Sharp FG-F10M User manual
【Features】
１．Low reflection
・The wearer has a clear field of vision because there is low reflection of lighting.
・Since the lighting does not reflect on the wearer's face, the face is clearly visible to those who are
facing them.
２．Anti fogging
Water droplets spread over the surface, increasing the surface area and drying quickly. This prevents
fogging in many situations.
３．High transparent and clear
The coloration is minimal, and clear vision can be ensured.
Made in Japan
※Moth Eye Technology
•Technology to industrially create nano-convex surface structures with a size of 100 to 200 nm, similar to the eyes of moths,
which can fly even in total darkness.
•Continuously changing the refractive index through microscopic bumps prevents the reflection of almost all light.
◆Product Features
This is a face shield that utilizes surface reflection suppression technology (Moth-eye technology*)
developed in LCD technology.
◆Moth Eye structure effect
With Moth Eye structure Without Moth Eye structure
Low reflection
High
transmissivity
Anti fogging
User Manual
Face Shield
Thank you very much for purchasing this product.
Please read this User Manual carefully to ensure proper operation.
Be sure to read "Safety Precautions" before using the product.
Be sure to keep this manual in a place where you can refer to it at any time.
◆Contents ： □Frame □Film □User Manual
◆Specification
Model FG-F10M
Dimensions
Frame 183mm x 153mm x6mm（Width x Depth x Height）
Film 195mm x 268mm x 0.18mm（Length x Width x Thickness
）
Weight Frame 14g
Film 11g
Material Frame Polycarbonate
Film Polycarbonate, Acryl resin
Model FG-F10M
Water droplet
Water droplet
Quick dry = Anti fogging
４．０％
４．０％
９０％
０．３％
０．３％
低反射
高透過
９９％
Low
reflection
High
transmissivity
◆Name of each part ◆Instructions on use
◆Care
•If the film surface becomes dirty, soak a soft cloth such as a tissue or eyeglass cloth with commercially available rubbing alcohol (excluding
gel type) or diluted neutral detergent, and wipe it gently. If unevenness remains after wiping, wipe it gently with a tissue soaked in water
and wrung well. There is concave and convex processing on the film. If you rub it violently, the unevenness is broken and the function may
deteriorate.
◆Purpose of use
•This product is to reduces the contact of liquid droplets and dust to the face. Do not use it as a protective device against
solids or fire.
◆Precautions for use
•It cannot be used in places where harmful dust or gas is generated, or for the purpose of preventing them.
•Discontinue use if you have an abnormality on your skin or if it does not fit your skin.
•If you feel sick while wearing it, discontinue use.
•If you feel that your head is tight, adjust the mounting position or insert some material like a cushion.
•Please keep out of reach of infants.
•Do not use or store near fire.
•Store this product away from high temperatures and humidity and places exposed to direct sunlight.
•When disposing of this product, please dispose of it in accordance with the regulations of the local government.
◆Safety precautions *Please observe the following precautions
■The danger and its extent if the product is handled improperly.
Warning May cause death or serious injury
Caution Risk of minor injury or property damage
■The meanings of the graphic symbols used in the text.
Indicates that you must not do
Indicates that you should do
Warning To prevent injury Caution To prevent injury
⚫If it is damaged, never use it.
⚫Do not clean with benzene, thinner, kerosene, acidic detergent, alkaline
detergent, etc.
⚫Do not use in situations where there is a high risk of this product will fall off.
⚫Never disassemble or modify the main body or accessories.
⚫Do not use it only by children or within reach of infants.
⚫Do not use for purposes other than those described in this manual.
⚫Do not use while driving a car / motorcycle or bicycle.
⚫Be careful when handling the film in a way that the edges of the film
do not hurt your hands or face.
⚫Not use if the film is dirty or damaged.
⚫Install the film and frame correctly according to the instructions in th
manual.
⚫Discontinue use if you have an abnormality on your skin or if it does
not fit your skin
*** (subsidiary name and contact information)
Customer support：
claw
projection
hook
SHARP LOGO
Frame
hole
Projecting mark
□Film takeout
You can prevent fingerprints from
adhering to the film by taking out only the
top of the film with holes and attaching
the film to the frame
Upper: shallow
Lower: deep
Two holes are provided so that the angle of
the film when the face shield is attached
can be changed in two steps. it becomes
shallow to Insert the claws of the frame
into the upper hole, and it becomes deep
to Insert the claws of the frame into the
pilot holes
【Preparation 】
•Set the projecting mark on the film towards SHARP logo side on the frame.
【Procedure 】
１．Insert the claws of the frame in the order of holes ①→ holes ②on the film side.
２．Fit the protrusions of the frame into the two holes ③and ④in the center of the film.
【Wearing 】
•Lightly spread the handle of the frame and attach it to your head.
•Secure the frame on your forehead.
•If it is loose, pass a commercially available elastic cord through the hook of the frame and
tighten it.
□Film angle switching hole
□Removing
claw
hook
Film
hole hole hole
①②
③④
□Fitting
１．Remove the two holes ③④ in
the center of the film from the
protrusions on the frame.
２． Remove the holes on the film
side in the order of ②→ ①from
the claws on the frame.
Deep
Shallow
projection
Projecting mark
SHARP LOGO
Other Sharp Safety Equipment manuals
Popular Safety Equipment manuals by other brands
Innova
Innova Xtirpa Instruction and safety manual
bolle SAFETY
bolle SAFETY B810 quick start guide
SHENZHEN FANHAI SANJIANG ELECTRONICS
SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T instruction manual
Hiltron security
Hiltron security POWER8E Installation and use manual
Hatco
Hatco B-950P installation guide
Sitec
Sitec TX MATIC operating manual
