3. DESCRIPTION OF EACH SECTION VZ-35A (4986-009)
-4-
3-2 DESCRIPTION OF EACH SECTION
1 Thrust sensor holder:
Fix a sensor with sensor adapter 12
2 Spindle micrometer:
Measuring range ; 0 to 25,000µm
Minimum reading ; 10µm
3 Target for static characteristic check:
This is moved by the spindle micrometer.
In addition to the standard target material of JIS SCM440,other target
materials such as copper, aluminium,brass, titanium, etc. are available.
However, accuracy guarantee of measuring is limited when
the material of a subject is SCM440.
4 WOBBLE plate:
This is a disc with slight inclination and made of the same mateial as that of
the target for static characteristic check.
This is driven by electric motor to obtain vibration with accurate amplitude.
5 Side arm:
The sensor can be moved with a dial indicator attached.
6 Phase marker sensor holder:
Fix a phase marker sensor using a sensor adaptor 12 .
7 Speed controller:
Turning to the right increases rotating speed of the WOBBLE plate.
8 Power supply switch:
Thie is a power supply switch.
9 Voltage select switch:
This switch selects either one of 115VAC or 230VAC.
Select the voltage with a scerwdriver.
10 Fuse holder:
A fuse with a capacity of 0.5A is used.
CAUTION
Please do not touch while rotatin
