ShowPro K SMART PROFILE User manual
1
K SMART PROFILE
MANUAL
LEDMOV440
2
CONTENTS
SAFETY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
INTRODUCTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
PHOTOMETRICS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
DIMENSIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
OVERVIEW - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
CONNECTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
MENU - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
DMX CHART - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
MAINTENANCE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
TROUBLESHOOTING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
3
SAFETY
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with care for future reference, it contains important information about the
installation, use and maintenance of the unit.
General instructions
- The products referred to in this manual conform to the European Community Directives and
are therefore marked with CE.
- The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled
personnel only. Never make any modifications on the unit not described in this instruction
manual, otherwise you risk an electric shock.
- Connection must be made to a power supply system fitted with efficient earthing (Class I
appliance according to standard EN60598-1). It is recommended to protect the supply lines
of the units from indirect contact and/or shorting by using appropriately sized residual current
devices.
- The connection to the main network of electric distribution must be carried out by a
qualified electrical installer. Check that the mains frequency and voltage correspond to those
for which the unit is designed as given on the electrical data label.
- This unit is not for home use, only use for professional applications.
- Never use the fixture under the following conditions:
• in places subject to vibrations or bumps;
• in places with a temperature of over 40 ℃.
- Make certain that no flammable liquids, water or metal objects enter the fixture.
- Do not dismantle or modify the fixture.
- All work must always be carried out by qualified technical personnel. Contact the nearest
sales point for an inspection or contact the manufacturer directly.
- If the unit is to be put out of operation definitively, take it to a local recycling plant for a
disposal which is not harmful to the environment.
4
Warnings and installation precautions
- If this device is operated in any way different to the way described in this manual, it may
suffer damage and the warranty becomes void. Any unauthorized operation may lead to
dangers like short circuit, burns, electric shock, etc.
- Before starting any maintenance work or cleaning the fixture, cut off power from the main
supply.
- Always additionally secure the fixture with a safety chain. When carrying out any work,
always comply scrupulously with all the regulations (particularly regarding safety) currently in
force in the country in which the fixture is being used.
- Install the fixture in a well-ventilated place.
- Keep any flammable materials at a safe distance from the fixture.
- Shields, lenses or ultraviolet screens shall be changed if they have become damaged to
such an extent that their effectiveness is impaired.
- The lamp (LED) shall be changed if it has become damaged or thermally deformed.
- Never look directly at the light beam. Note that fast changes in lighting, e.g. flashing lights,
may trigger epileptic seizures in photosensitive persons or persons with epilepsy.
- Do not touch the product’s housing when operating because it may be very hot.
INTRODUCTION
Features
• 600W 6000K LED engine
• 20,320 lumen output
• Extremely even spot with flawless field consistency
• CMY + CTO for precise control and smooth adjustment on colour mixing
• CRI>90 (HR filter)
• Animation wheel, adjustable frost, dual gobo wheel
• Bi-directional 4-facet prism with variable speed
• 16-bit dimming with SPWM control
• Fast, smooth Pan/Tilt movement
• DMX and RDM control
5
SPECIFICATIONS
Light source: 600W LED
Beam angle: 6°~50°
Output: 20322Lm(50°) / 12208Lm(6°)
Color temperature: 6000K
CRI: 70 / 90 (CRI filter)
LED life: 20000hrs
Pan/Tilt: 540° / 270°
Color: CMY + colour wheel (7 + open) + CTO
CTO: 3200K~6000K, linear
Gobos(rotating): 7 interchangeable + open
Animation: 1 animation wheel
Framing System: 4 independent blades (+/- 35°), rotatable (+/- 60°)
Iris: 15 leaves 10%~100% motorized linear iris
Focus: Motorized
Zoom: 6~50° (8x +)
Strobe: 0-30Hz
Dimming: 4 dimming curves, 0~100% linear dimming
Prism: Rotating bi-directional 4-facet prism with variable speed
Mains: 100～240VAC，50/60Hz
Consumption: 730W @ 230V / 782W @ 120V
Power connections: PowerCon IN/OUT
Data connections: 3pin and 5pin DMX IN/OUT
Power linking: 2pcs@230V
Data linking: up to 25pcs
Control protocol: DMX512/RDM
DMX channels: 33CH
Onboard menu: TFT display
Dimension: 355*257*593mm
Weight: 24KG
6
PHOTOMETRICS
GOBOS
COLOURS
FRAMING ANIMATION CMY
SHUTTER
7
DIMENSIONS
8
OVERVIEW
Fixture Illustration
1. Control Panel 6. Fuse
2. 3 Pin DMX In 7. PowerCon In
3. 3 Pin DMX Out 8. PowerCon Out
4. 5 Pin DMX In 9. Omega Bracket
5. 5 Pin DMX Out
Control Panel
UP:Increase value or previous menu item
DOWN: Decrease value or next menu item
LEFT: Return to top level menu
RIGHT: Select units, tens, hundreds
ENTER: Confirm, step through menu, activate display
9
INSTALLATION
The K Smart must be set up on a solid and even surface.
By means of the brackets on the baseplate, the unit can also be mounted upside down to a
cross arm. For mounting, strong, stable clamps are required.
The bolts of the brackets are placed into the openings provided in the base plate and turned
clockwise until they lock.
Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating.
The mounting place must be of sufficient stability and be able to support a weight of 10 times
the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations
(particularly regarding safety) currently in force in the country in which the fixture is being
used.
Always additionally secure the fixture with a safety chain. For this purpose, fasten the safety
chain in a suitable position so that the maximum fall of the fixture will be 20 cm.
10
CONNECTION
Power Connection
Using PowerCon In/Out. Power cables
connected in series.
Attention: due to power rating, one power
cable can connect 2 units maximum
Do not connect more than 2 units in series with one power cable.
Do not use with damaged power cable.
Power off the fixture when not in use.
DMX Connection
This manual suits for next models
1
Table of contents
Other ShowPro Dj Equipment manuals
ShowPro
ShowPro NEPTUNE 200 BEAM User manual
ShowPro
ShowPro Atomizer Pro Hazer User manual
ShowPro
ShowPro LED PAR Hex-18 IP65 User manual
ShowPro
ShowPro Pro Haze 3500 User manual
ShowPro
ShowPro LED House Light User manual
ShowPro
ShowPro Fusion IP Profile FC User manual
ShowPro
ShowPro LEDMOV640 User manual
ShowPro
ShowPro LEDFRE131 User manual
ShowPro
ShowPro PLUTO 2000 User manual
ShowPro
ShowPro Hercules User manual
