Siemens Simatic VS 710 User manual
SIMATIC
VS 710
Quick Reference Guide
A5E00032597-02
Edition 11/2001
The reproduction, transmission or use of this document or its
contentsis not permitted without express written authority. Offenders
will be liable for damages. All rights, including rights created by patent
grant or registration of a utility model or design, are reserved.
We have checked the contents of this manual for agreement with the
hardwareand software described. Since deviations cannot be en-
tirely ruled out, we cannot guarantee full agreement. However, the
datain this Quick Reference Guide are reviewed regularly and any
necessary corrections included in subseqeuent editions. Sugges-
tions for improvement are welcome.
Technical data subject to change.
Disclaimer of Liability
Copyright W Siemens AG 1999-2001 All Rights Reserved
Siemens Aktiengesellschaft
A5E00032597
Printed in the Fed. Rep. of Germany
SIMATIC VS710Contents
SIMATIC VS 710
A5E00032597-02 iii
Contents
1 Product Overview 1. . . . . . . . . . . . . . . . . . . . . . . .
1.1 Applications 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Contents of the Consignment 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
VS 710 Package 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VS 710 OEM Package: 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 Accessories 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 VS 710 Hardware 4. . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Hardware Components 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Mounting the VS 710 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions, Mounting Fixtures 6. . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting Bracket 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lens Socket 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Hardware Interfaces 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4 Power Supply - Connector Pinout 10. . . . . . . . . . . . . . . . . . . . . . . .
24 VDC Power Supply 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5 Digital Input / Output - Connector Pinout 12. . . . . . . . . . . . . . . . . .
Wiring Diagram (Digital Input Points) 13. . . . . . . . . . . . . . . . . . . . .
Wiring Diagram (Digital Output Points) 14. . . . . . . . . . . . . . . . . . .
2.6 DP Connector Pinout 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.7 VGA Connector Pinout 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.8 RS232 Connector Pinout 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.9 IDE Flashdisk 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Connecting the VS 710 19. . . . . . . . . . . . . . . . . . . . .
3.1 Safety Recommendations 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 System Environment 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3 Connection Options 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Function in Configure Mode 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Function in Productive Mode 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .
SIMATIC VS710 Contents
iv SIMATIC VS 710
A5E00032597-02
4 Interactive Operation 22. . . . . . . . . . . . . . . . . . . . .
4.1 Keyboard and Floppy Emulation 22. . . . . . . . . . . . . . . . . . . . . . . . .
4.2 HOSTKEY Program 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup Options 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operator Input to HOSTKEY 23. . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3 Operating DOS 6.22 and SETUP 24. . . . . . . . . . . . . . . . . . . . . . . . .
4.4 Installing older ProVision versions on Your VS 710 25. . . . . . . . . .
5 Technical Specifications 26. . . . . . . . . . . . . . . . . . .
5.1 General Specifications 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2 Digital I/O Interface 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Certification 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1 Certification for the USA and Canada 31. . . . . . . . . . . . . . . . . . . . .
UL/CSA Certification 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FM Approval 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2 Certification for Europe 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EMC Guidelines 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Declaration of Conformity 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Observing the Setup Guidelines 33. . . . . . . . . . . . . . . . . . . . . . . . . .
SIMATIC VS710Quick Reference Guide
SIMATIC VS 710
A5E00032597-02 1
1 Product Overview
SIMATIC VS 710 is a highly compact stand-alone image processing
system in which the camera, computer, and peripherals are integrated in a
single unit.
SIMATIC VS 710 has the following advantages to offer users who require
an all-in-one image processing system for inspection, monitoring of
production, and parts identification:
•Top-quality image representation and resolution for static and moving
images
•High clock speed for networked decentralized automation solutions
•Continuous remote parts inspection
•Video image can be shown on SVGA monitors
•Digital I/O to programmable controller
•PROFIBUS DP slave functionality with a transmission speed of up to
12 Mbps
•Can be configured by host PC via a serial port or PROFIBUS DP
•Flexible configuration to accommodate new inspection criteria
•ProVision system software is easy to configure, user-friendly and also
offers complete functionality for inspection and recognition
applications.
SIMATIC VS710 Quick Reference Guide
2SIMATIC VS 710
A5E00032597-02
1.1 Applications
SIMATIC VS 710 is suitable for use in all areas, including the electrical,
engineering, electronics, automobile, pharmaceuticals, cosmetics, food, and
packaging industries. The system has a wide range of applications in
product monitoring, quality control, and parts identification.
1.2 Contents of the Consignment
VS 710 is available in two versions. The versions differ only in what is
included along with the basic product.
VS 710 OEM VS 710
6GF1710-2AA 6GF1710-3AA
Configurable using customized
C/C++ programs Configurable using ProVision
6GF8007-1AA0 software package
and higher
VS 710 Package
•VS 710 basic unit with ProVision-run-time software
•Tool diskette 1 with MS-DOS 6.22 1)
•Standard software licence agreement
•Mounting bracket and two M4 fixing screws
•2 Ferrite sleeves
•This hardware manual
•Product Information bulletin
VS 710 OEM Package:
•VS 710 OEM basic unit
•Tool diskette 1 with MS-DOS 6.2.2 1)
•Standard software licence agreement
•2 Ferrite sleeves
•Product Information bulletin
1) The package does not include a complete DOS version.
SIMATIC VS710Quick Reference Guide
SIMATIC VS 710
A5E00032597-02 3
1.3 Accessories
Accessory Order Number
RS232 cable (zero
modem cable) 6ES7901-1BF00-0XA0
Power supply cable 6GF9002-1CA
Digital I/O cable 6GF9002-1CB
DP cable (PROFIBUS
line) 6XV1830-0EH10
PROFIBUS connector 6ES7972-0BA40-0XA0 (without PG socket)
6ES7972-0BB40-0XA0 (with PG socket)
Note
The accessories listed in the above table are not supplied with the device
and must be ordered separately.
Standard accessories are listed in catalog ST70 and ST50.
SIMATIC VS710 Quick Reference Guide
4SIMATIC VS 710
A5E00032597-02
2 VS 710 Hardware
2.1 Hardware Components
VS 710 is made up of the following hardware components:
•Metal casing (dimensions: 65x80x130, color: black) with multiple
mounting options. All ports for communication located on the back
panel of the casing.
•C-mount standard lens socket.
•High-resolution CCD chip (782x582) with square pixels, pixel
identical scanning, offset setting.
used CCD-Chip size: 6.5 mm (H) x 4.8 mm (V)
•Restart-reset, full frame shutter with an exposure range of 1/50 -
1/10000s, half-image and full-image modes.
•Parameter assignment for image formats up to 768x512.
•100 MHz 80486 CPU (AMD) with direct image buffer access
•16 Mbyte main memory DRAM module (SO-DIMM)
•16 Mbyte IDE flashdisk (see Section 2.9)
•256 Kbyte flash EPROM as BIOS memory
•2 Mbyte image buffer
SIMATIC VS710Quick Reference Guide
SIMATIC VS 710
A5E00032597-02 5
2.2 Mounting the VS 710
The VS 710 can be mounted in many different ways, making it highly
versatile and convenient to use.
A number of fixtures (1/4” support socket, M4 screw threads) for mounting
attachments are located on the underside of the metal casing.
Choose whichever mounting option best suits your needs:
•Directly onto the casing using the M4 screw threads
•To the support socket on the casing
•Using the mounting bracket supplied (not included in the VS 710 OEM
package)
Mounting bracket
M4 screw threads
1/4” support socket
Figure 1 Mounting Fixtures on the VS 710
SIMATIC VS710 Quick Reference Guide
6SIMATIC VS 710
A5E00032597-02
Dimensions, Mounting Fixtures
The dimensions are dependent on the type of mounting (with or without a
mounting bracket attached).
31
13.5 16.5
65
5
16.5
10
131.5
143
1.5
120
screw threads
on 3 sides
depth: 8mm
148
21.5
22.5
12.5
12.5
80.6
58
M4
M4
M4
American
coarse thread
1/4” 20 UNC
depth: 8mm
depth: 6mm
depth: 8mm
depth: 8mm
no mating connector
lens starts here
M4 8 mm deep
Figure 2 Dimensions with No Mounting Bracket Attached
Table of contents
Other Siemens Computer Hardware manuals
Siemens
Siemens SIMATIC S7-300 CPU Data: CPU 315-T-2 DP User manual
Siemens
Siemens XMS-SP User manual
Siemens
Siemens SIMATIC PG 760 Manual
Siemens
Siemens CP 343-5 User manual
Siemens
Siemens Gigaset USB adapter 54 User manual
Siemens
Siemens CP 443-1 User manual
Siemens
Siemens SIMATIC NET CP 5512 User manual
Siemens
Siemens DP/AS-Interface Link 20E User manual
Siemens
Siemens SIMATIC S7-1200 CP 1243-8 IRC User manual
Siemens
Siemens EB1 User manual
Siemens
Siemens SIMEAS-Hub 7KE6000-8AD /CC User manual
Siemens
Siemens SIMATIC CP 341 User manual
Siemens
Siemens SIMATIC NET CP 443-1 Advanced User manual
Siemens
Siemens SIMATIC S7-1200 User manual
Siemens
Siemens SENTRON PROFIBUS DPV1 Series User manual
Siemens
Siemens SMN42 User manual
Siemens
Siemens CP 342-5 User manual
Siemens
Siemens PAD-5 Series User manual
Siemens
Siemens TC65 User manual
Siemens
Siemens Simatic S7-300 Instruction manual
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Panasonic
Panasonic DV0PM20105 Operation manual
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
