SICK DIM320 User manual
QUICK START GUIDE
DIM320 Handheld Dimensioner
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
28023428/2018-08-20 SICK
1.1 DIM320 Kit
1 Equipment
Equipment 1
1. Transport and carry case
2. Tablet PC along with charger
3. Freestyle sensor
4. Calibration plate
5. USB card reader
6. Micro SD with calibration plate
data
7. Optical cleaning kit
1.2 DIM320 Kit
1. Start/Stop button and Status LED
lights
2. USB cable and plug
3. Infrared cameras
4. Color camera and LED ash unit
5. Infrared projector with class 1
laser
3
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
8023428/2018-08-20 SICK
1.3 DIM320 Kit
Equipment 1
On connecting Freestyle with the tablet PC, status lights will
turn on in the Start/Stop button. They indicate the following
statuses:
Status LED Color Description
Initializing Scanner Red Scanner plugged in and software
starting up.
Acquiring Tracking Blinking Blue Scanner needs to acquire tracking.
Point at the object and hold it
steady until tracking is acquired.
Scanning Blinking Blue Tracking is acquired and point
data is displayed.
Lost Tracking Red Scanner loses tracking when
moved too fast. Hold it steady
pointed at object.
Tracking Acquired Blinking Blue Scanner reacquires tracking.
Scan Complete Same as at the end
of previous scan
Ready to scan.
Not Ready to Scan Same as at the end
of previous scan
Start button pressed before scan
is closed out.
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
48023428/2018-08-20 SICK
Start DIM320 Creator software on the tablet PC:
▸ If required, log in using default password in the tablet PC: sicksick
▸ Double click DIM320 software icon on the desktop
2 DIM320 Creator Software
DIM320 Creator Software 2
2.1 Capture Point Cloud
Prerequisites:
▸ Freestyle sensor connected with the tablet PC.
▸ Status on bottom left of tablet PC states “Ready to Scan”.
Click (press and release) Freestyle button to start a new scan.
Refer to the image on the next page. The left part of the screen will dis-
play point cloud as it is captured and the right side displays the video.
Initial few scans are changed to red color points, which in the overall
point cloud appear as a red dot as shown in the next image. With some
training, an operator can point the sensor precisely to the object to be
dimensioned using this red dot, which helps the system identify which
object to process.
Note that the point cloud viewer on the left can be rotated as desired
using nger swiping to inspect the object just captured.
5
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
8023428/2018-08-20 SICK
2.2 Capture Barcode
DIM320 Creator Software 2
On clicking “+ Add New” under the barcode section of Creator screen,
the following screen displays the barcode capture screen.
Clicking “Capture” produces more options including “Recapture” and
“Done”. Automatic attempt is made to decode the captured pictures
of all barcodes. Clicking red X will remove a decoded barcode. Clicking
“Done” saves the barcode.
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
68023428/2018-08-20 SICK
DIM320 Creator Software 2
Clicking an already captured image of barcode on the Creator screen
brings up barcode view/delete screen. This screen allows viewing and
deleting each barcode.
7
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
8023428/2018-08-20 SICK
DIM320 Creator Software 2
2.3 Capture Image
On clicking “+ Add New” under Photos section of Creator screen, the fol-
lowing screen displays the image capture. Clicking “Capture” will capture
the image and provide more options including “Recapture” and “Done”.
Clicking “Done” will go back to Creator screen. Clicking an already cap-
tured image will provide options to view and delete.
After capturing barcode and images, the main Creator screen will display
all captured data.
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
88023428/2018-08-20 SICK
DIM320 Creator Software 2
At this point, clicking the point cloud window will bring up the point cloud
viewer, which allows operations such as rotating and zooming in/out.
2.4 Library Screen
Library stores history of scans and allows operations such as Edit, De-
lete and Send.
9
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
8023428/2018-08-20 SICK
DIM320 Creator Software 2
The following screen shows operations available on selecting a single
scan.
The following screen shows operations available on selecting multiple
scans.
QUICK START GUIDE | DIM320 Handheld Dimensioner
Subject to change without notice
10 8023428/2018-08-20 SICK
On-Site Calibration 3
3 On-Site Calibration
DIM320 is calibrated before delivery. The calibration may have been
affected under certain transport conditions. If so, recalibrate it so that
it is ready to capture accurately. The best time to recalibrate DIM320 is
on-site, preferably daily right before starting to capture.
DIM320 is shipped with Calibrate software installed on the tablet PC.
Double click on icon on the home screen to start calibration. Ensure
DIM320 software itself is not running before starting to calibrate as only
one software can connect to the Freestyle sensor at one time.
Each DIM320 kit includes a calibration plate and a corresponding cali-
bration le, which can be found on the micro SD card that is contained
in the transport and carry case.
Please refer to the operating manual for more details on calibration
procedure.
Table of contents
Other SICK GPS manuals
