Sharp Touch Display Launcher User manual
Touch Display Launcher
OPERATION MANUAL
Version 1.0
2
E
Introduction......................................................................3
About Launcher ...............................................................4
Using the launcher .......................................................5
Change the group ........................................................5
Settings.............................................................................6
Adding a new icon........................................................7
Editing an icon..............................................................8
Editing a group ...........................................................10
Changing the wallpaper ............................................. 11
Other settings............................................................. 11
Contents
3
E
This software enables you to launch software programs by pen operation or touch operation.
• Softwareprogramscanbeaddedandchanged.
• URLsandlescreatedinapplicationscanberegistered.
ThissoftwareisforthePN-L601B/PN-L602B/PN-L702B/PN-L802B.
Important Information
• PleaseunderstandthatSHARPCORPORATIONbearsnoresponsibilityforerrorsmadeduringusebythecustomerora
third party, nor for any other malfunctions or damage to this software arising during use, except where indemnity liability is
recognized under law.
• Transcribingorduplicatingpartorallofthismanualand/orthissoftwarewithoutpermissionfromourcompanyisnot
permitted.
• Asapartofourpolicyofcontinuousimprovement,SHARPreservestherighttomakedesignandspecicationchangesfor
productimprovementwithoutpriornotice.
• ThecontentsordetailsmayvarydependingonthescreencongurationandOSversion,etc.
• ThismanualdoesnotcontainbasicoperatinginstructionsforWindows.
• Thepathsusedinthismanualassumethecasewherethissoftwarebeinginstalledinthedefaultfolder.Theactualpathmay
varydependingonthefolderspeciedduringinstallation.
Trademarks
• Microsoft,Windows,WindowsVistaandInternetExplorerareeitherregisteredtrademarksortrademarksofMicrosoft
CorporationintheUnitedStatesand/orothercountries.
• Namesofproductsandotherpropernounsaretheregisteredtrademarksortrademarksoftheirrespectivecopyrightholders.
Introduction
4
E
Follow the steps below to start the software.
• OntheDesktop,touchthe“TouchDisplayLauncher”shortcuticon( )twicequickly(ordouble-clicktheicon).
• Clickthe“Start”button,andthenselect“AllPrograms”-“SHARPTouchDisplayLauncher”-“TouchDisplayLauncher”.
TIPS
• Youcansetthelaunchertostartautomaticallyeachtimethecomputerisstarted.(Page11)
• Duringinstallation,selectthe“AddTouchDisplayLaunchertoStartupFolder”checkboxtosetthelaunchertoautomatically
start each time the computer is started.
• Theuseofasecondarydisplayisnotsupported.
• Setthescreenresolutionto1920x1080andthescreencolorto32bits.
(1)
(2) (3)(4)(5)(6)
(1) Icon display area
Softwareprograms,les,andURLsthatcanbelaunchedaredisplayedasicons.
Up to 10 icons are displayed.
Theiconsettingscanbechanged.(Page8)
(2) Select Group
Thegroupshownintheicondisplayareacanbechanged.(Page5)
There are 5 groups in this software, and an icon can be registered for each group.
Ifyouorganizethegroupsbyapplication,theicondisplaycanbechangedbysimplychangingtothedesiredgroup.
(3) Settings
Changethelaunchersettings.(Pages6to11)
(4) Minimize
Minimizethelauncher.
(5) Close
Close the launcher.
(6) Group name
The group name appears.
About Launcher
5
E
Using the launcher
Touch an icon to launch the software program that is registered in the icon.
Whentheicondisplayareaisdragged,theiconsrotate.
The icons rotate.
TIPS
• Ifyoudonothavepermissiontoaccessale,nothingwillhappenwhenyoutouchtheicon.(Forexample,whenalethat
only another user has permission to access is registered in the icon.)
• Youcansetthelaunchersothataniconrotatestothefrontwhenitistouched,andasoftwareprogramislaunchedby
touchingthefronticon.(Page11)
Change the group
Change the group displayed in the icon display area.
Ifyouorganizethegroupsbyapplication, the icon display can be changed by simply changing to the desired group.
1. Touch “Select Group”.
Currently selected group
2. Touch the group to be displayed.
TIPS
• Theiconsinthegroupcanbesorted.Iconscanbeaddedtoagroupordeletedfromagroup.(Pages7to9)
6
E
Launchersettingscanbechanged,suchasaddingiconsandchangingthebackground.
1. Touch in the launcher.
The launcher settings screen appears.
Screen example: Group settings screen
(1)
(2) (3) (4) (5)
(1) Settings screen
The settings appear.
(2) Group, Wallpaper and Other
Change to each of the function screens.
(3) OK
The settings are applied and you return to the launcher screen.
(4) Cancel
Returntothelauncherscreen.
Ifyouchangedsettings,aconrmationmessageappears.Toapplythesettingsandreturntothelauncherscreen,touch
“Apply”.Toreturntothelauncherscreenwithoutapplyingthesettings,touch“DoNotApply”.
Toreturntothesettingsscreen,touch“Cancel”.
(5) Apply
The settings are applied.
Settings
7
E
Adding a new icon
1. In the group settings screen, touch a blank location that does not have an icon registered.
2. Selectthesoftwareprogram/letobelaunchedin“SelectLink”andtouch“OK”.
Alternatively,selectawebpagewith“SelectWebPage”andtouch“OK”.
“Select Web Page” can be used to select web pages that have been added to Favorites in Internet Explorer.
SelectLinkScreen SelectWebPageScreen
(1)
(2) (2)
(3)
(1)SelectLinkScreen
Select the software program/le to be registered.
The software program/le location can be selected from the button on the left side. To select a different folder, touch “Browse”.
Touch “↑” to move up to the next higher folder.
You can touch the path of a link to directly enter a link.
(2)SelectLink/SelectWebPageChange
Switch between “Select Link” screen and “Select Web Page” screen.
(3)SelectWebPageScreen
Web pages added to Favorites are shown at the left side of the screen.
A preview of the selected web page appears next to Favorites.
You can touch a URL to directly enter the URL. After entering the URL, touch “Move” to show a preview of the web page of
the entered URL.
8
E
3. Set icon details and touch “OK”.
(1)
(2)
(3)
(1) The image to be used as the icon appears.
To change the image, touch “Change”.
Touch “Select Any Image” and select the image to be used as an icon.
Images in JPEG format and PNG format are supported.
To restore the icon image to the original image, touch “Restore Original Image”.
(2) The icon name appears.
To change an icon name, touch the icon name and directly edit the name.
Up to 32 characters (16 characters per line, 2 lines) can be entered.
(3) The icon link appears.
To change a software program, le, or web page, touch “Browse” and select the software program, le, or home page
that you want to register.
A link can be touched to directly change a path.
TIPS
• A folder or le for which you do not have access permission cannot be selected.
• If the user’s permissions are limited, it may not be possible to display some programs.
Editing an icon
An icon can be edited, copied, or deleted.
In the group settings screen, touch an icon that was previously added.
(1)
(2)
(3)
(1) Edit Icon (Page 9)
Change the image of the icon, the icon name, or the link.
(2) Copy (Page 9)
Copy the selected icon.
(3) Delete
Delete the selected icon.
A conrmation message appears. Touch “Delete”.
9
E
nEditing an icon
An icon image, icon name, or icon link can be changed.
1. In the group settings screen, touch the icon that you want to edit and touch “Edit Icon”.
2. Change a setting and touch “OK”.
(1)
(2)
(3)
(1) The image to be used as the icon appears.
To change the image, touch “Change”.
Touch “Select Any Image” and select the image to be used as an icon.
Images in JPEG format and PNG format are supported.
To restore the icon image to the original image, touch “Restore Original Image”.
(2) The icon name appears.
To change an icon name, touch the icon name and directly edit the name.
Up to 32 characters (16 characters per line, 2 lines) can be entered.
(3) The icon link appears.
To change a software program, le, or web page, touch “Browse” and select the software program, le, or home page
that you want to register.
A link can be touched to directly change a path.
TIPS
• A folder or le for which you do not have access permission cannot be selected.
• If the user’s permissions are limited, it may not be possible to display some programs.
nCopying an icon
An icon can be copied to the same group or a different group.
Touch the icon that you want to copy, and
touch “Copy”.
Touch the copy destination. The icon is copied.
TIPS
• If a destination that does not have an icon is selected, the icon is copied.
• If you select a destination that already has an icon, a conrmation message will appear.
To overwrite, touch “Overwrite”.
10
E
Editing a group
A group name can be changed, and a group can be copied or deleted.
Touch the icon of the group in the group settings screen.
(1)
(2)
(1) Copy (below)
The contents of a group can be copied to another group.
(2) Delete
Thecontentsofthegrouparealldeleted.Aconrmationmessageappears.Touch“Delete”.
nCopying a group
The contents of a group can be copied to another group.
Touch the group you want to copy and touch
“Copy”.
Touch the copy destination. The group is copied.
TIPS
• Whenthecopydestinationistouched,aconrmationmessageappears.
Tooverwrite,touch“Overwrite”.
nChanging a group name
1. Touch a group name in the group settings screen.
The group name can be edited.
Upto10characters(5charactersperline,2lines)canbeentered.
2. Enter the group name.
This manual suits for next models
1
Table of contents
Other Sharp Software manuals
Sharp
Sharp PenCell IQ-9B01 User manual
Sharp
Sharp VR-PK50E User manual
Sharp
Sharp REACH User manual
Sharp
Sharp Qtopia Desktop User manual
Sharp
Sharp SL-5500 File Manager Guide Installation guide
Sharp
Sharp VN-EZ1 Manual
Sharp
Sharp PixLab Setup guide
Sharp
Sharp AR-PB2 User manual
Sharp
Sharp XE-A207 User manual
Sharp
Sharp PN-L702B User manual
Sharp
Sharp CE-LK2 User manual
Sharp
Sharp PN-V601 User manual
Sharp
Sharp AR-NB2A User manual
Sharp
Sharp AR-NB2A User manual
Sharp
Sharp e-Copy ShareScan Manual
Sharp
Sharp AR-P17 Software setupg guide User manual
Sharp
Sharp MX-7001N Series User manual
Sharp
Sharp EL-9900 User manual
Sharp
Sharp AR-PB2 Owner's manual
Sharp
Sharp FO-NS2 User manual
