Showven SPARKULAR JET User manual

USER MANUAL

SPARKULAR®JET

V3.1

2022/05/17

Showven Technologies Co., Ltd.

Thanks for choosing SPARKULAR®JET, we wish it will sparks up your show.

Please read the following manual carefully before operating this product.

ΔSafety Instructions

\Unauthorized repair are prohibited, it may cause serious incident.

\SPARKULAR®JET can be used in rain, but after use please clean it, and store it at dry environment.

\Make sure lid of feeding hopper are well covered when use SPARKULAR®JET.

\Accidentally burning of consumable can only use sands to extinguish.

\Consumable should keep away from moisture and stored in a dry sealed environment.

\Check whether there is consumable aggregate in the output nozzle both before and after each

show, if any, please clean it up, or it will affect the firing effect or even damage SPARKULAR®JET.

\Please be noted that there may sparks or remains fall to the ground. Make sure there is no

flammable objects such as carpet on the ground with a radius of 3m close to the machine.

\Maximum cascade of SPARKULAR®JET is 6 units (BT91) / 3 units (BT92) with a standard power cable.

Exceed connecting may result in damage or even cause fire.

\For better heat dissipation, block the air intake and air outlet is prohibited.

\Cover the output nozzle of SPARKULAR®JET is forbidden, inspect the machine before each show,

making sure no objects or material will block the output nozzle.

\Never touch the nozzle of SPARKULAR®JET, danger of getting burnt

\Never touch the sparks which shooting out from the nozzle

\Ensure that children, animals and unauthorized persons don’t have access to the SPARKULAR®JET.

\Keep audience animals or flammable material at a minimum distance of 3m from SPARKULAR®JET.

\Make sure sparks shoot out from SPARKULAR®JET can NOT touch any objects. And keep a safety

zone with minimum 2m from the maximum effect height.

ΔDescription

SPARKULAR®JET is another brand new effect originally invented by SHOWVEN®. It generates

a flashing SPARKULAR®effect up to 10m. Built-in automatic air compressor, no external

pressure tank needed, makes it easier for setup and fewer usage restrictions. It is perfect

effects solution for stadium, concerts etc. medium to large events.

ΔTechnical Specifications

\Model: BT91 / BT92

\Dimension: 320 280 300mm

\Weight: 16.5kg

\Housing material: 304 Stainless steel

\Input: AC 100V-120V,50/60Hz, Max.cascade:3PCS

AC 200V-240V,50/60Hz, Max.cascade:6PCS

\Work power: 350W

\Work Temp.: -10 ~50

\Effect height: HC8200 LARGE(8-10m) / HC8200 MEDIUM(6-8m) / SMALL(4-5m)

\Hopper capacity: 450g

\Trigger delay: 0.6-1s

\HC8200 consumption: HC8200 LARGE/MEDIUM 10-15g/shot; HC8200 SMALL 4-6g/shot

\Interface: 3-pin and 5-pin DMX IN/OUT, NEUTRIK POWERCON TURE 1

\Control: Standard DMX 2 Channels

ΔStructure of SPRKULAR®JET

1. Extension Tube

2. Feeding Hopper

3. LCD screen

4. Safety Loop

5. Power Switch

6. Fuse

7. 5-PIN DMX IN

8. 5-PIN DMX OUT

9. 3-PIN DMX IN

10. 3-PIN DMX OUT

11. POWER IN

12. POWER OUT

Diagram of Bottom Panel

ΔOperation Panel

1. LED display area

READY DMX FAU LT HE AT

READY: Green light flashing means heating up. Turns from flashing into long on, indicates that

the machine is ready to work

DMX: Flashing shows that DMX signal is connected, light OFF means there is no DMX signal

FAULT: Light ON when error occurs

HEAT: Light ON when system is heating up

2. Control button area

MENU DOWN UP ENTER

MENU: Press to switch through menu, press and hold for 3s enter advanced menu

DOWN: Parameter down

UP: Parameter up

ENTER: Confirm and save parameters

3. RFID area

Composite Ti with RFID card, swiping cards used to identify parameters and types of granules.

The RFID card is disposable, one card can only use one time.

ΔInterface

1. Main Interface:

DMX: 11 P: 0

T: 19 Delay: 1.0s

First Line: DMX: DMX address P: pressure value

Second Line: T: inner core temp. Delay: firing trigger delay

The working principle of the machine is when the firing is triggered, it takes some time (jet

delay) for the system to transfer and stimulate the consumables. When it reached the firing

trigger delay time, the valve will open automatically and firing.

2. Error information

Error information

Explanation

E0 System IC

1. Emergency stop was executed when firing was triggered, and firing

stops. E0 disappear automatically 1min later

2. Too frequent firing in a short period of time, E0 disappear 100s later

E1 Pump Protect

It happens when continuous pressurization fail, probably the pump

broken

E2 Temp. Sensor

Temperature sensor is not connected or damage

E3 P Temp. Over

Chassis over-temperature

E4 Time Remain

Activated time for machine is not enough, need to swiping RFID card

E5 K Temp. Over

Heating chamber over-temperature

E6 Heat Fail

Heating fail, if recover automatically, please pay attention to the power

supply

3. Setting Menu

Press “MENU”switch through setup menu.

4. Advanced Menu:

Press “MENU”switch through setup menu.

*Please don't change default value without engineer's suggestion from SHOWVEN®

Options

Range

Default

Explanation

Set DMX

Address

1-512

Set DMX address. Each machine occupy two

DMX channels. If controlled by Host Controller,

please assign a unique address for each machine

Material

Select

Large/Medium/Small

Large

Please select based on the consumable you use

Manual Clear

On/Off

OFF

Clear material manually. Please be careful, do

NOT close to the nozzle.

Options

Range

Default

Explanation

Set

Temperature

480-620

580

Set inner core temp

Auto Heat

On/Off

ON: machine will heating up and pressurize

automatically when power on machine

OFF: Need to manually turn on heating up and

pressurize on DMX console

Mode

Selection

Factory

Mode/ User

Mode

User Mode

Factory mode is for engineer only. When in Factory

mode machine can’t controlled by DMX console/host

controller

Standby Switch

On/Off

OFF

Standby function. When ON, the machine can firing

only when heating up was finished

Ext. Ignite

On/Off

OFF

When use fireworks firing system to firing the

machine. Customized design for fireworks customer

Feeding Test

On/Off

Test the feeding structure and feeding motor

Fan Test

On/Off

Test the blowing fan

Tip Over Error

ON/OFF

OFF

Tilt function switch

5. DMX Control

SPARKULAR®JET occupy 2 channels.

First channel

Function

0-111

Firing OFF

112-255

Firing. To avoid false triggering, trigger time should maintain above 0.2s.

Second channel

Function

60-80

Clear material, the valve will open when clear material, and clear the

consumable remains in the heating chamber. DO remember to clear

material after each show.

20-40

Emergency stop, when firing was triggered, operator can stop the firing

during this jet delay period. And machine will prompt E0 error

0-10

Pre-heat OFF and auto pressurize OFF (disabled when auto-heat ON)

240-255

Pre-heat ON and auto pressurize ON (disabled when auto-heat ON)

ΔOperation Guide

1. Check output nozzle and install the extension tube

a) Check carefully the output nozzle and extension tube of each machine, make sure the

output nozzle and extensive tube are in good shape and there is no powder aggregate.

b) Install the extension tube if use HC8200 MEDIUM and HC8200 LARGE. When use HC8200

SMALL there is no need to install extension tube.

2. Fill SPARKULAR®JET

a) Open powder bags and fill the feeding hopper. Hopper capacity of SPARKULAR®JET is

450g.

b) Choose correct consumable according to the application scenario. SPARKULAR®JET can

only use HC8200 LARGE, MEDIUM and SMALL.

c) Please be noted that there may sparks or remains fall to the ground. Make sure no

flammable material on ground in the safety zone.

d) Maximum effect height: HC8200 LARGE is 10m, HC8200 MEDIUM is 8m, HC8200 SMALL is

5m.

e) Make sure the lid of hopper is locked tight after filling.

3. Install SPARKULAR®JET

a) Horizontal installation is preferred for SPARKULAR®JET. If need to installed SPARKULAR®

JET in angles, maximum firing angle is 15° and can ONLY be angled to the left side as below

picture.

b) Make sure the machine is securely installed to avoid tipping.

4. Connect SPARKULAR®JET and Host Controller with power / DMX cable

a) Make sure power supply in consistent with the rated voltage of the equipment, and the

socket must well grounded.

b) Maximum cascade of SPARKULAR®JET is 6 units (BT91) / 3 units (BT92) with a standard

power cable. Do not connect exceed units to a single electrical circuit.

c) If use together with HOST CONTROLLER ZK6200/6300, each unit of SPARKULAR®JET must

set unique DMX address, otherwise it may leads to signal interference.

d) Suggest to plug in a DMX terminator into the DMX out in last unit of machine.

e) Turn on host controller and SPARKULAR®JET.

5. Activate SPARKULAR®JET by swipe RFID card

a) Swipe an RFID card. Read the card as show below. SPARKULAR JET screen flash once if read

successfully.

b) SPARKULAR®JET will report E4 when remaining firing times is less than 10mines.

c) Please note each RFID card come with 200g package HC8200 can increase single machine 30

firing times, the maximum recharge times each time for SPARKULAR®JET is 120 times,

when remaining firing times reached 120, it can’t recharge anymore RFID card.

CN. 00000001

6. Clear material

Run clear material for all SPARKULAR®JET before firing by press “CLEAR” button on host

controller or turn DMX value to 60-80 on second channel.

7. Programming and Firing

a) Programming SPARKULAR®JET, set the “Material Select”in the menu according to the

consumable (HC8200 LARGE / MEDIUM / SMALL) you use.

b) Heating up and pressurize the machine, it takes around 8min.

c) Make sure the prescribed safety zone is clear.

d) Firing. Between each firing there is a firing interval which is for the pressure recovery of the

built in pressure tank.

e) The operator should always have a clear view of the device, so that he/she can stop the

show immediately when there is danger.

8. Clear material

a) Clear material for SPARKULAR®JET after show, clear material will remove the remaining

particles from heating chamber.

b) Running clear material once for SPARKULAR®JET. For angled installation, please try clear

material several times, until there are only few or no sparks spray out from output nozzle.

9. Turn off machine and empty the feeding hopper

a) Power off SPARKULAR®JET and host controller, allow SPARKULAR®JET to cool down.

Whenever deliver or not use machine for a long period of time, please empty the remaining

HC8200 in hopper, and store the remaining HC8200 in a dry sealed bottle for next time use.

b) Operators can use handheld vacuum cleaner to empty the feeding hopper. Do make sure

the machine was cool down when clean it. Do NOT use high-power vacuum cleaners to

avoid hot consumables being sucked into the vacuum cleaner from the heating chamber

and cause fire.

c) Never touch the output nozzle of SPARKULAR®JET. DANGER OF GET BURNT!

ΔMaintenance

a) Empty the feeding hopper before shipment of machine.

b) Empty the feeding hopper if long time not use, for high humidity environment we suggest

to empty feeding hopper after each show.

c) Clear material both before and after the show.

Other manuals for SPARKULAR JET

This manual suits for next models

Other Showven Dj Equipment manuals

Showven

Showven SPARKULAR mini User manual

Showven

Showven uFIamer PF10 User manual

Showven

Showven SONICBOOM JET User manual

Showven

Showven SPARKULAR FALL User manual

Showven

Showven uFlamer User manual

Showven

Showven SPARKULAR Cyclone BT61 User manual

Showven

Showven SONICBOOM X User manual

Showven

Showven SPARKULAR BT01 User manual

Showven

Showven SPARKULAR miniFALL BT14 User manual

Showven

Showven SPARKULAR miniFALL BT14 User manual

Showven

Showven SPARKULAR FALL User manual

Showven

Showven uFlamer User manual

Showven

Showven Sparkular User manual

Showven

Showven uFlamer User manual

Showven

Showven uFlamer Volcano User manual

Showven

Showven SPARKULAR TRIPLE BT51 User manual

Showven

Showven FXcommander User manual

Showven

Showven uFlamer X20 User manual

Showven

Showven SPARKULAR JET User manual

Showven

Showven SONICBOOM PLUS SMOKEJET User manual

Showven

Showven SPARKULAR PRO User manual

Showven

Showven SPARKULAR FALL User manual

Showven

Showven SPARKULAR PRO BT71 User manual

Showven

Showven Circle Flamer X-F1800 User manual

Popular Dj Equipment manuals by other brands

ALPHA LITE

ALPHA LITE ALPHA 1500 User manual book

Chauvet

Chauvet OVATION E-930VW Quick reference guide

Zumtobel

Zumtobel APHRODITE Home Instructions for use

Snow Masters

Snow Masters Zig Oscillator user manual

EuroLite

EuroLite 50530554 user manual

Beamz

Beamz BUV243 user manual

thomann

thomann Stairville DJ Lase 40-G MK-III user manual

Eagletone

Eagletone 6 Eyes Flower user manual

EuroLite

EuroLite FLD-1508 user manual

Technical Pro

Technical Pro LG8xSEA user manual

JB Systems

JB Systems Lounge Laser DMX Operation manual

Lightmaxx

Lightmaxx Vega Halo 90 user manual

Elation

Elation FUZE WASH Z350 user manual

Maverick

Maverick MK3 WASH Quick reference guide

Infinity

Infinity TF-260C7 Fresnel manual

Chauvet

Chauvet EVE E-50Z Quick reference guide

Eliminator Lighting

Eliminator Lighting E 138 manual

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC user manual