Shinever SHS-101 User manual
SHINEVER®
User Guide
Smart Home Stations
(SHS-101/102/103)
Page | 2
Standards and Safety
The Smart Home Stations Devices including SHS-101, SHS-102 and
SHS-103 from INNOVATAG SOLUTIONS have been designed to
meet the following standards:
The Smart Home Stations devices, SHS-
101,
SHS-102 and SHS-
103 modules are all meets the
requirements for CE-RED marking per EN61326-1
RoHS
The Smart Home Stations devices, SHS-
101,
SHS-102 and SHS-
103 modules are all meets the
requirements for RoHS marking
Install Smar
t Home Stations PowerSafe Module in
accordance with local and national electrical
Page | 3
Contents
Introduction …………………………. 5
Hardware …………………. ……… 6
Software …………………………… 8
User Interfaces ………………..….. 8
APP User Interfaces ....….. 8
APP Main Toolbar …....….. 8
Communication Toolbar …. 8
Function Pages ………..….. 8
Features ………………………..….. 16
System Requirements ………..….. 21
Model Specifications ..………..….. 22
Page | 4
Care and Handling of Your Smart
Home Station
The SHINEVER®Smart Home Stations units are designed to be used
as devices in home environment. It is important that you handle these
units carefully to avoid hardware damage and data loss. Please read
the following warnings before attempting to install, use, or move your
Smart Home Stations units:
Do not use power adapter which provides more than 3.3V ~ 5.5V
DC for the device to avoid possible hardware damage and
potential data loss. You can safely use power adapter which is
lower than 5.5V DC for the units.
Do not attempt to open the device case, especially when it’s on
power and operation to avoid possible hardware damage or data
loss.
Incorrect handling, such as dropping the units, can cause data
loss and damage hardware.
Do not set any liquids or drinks on the units. Liquids can damage
the internal electronics.
Do not block airflow around the units while the units are turned
on.
Do not stack anything on top of the units; this can overheat and
damage your devices.
Page | 5
Introduction
Thanks for your selection of Smart Home Stations (SHS-101/102/103).
The SHS-101/102/103 devices are equipment specifically designed for
which can provide real-time environment data, GPS / Baidu navigation
data, EMG health data and so on, and transmitted the data to data
server or mobile devices through multiple communication means, such
as Wi-Fi, Blue Tooth (BLE), LoRaWAN, and NFC communication
protocols.
The Smart Home Stations
devices fit greatly for
personal and family usage
and also fit for business
situation in some cases.
The devices are powered
with 220/110V AC to 3.3V
DC adapter and for some
device as SHS-101,
additional 5.0V DC power
is needed for specific
sensors.
Page | 6
Hardw are
1.
Product Package:
Your Smart Home Stations device components are listed below:
Smart Home Stations – Station：
SHS-101 or SHS-102 or SHS-103
Power Adapter:
110V AC or 220V AC to 3.3V DC Adapter with miniUSB
connector to the unit
110V AC or 220V AC to 5.0V DC Adapter with miniUSB
connector to the unit (Optional for SHS-101 unit)
User Manual: the user guide of product
Warranty Card
2.
Product Components:
Air Window：
Air flow window for Air-Quality sensors (SHS-101)
5.0V DC Input Connector:
The miniUSB connector for the 5.0V DC power input to the
unit (Optional for SHS-101)
3.
Power-On Setup:
Step 1:
Open the package and put the unit on a surface and keep
it stabilized
Page | 7
Step 2: Plug-in the end of power adapter with miniUSB connector
which comes with the device package, to one of the unit’s
miniUSB interfaces (“COM”) on the back of unit
Note: Please be aware that you need to connect one of
the power outlets with the miniUSB power adapter. You
can use the outlet on the left side for data
communication, if you need to upgrade the software of the device
or transfer to the data from the device to PC with UART data
communication.
Page | 8
Softw are
1.
System Requirement:
Your Smart Home Stations device can be controlled for the
configuration and data display and other functions with mobile
equipment such as a smart phone or tablet. The system has the
following requirements:
1) Operating System: Android 8.0
2) Mini SDK Version: 19
2.
Software Download:
Your Smart Home Stations APP can be downloaded with two
methods:
1) Download the application from the official APP website:
http://www.smarthomestations.com/download
2) Download by accessing the QR Code:
Page | 9
User Interfaces
1.
The APP User Interfaces:
Your Smart Home Stations
device can be controlled for the
configuration and data display
and other functions with mobile
equipment such as a smart
phone or tablet. The system
has the following requirements:
•Operating System
Android 8.0
•Mini SDK Version: 19
2.
The APP Main Toolbar:
The APP Main Toolbar is on the top of the all the APP pages:
In the main toolbar, there are five icons which are the entries of
five data and function pages, Environment Data Dashboard page,
Data Monitoring page, Location Coordinates and Map page, Data
History page and Emergency Alarm page:
Page | 10
Environment Data Dashboard:
contains a list of all
the environment data including Air Quality Data,
Environment Data, and Location Coordinates data
and so on.
Data Monitoring: the page displays two selected
data to monitor with progress bar charts. The charts
can be configured with selected data, color, text
size and other parameters.
Location Coordinates:
display the latitudes and
longitudes of the user current location and the map
accordingly. The location coordinates can be
configured for sending alarm.
Data History Chart:
Display selected data history
chart and the data can be saved in a file which can
be configured for specific formats.
Emergency Alarm:
Send quick alarm message in
emergency situation. The default information sent
with the alarm message includes location
coordinates and other pre-configured parameters.
The message can be sent through LoRaWAN
communication ch
annel, Bluetooth channel, WIFI
channel, based on the configuration.
This manual suits for next models
2
Table of contents
