phenomena.

●Can be set as a multi-sensor smoke detector, smoke detector, or heat

detector by the software

●Selectable detection behavior thanks to application-specific ASA parameter

sets

Use

●For early detection of flaming fires of solid and liquid substances as well as

of smoldering fires

●For early and reliable fire detection in an environment with deceptive

phenomena

●Can be used addressed

Smoke detector FDO241

●Optional detector dust cap to protect the point detector during the

construction phase

Function

●Functions according to the scattered light principle with one sensor: Optical

forward scattering

●Opto-electronic measuring chamber: Obstructs disruptive extraneous light

but can be relied upon to detect both light and dark smoke particles

●Selectable detection behavior thanks to application-specific ASA parameter

sets

Use

●For early detection of flaming fires as well as smoldering fires

●Can be used addressed

Heat detector FDT241

●Optional detector dust cap to protect the point detector during the

construction phase

Function

●Two heat sensors prevent the total failure of the thermal detection capacity

of in the event of a fault affecting a sensor.

●Measures the operating temperature and the temperature inside the

detector housing so that temperature rise can be detected.

●Selectable detection behavior thanks to application-specific ASA parameter

sets

Use

●For monitoring rooms in which rapid temperature rise is to be expected in

the event of a fire or if optical detection is difficult

●Can be used addressed

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Dummy detector FDX291

Use

●To cover bases that are left empty for prolonged periods of time

Type Overview

Type Designation Order no. Weight [kg]

Point detector

FDOOT241-9 Multi-sensor smoke detector A5Q00004813 0.106

FDOOT241-A Multi-sensor smoke detector S54310-F13-A1 0.106

FDO241 Smoke detector A5Q00004811 0.103

FDT241 Heat detector A5Q00004812 0.086

Base adapter

FDB241 Base adapter Sinteso (SIGMA/A+) S54319-F13-A1 0.086

FDB251 Base adapter Sinteso (Interactive) S54319-F28-A1 0.090

FDB281 Base adapter MS8/PMT A5Q00004929 0.125

FDB299 Base adapter Sinteso (AlgoRex coll.) S54319-F14-A1 0.086

Other accessories

FDUD290 Removal tool for adapter S54370-S13-A1 0.098

FDX291 Dummy detector S54319-F2-A1 0.120

FDOOT241-9M Migration kit A5Q00015955 0.140

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Accessories

You will find more information about detector bases and accessories in document 007775.

Addressable detector base FDB221 / FDB221-AA

Function:

●Detector base with stilts for fire detectors with addressable signal processing

●'Orange' connection terminals, 0.2…1.5 mm2conductor cross-section

●FDB221-AA also contains micro terminal DBZ1190-AA

Use:

●For recess-mounted cable entry

●For surface-mounted cable entry up to a cable diameter of 6 mm

Flat, addressable detector base FDB222

Function:

●Flat detector base for fire detectors with addressable signal processing

●'Orange' connection terminals, 0.2…1.5 mm2conductor cross-section

Use:

●For flush mounting; only for recess-mounted cable entry

Base attachment FDB291

Function:

●For routing surface-mounted cables larger than Ø 6 mm

●Detector base is secured with a snap fastener

Base attachment humid FDB293

●For achieving a higher protection category

●For mounting in wet or humid environments

●Required when using detector heating unit FDBH291

●Required when using protective cage DBZ1194 or EMC-protective cage

FDBZ294

●Mounted between detector base and ceiling

●Detector base mounted quickly: The detector base simply clicks into place in

base attachment humid FDB293.

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Base attachment wet FDB295

●Base attachment wet with additional integrated rubber seal for mounting in wet

or humid environments

●For achieving a higher protection category

●For mounting in wet or humid environments

●Required when using detector heating unit FDBH291

●Required when using protective cage DBZ1194

●Mounted between detector base and ceiling

●Detector base mounted quickly: The detector base simply clicks into place in

base attachment wet FDB295.

Sealing element FDBZ295

Function:

●For improving the protection category. However, detectors can no longer be

installed or removed using the detector exchanger.

Note: Cannot be used in conjunction with designation plate FDBZ291!

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Installation

Easy, time-saving, and completely reliable mounting

●Detector base FDB221 for surface-mounted and recess-mounted supply lines

●Detector base FDB222 for flush mounting, only for recess-mounted supply lines

●Extra-long mounting slits allow existing drill holes from other systems to be reused.

●A large opening in the detector base makes it easy to feed the cables through

●Screwless connection terminals (spring clip principle)

●Detector line can be connected without any tools. The wire can be inserted easily by

hand.

●The detector can be mounted in the base easily by hand or using a detector exchanger

●The alarm indicator (AI) is centered in the detector, which means there is no need to

align the detector

1 Mounting slit 4 Alarm indicator

2 Screwless connection terminals 5 Opening for cable entry

3 Detector base

You will find more information in document 007775.

Disposal

The device is considered an electronic device for disposal in accordance

with the European Guidelines and may not be disposed of as domestic

garbage.

●Dispose of the device through channels provided for this purpose.

●Comply with all local and currently applicable laws and regulations.

●Dispose of empty batteries in designated collection points.

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Technical data

FDOOT241-9 FDOOT241-A FDO241 FDT241

Operating voltage (modulated) DC 12…33 V

Operating current (quiescent) 65…230 μA 180…230 μA 130…200 μA

External alarm

indicators (EAI)

which can be

connected

Without sounder

base

With sounder

base

Communication protocol FD20 or collective FDnet

System compatibility

FS20¹, AlgoRex, SIGMASYS

CZ10, CS11,

BC10, FC10,

XC10, FC330A,

FC700A, BMS,

SM80/88D100

–

Operating temperature -25…+70 °C -35…+70 °C -25…+70 °C -25…+50 °C /

-25…+65 °C /

Depending on parameter settings

Storage temperature -30…+75 °C -35…+75 °C -30…+75 °C

Air humidity ≤95 % rel.

Color ~RAL 9010 pure white

Protection

category

(IEC 60529)

With detector

base FDB221/-

AA, FDB222,

FDB291

IP43

Base FDB221

and sealing

element

FDBZ295 IP44

Base attachment

humid FDB293

or base

attachment wet

FDB295

Standards

CEA 4021, EN 54-5 – EN 54-5

EN 54-17

EN 54-7 –

– EN 54-27 – –

Approvals:

●VdS

●LPCB

●FM

●DNV GL (Marine)

G204007

126bh/01

3029351

–

G215052

–

G204017

126bf/02

3029351

MEDB00003UK

G204019

126bj/02

3046115

MEDB00003UR

Permissible wind speed 1…20 m/s –

¹ FS20 compatibility in FDnet is assured subject to in-country FS20 software support.

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Dimensional drawing

100

With base FDB221 for surface-mounted cable

entry

With base FDB222 for flush mounting

Product documentation

Document ID Title

007004 Technical manual Automatic fire detectors FDOOT221, FDOOT241-A3, FDOOT241-

A4, FDOOT241-A5, FDOOT241-8, FDOOT241-9, FDOOT241-A9, FDO241, FDO221,

FDT241, FDT221

007775 Data Sheet Detector bases and accessories FDB22x, FDB20x, FDB241, FDB251,

FDB281, FDB299

008164 Equipment overview Sinteso™ Detector system FD20

008331 List of compatibility (for 'Sinteso™' product line)

009409 Data sheet Colored detectors, bases and base attachment FDO.., FDOOT…, FDT…,

FDB…, FDCW241

Related documents such as the environmental declarations, CE declarations, etc., can be

downloaded from the following Internet address:

https://siemens.com/bt/download

Building Technologies

007005_ad_en_

Fire Safety 2019-01-22

Issued by

Siemens Switzerland Ltd

Building Technologies Division

International Headquarters

Theilerstrasse 1a

CH-6300 Zug

Tel. +41 58 724 2424

www.siemens.com/buildingtechnologies

Technical specifications and availability subject to change without notice.

Document ID 007005_ad_en_-- FD20

Edition 2019-01-22

0786

Siemens Schweiz AG, Theilerstrasse 1a

CH-6300 Zug

Technical data: see doc.

007004

The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC),

which is obtainable via the Customer Support center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download

FDOOT241-9 - Smoke/heat detector incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.

305/2011/EU (CPR): EN 54-5 / EN 54-7 / EN 54-17; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581

DoP No.: 0786-CPR-20007; DoC No.: CED-FDOOT241-9

FDOOT241-9

0786

Siemens Schweiz AG, Theilerstrasse 1a

CH-6300 Zug

Technical data: see doc.

007004

The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC),

which is obtainable via the Customer Support center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download

FDOOT241-A - Smoke/heat detector for use in fire detection and fire alarm systems installed in buildings.

305/2011/EU (CPR): EN 54-5 / EN 54-7 / EN 54-17; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581

DoP No.: 0786-CPR-21451; DoC No.: CED-FDOOT241-A

FDOOT241-A

Siemens Schweiz AG; Theilerstrasse 1a

CH-6300 Zug

Technical data: see doc.

007004

FDO241 - Point type smoke detector incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.

305/2011/EU (CPR): EN 54-7 / EN 54-17 ; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581

The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC), which is

obtainable via the Customer Support Center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download

DoP No.: 0786-CPR-20002; DoC No.: CED-FDO241

0786

FDO241

Siemens Schweiz AG; Theilerstrasse 1a

CH-6300 Zug

Technical data: see doc.

007004

FDT241 - Point type heat detector incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.

305/2011/EU (CPR): EN 54-5 / EN 54-17 ; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581

The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC), which is

obtainable via the Customer Support Center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download

DoP No.: 0786-CPR-20004; DoC No.: CED-FDT241

0786

FDT241

Other manuals for FDOOT241-9

This manual suits for next models

Table of contents

Other Siemens Fire Alarm manuals

Siemens

Siemens FDM365-RP User manual

Siemens

Siemens SSD-C User manual

Siemens

Siemens FS720 Series Operating instructions

Siemens

Siemens FDOOT221 User manual

Siemens

Siemens FDM275-O User manual

Siemens

Siemens FireSeeker FS-250 User manual

Siemens

Siemens FDCW221 User manual

Siemens

Siemens FC901 User guide

Siemens

Siemens FCM2041-U3 User manual

Siemens

Siemens FDOOT271-O User manual

Siemens

Siemens Cerberus PRO FS720 User manual

Siemens

Siemens DM1132 User manual

Siemens

Siemens FC2005 Owner's manual

Siemens

Siemens FT2040 Instruction Manual

Siemens

Siemens DBS721 User manual

Siemens

Siemens MH-5 Series Service manual

Siemens

Siemens FS720 Series Guide

Siemens

Siemens CZM-4 User manual

Siemens

Siemens AnalogPLUS DB1131A User manual

Siemens

Siemens HMS-SZ User manual

Siemens

Siemens Synova FC330A User manual

Siemens

Siemens FP-11 FirePrint Reference manual

Siemens

Siemens FC700A Technical manual

Siemens

Siemens FC700A Guide

Popular Fire Alarm manuals by other brands

Zeta Alarm Systems

Zeta Alarm Systems INFINITY ID2 installation manual

System Sensor

System Sensor 22051TLE-RF-26 Installation and maintenance instructions

Pittway

Pittway Notifier AM2020 troubleshooting guide

Ampac

Ampac ZoneSense user manual

Kidde

Kidde VM-1 Technical reference manual

LST

LST SIM016-3 Specification sheet

Fireboy- Xintex

Fireboy- Xintex FBD-MZ Owner's Manual & Installation Instructions

bolid

bolid S2000-IP-03 instruction manual

GST

GST DI-9204 Installation

E2S

E2S BExTBG05D instruction manual

Notifier

Notifier UZC-256 installation manual

Fire-Lite Alarms

Fire-Lite Alarms MS-2 instructions

hyfire

hyfire HY5000 Series install guide

FlameStop

FlameStop PFSIFP8 Installation and operation manual

Radionics

Radionics Radionics 9124 user guide

UniPOS

UniPOS FD 7120 instruction manual

FIREWOLF

FIREWOLF FW-C01224 owner's manual

Ziton

Ziton ZP787-3 Installation sheet