Siemens PXC00-PE96.A User manual

Installation Instructions

Document No. 565-719

July 22, 2016

Andover Infinet Driver for PXC Modular

Item Number 565-719, Rev. BA Page 1 of 2

These installation instructions only cover the

connection of the Andover Inﬁnet Driver to the

Andover Infinet network. For hardware installation of

the PXC Modular Controller, see PXC Modular

Series Installation and Quick Start (553-638).

Product Description

The Andover Infinet Driver enables communication

between the APOGEE®Automation System and the

Andover Infinet/Infinet II devices.This is done by

removing the Andover CX Network Controller and

replacing it with the Andover Infinet Driver, allowing

the Driver to control the Andover Infinet network.

Product Numbers

PXC00-PE96.A

PXC Modular RS-485 or

Ethernet ALN, 96 FLN nodes

PXC100-PE96.A

PXC Modular RS-485 or

Ethernet ALN, TX-I/O

Support, 96 FLN nodes

PXX-485.3

Expansion Module, three RS-

485 FLN connections

LSM-INT-ANDVRINET

PXC Modular Andover Driver

License

Warning/Caution Notations

WARNING:

Personal injury/loss of life may

occur if you do not follow the

procedures as specified.

CAUTION:

Equipment damage, or loss of

data may occur if you do not

follow the procedures as

specified.

Required Tools

Flat-blade screwdriver (1/8-inch blade

width).

Wire strippers.

CAUTION:

Always wear an electro-static discharge wrist

strap and discharge accumulated static before

touching field panel components.

Expected Installation Time

30 minutes

Prerequisites

Driver hardware is installed according to its

respective installation instructions.

FLN Expansion Module is installed

according to its respective installation

instructions.

Depending on the type of installation, other

prerequisites may have to be completed.

Document No. 565-719

Installation Instructions

July 22, 2016

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as

design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry, Inc. Other product or company

Siemens Industry, Inc.

Building Technologies Division

1000 Deerfield Parkway

Buffalo Grove, IL 60089-4513

USA

Tel: + 847-215-1000

Your feedback is important to us. If you have

comments about this document, please send

them to SBT_technical.editor@siemens.com

Document No. 565-719

Printed in the USA

Page 2 of 2

Connecting the Andover Infinet

Driver to the Andover Infinet

Network

Follow these steps to connect the Andover Infinet

Driver to the Andover Infinet network:

1. Disconnect the Andover Infinet network field

bus from the Andover CX Network Controller.

2. Connect the Andover Infinet network field bus

to the FLN1 of the RS-485 Expansion Module

on the Andover Driver per the diagram in Figure

Figure 1. Connecting the Andover Infinet Driver to the Andover Infinet Network.

The installation is now complete.

This manual suits for next models

Other Siemens DC Drive manuals

Siemens

Siemens SINAMICS PERFECT HARMONY GH180 User manual

Siemens

Siemens SINAMICS SM150 User manual

Siemens

Siemens 3VA9 Series User manual

Siemens

Siemens MICRO MASTER Junior User manual

Siemens

Siemens Sinamics GM150 6SL3835-2LN44-2AA0 User manual

Siemens

Siemens SINAMICS DCM User manual

Siemens

Siemens SINAMICS G130 User manual

Siemens

Siemens SED2 Series User guide

Siemens

Siemens SINAMICS PERFECT HARMONY GH180 User manual

Siemens

Siemens SINAMICS S120 Parts list manual

Siemens

Siemens MICROMASTER 420 User manual

Siemens

Siemens Micromaster Eco User manual

Siemens

Siemens 3VF 9 323-1 0 Series User manual

Siemens

Siemens SINAMICS SM150 User manual

Siemens

Siemens SED2 Series Quick start guide

Siemens

Siemens SIMATIC FM 453 User manual

Siemens

Siemens SINAMICS SL150 6SL39616RC100AA02 Operating instructions

Siemens

Siemens SINAMICS PERFECT HARMONY GH180 Parts list manual

Siemens

Siemens SIDOOR ATE500E User guide

Siemens

Siemens SINAMICS PERFECT HARMONY GH150 User manual

Siemens

Siemens SINAMICS SL150 User manual

Siemens

Siemens SINAMICS S120 Quick start guide

Siemens

Siemens 6SL3845-2NN41-8AD2 User manual

Siemens

Siemens SINAMICS Series Parts list manual

Popular DC Drive manuals by other brands

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS user manual

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Technical description

Chamberlain Garog

Chamberlain Garog D Series operating manual

Parker

Parker PDS Series user guide

Festo

Festo DGC G Series Repair instructions

Binks

Binks QS-5012-1-CE Service manual

Danfoss

Danfoss VLT 2800 Series Quick setup

ABB

ABB ACQ580-01 Series Quick installation and start-up guide

YASKAWA

YASKAWA CANopen SI-S3 Technical manual

GE D20A6 instructions

Unex

Unex MC-D-250-1000-050W-TW operating manual

Geckodrive

Geckodrive G213V manual

ABB

ABB RSYC-01 user manual

Rockwell Automation

Rockwell Automation PowerFlex 700S Programming manual

WEG

WEG DeviceNet CFW500 user manual

SOMFY

SOMFY JR RU 30 instructions

Beckhoff

Beckhoff AX8911 Documentation

Minarik

Minarik MM300 Series user manual