Shenchen Precision Pump YZ35-PPS User manual
Shenchen Precision Pump
Manual of YZ35 PPS Pump Head
Baoding Shenchen Precision Pump Co.,Ltd
DOMINIQUE DUTSCHER SAS
Note:
Please read the manual carefully before operating the product.
Warning:
Tubing may have crack due to wear. It results in the overflow of fluid
from tubing. In that time human body and instruments may be
damaged. So user must check usually and change tubing in time.
When changing the tubing or the position of the tubing, please stop the
pump head rotating, otherwise fingers or clothes may be caught.
There are moving parts of the pump head inner, before opening the
upper block, it must be carried out according to the following
requirements:
Ensure the pump is isolated from the main power supply.
Ensure there is no pressure in tubing.
If the tubing gets mistakes, ensure the liquid in the tubing is
discharged to other containers or drain tubing.
If transports the dangerous liquid, must wear the protective
clothing and eye protection.
DOMINIQUE DUTSCHER SAS
Catalogue
1. Product Introduction .............................................................................. - 1 -
2. Instructions .............................................................................................- 1 -
3. Installation Dimension ...........................................................................- 7 -
4. Pump Head Specification .......................................................................- 8 -
5. Troubleshooting ..................................................................................... - 9 -
6. Maintenance .........................................................................................- 10 -
7. Warranty and After Service ..................................................................- 11 -
DOMINIQUE DUTSCHER SAS
Shenchen Pump YZ35-PPS Pump Head
- 1 -
1. Product Introduction
Easy-load pump head is very convenient to install the tube clamp. Following
customers’ requirements, it can connect with multichannel, suitable for OEM
supporting application. YZ35 pump head is made by pps--Polyphenylene sulfide
material which makes it more outstanding in rigidity and structural performance. It has
super high temperature resistance and anti-corrosion, especially in strong chemical
corrosion resistance such as organic solvents, which effectively reduces the damage
rate of the pump head and greatly reduces the customer's repair and maintenance costs.
2. Instructions
DOMINIQUE DUTSCHER SAS
Shenchen Pump YZ35-PPS Pump Head
- 2 -
2.1 Pump Head Installation
2.1.1 Single Pump Head Installation
First the coupling is installed on main shaft of the pump head, tighten the M5
screws after positioning according to the size shown in the figure, as shown,
and then connect the pump head to the drive shaft through the coupling.
2.1.2 Multiple Pump Head Installation
A plurality of YZ35 pump heads are used with extended screws in tandem,
with 2 pump heads as an example. First, the coupling is mounted on the main
shaft of the tandem pump head 1, tighten the M5 screws, and then install the
cushion on the shaft head of the pump head 2, next insert the shaft end of
pump head 2 into the shaft groove of pump head 1. Connect the serial
connected pump head to the drive with extended screws as shown below.
DOMINIQUE DUTSCHER SAS
Shenchen Pump YZ35-PPS Pump Head
- 3 -
Note:
When install the pump, the entire pump head is disassembled into two separate
pump heads as shown in the picture above. The two pump head roller
assemblies should be staggered and installed in sequence. The wheel status is
as shown in the figure below.
The main shaft connection between two adjacent pump heads needs to install a
shock absorber as shown in the figure. Failure to do so will result in abnormal
operation of the pump head.
Note: Users need to fasten the screws with similar force, and can’t be too tight,
to avoid the lower support deform and make working noise.
DOMINIQUE DUTSCHER SAS
Shenchen Pump YZ35-PPS Pump Head
- 4 -
2.2 Tube Installation
2.2.1 Tube Clamp
Function of the tube clamp: It can better fix the tube and reduce tube
shaking, besides improve the transmission stability and transmission
accuracy. Effectively reduce tube wear and extend tube life.
Tube Clamp Type: 26#, 73#, 82#, as below:
2.2.2 Tube Installation
Pull the lever anti-clockwise 180°, open the upper block.
Draw two lines with a distance of 186mm on the tube.
Put the tube between rollers and upper block, the line faces up.
DOMINIQUE DUTSCHER SAS
Shenchen Pump YZ35-PPS Pump Head
- 5 -
Sleeve the tube into the tube clamp, the sharp point of the tube clamp
should be align at the line. Pay attention to ensure that the split surfaces
of the two tube clamps are parallel and parallel to the installation surface
of the pump head.
Clip slot of two tube clamps into the slideway of the pump head, press
hard until it can't be pressed. At this time, the tube clamp is not installed
in place.
Sharp corner
DOMINIQUE DUTSCHER SAS
Shenchen Pump YZ35-PPS Pump Head
- 6 -
Pull the lever clockwise and slowly press down until the upper block is
pressed down. At this time, the tube clamp is also installed in place.
2.3 YZ35 Pressure Adjustment
YZ35 pump head can adjust pressure of the tube outlet by the rotary knob on
pump head body, rotate with the arrow direction, pressure enlarge, otherwise
reduce.
DOMINIQUE DUTSCHER SAS
Shenchen Pump YZ35-PPS Pump Head
- 7 -
3. Installation Dimension
DOMINIQUE DUTSCHER SAS
Table of contents
Other Shenchen Precision Pump Water Pump manuals
Shenchen Precision Pump
Shenchen Precision Pump M6 Series User manual
Shenchen Precision Pump
Shenchen Precision Pump V6-12L Series User manual
Shenchen Precision Pump
Shenchen Precision Pump N6 Series User manual
Shenchen Precision Pump
Shenchen Precision Pump ZG600x User manual
Shenchen Precision Pump
Shenchen Precision Pump YZ35 Series User manual
Shenchen Precision Pump
Shenchen Precision Pump YZ Series User manual
Shenchen Precision Pump
Shenchen Precision Pump LabV Series User manual
Shenchen Precision Pump
Shenchen Precision Pump Lab M Series User manual
Popular Water Pump manuals by other brands
Sykes AmeriPumps
Sykes AmeriPumps GP100M Operation and maintenance instructions
DUROMAX
DUROMAX XP WX Series user manual
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 operating instructions
Franklin Electric
Franklin Electric IPS Installation & operation manual
Xylem
Xylem e-1532 Series instruction manual
Milton Roy
Milton Roy PRIMEROYAL instruction manual