Sharp TOUCH DISPLAY DRIVER User manual
LCD MONITOR
TOUCH DISPLAY DRIVER
OPERATION MANUAL
Applicable models
PN-K322B/PN-K322BH/LL-S201A
Version 1.0
for Mac
2
E
Contents
Introduction......................................................................3
System Requirements..................................................3
Setting up the Computer.................................................4
Installing the touch display driver .................................4
Touch Panel Settings.......................................................5
How to congure settings.............................................5
Calibration ....................................................................7
Properties.....................................................................8
Uninstalling the Driver Software ..................................10
Touch Action ..................................................................11
Important Information
• This software has been shipped after strict quality control and product inspection. If, however, you nd any failure or
malfunction, contact your product dealer.
• Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a
third party, nor for any other malfunctions or damage to this software arising during use, except where indemnity liability is
recognized under law.
• Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not
permitted.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for
product improvement without prior notice.
• The contents or details may vary depending on the screen conguration and OS version, etc.
• This manual does not contain basic operating instructions for Mac OS.
Trademarks
• Apple, Mac and Mac OS are registered trademarks of Apple Inc.
• Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the U.S.A. and other countries.
• All other brand and product names are trademarks or registered trademarks of their respective holders.
3E
Introduction
System Requirements
To use the touch panel, the touch panel must be connected to a computer, and the touch display driver must be installed on the
computer.
OS Mac OS X v10.6, Mac OS X v10.7, Mac OS X v10.8
CPU Intel processor
Memory At least 2 GB
Free space on hard drive At least 5 MB
TIPS
• Depending on the application software, touch operation may not be possible (for example, if the application processes mouse
and other operations independently).
4
E
Setting up the Computer
To use the touch panel, the touch display driver must be installed and the touch panel must be connected to your computer.
Installing the touch display driver
The touch display driver is a program that enables you to use the touch panel to operate the computer that is connected to the
touch panel.
Caution
• To install, an administrator name (user name) and password are required.
• If an older version of the touch display driver is installed, remove (uninstall) the old version before installing the touch display
driver. (See page 10.)
• Do not touch the touch panel when connecting the USB cable.
If you touch the touch panel, it will lead to a malfunction. In this case, disconnect and then reconnect the USB cable.
1. Start your computer.
2. Exit all applications that are running.
3. Connect the USB cable for the touch panel to the computer.
To the USB terminal
of the computer
USB cable (Supplied)
USB port
USB port
LL-S201A
4. Run the setup program.
(1) Double-click the “TouchDisplay” folder, and then double-click the “Mac” folder.
(2) Double-click “SharpTouchDisplay.mpkg”.
5. Click “Continue”.
Follow the on-screen instructions to install the driver.
• If a screen prompting you to enter the name and password appears, enter the name and password of the administrator
and click “Install Software” (or “OK”).
• If the “When this software nishes installing, you must restart your computer. Are you sure you want to install the software
now?” screen appears, click “Continue Installation”.
6. Whentheinstallationnishedscreenappears,click“Restart”.
This completes the installation of the touch display driver.
Each time the computer is started, the touch display driver will start automatically to enable the touch panel to be used.
5E
Touch Panel Settings
The touch display driver starts automatically and the icon ( ) appears on the menu bar.
TIPS
• IfPN-K322B(orPN-K322BH)andLL-S201Aareconnectedatthesametime,ascreenforselectingthemodelwillappear
eachtimeyouselectasetting.
• Dependingontheconnectedmodel,thescreenimageisdifferent.
How to congure settings
nConguring settings from the menu bar
1. Click the touch display driver icon ( ) on the menu bar.
2. Click a menu to change a setting.
• CurrentResolution:Themodelcurrentlybeingusedandthecurrentscreenresolutionappear.
• Calibration:Seepage7.
• Properties:Seepage8.
• HardwareInformation:Selectthistospecify“RotateMode”.
-RotateMode:
Tocorrectthetouchpositionwhenthescreenisrotated,selectthescreenanglefromthefollowing:
Standard(0°)/90°/180°/270°
• VersionInformation:Showstheversionofthetouchdisplaydriver.
• DisableTDDriver:
Selecttodisablethetouchpanelfunction.
Todisableasingletouchpanelfunction,see“FunctionSetting”.(Seepage9.)
nConguring settings from System Preferences
1. Click “System Preferences” from the Apple menu ( ).
2. Click “SharpTouchDisplay”.
3. Click the menu and select settings.
Menu
TIPS
• Ifthe“ShowSettingUtilityinmenubar”checkmarkisremoved,thetouchdisplaydrivericon( ) does not appear on the
menu bar.
6
E
nSettings when two devices are connected at the same time
IfPN-K322B(orPN-K322BH)andLL-S201Aareconnectedatthesametime,selectthemodelwhosesettingswillbechanged.
*Twomodelscannotbesetatthesametime.
Caution
• Iftwodisplaysofthesamemodelareconnected,touchoperationwillonlybeenabledononemodel.
1. Click “System Preferences” from the Apple menu ( ).
2. Click “SharpTouchDisplay”.
The“DeviceSelection”screenappears.
3. Select the model whose settings you want to change.
Touch Panel Settings
7E
Calibration
Ifblackbandsappearatthetopandbottomorleftandrightofthescreen,performpositionadjustmentsothatthemousecursor
correctly moves to the point that is touched.
*Ifblackbandsappearbothatthetopandbottomandattheleftandright,thetouchpositionisnotcorrect.Inthiscase,change
the display.
nCalibration Method
Followthestepsbelowtocongurethesetting.
1. Click the touch display driver icon ( ) on the menu bar.
2. Click “Calibration”.
Auto
Ifblackbandsappearonthescreen,positionadjustmentisautomaticallyperformed.
Select“Auto”andclickon“Apply”.
Manual
Iftheautomaticallyadjustedtouchpositionisnotcorrect,enterthedisplayresolution(width,height)andclick“Apply”.
InthecaseofPN-K322B(orPN-K322BH),pleasecheckthemenuscreen.Inaddition,inthecaseofLL-S201A,pleasecheck
bytouching[InputSelect]onthemenuscreen.
Fordetails,seetheLCDMONITORmanual.
Touch Panel Settings
8
E
Properties
Settings for the touch action can be congured in the properties.
nDouble Click Range
Set the range over which the position can shift between the rst touch and the second touch and still be recognized as a double-
click (“Narrow” (8 pixels) to “Wide” (64 pixels)). To return the setting to the default setting, click “Default” (32 pixels).
nDouble Click Speed
Set the time that is recognized as a double-click. When a second touch occurs within the set time after the rst touch, it is
recognized as a double-click.
Speed Setting (Auto)
The inside of the frame can be touched twice (double-clicked) to set the speed automatically based on the interval between the
touches.
Set Manually
The speed can be set manually from “Slow” (about 1 second) to “Fast” (about 0.3 seconds).
Test
When the inside of the frame is double-clicked by touching it twice, the screen changes. If the screen does not change, repeat
the setting.
Default
Click to restore the default setting.
TIPS
• Depending on the application software, changing the setting may not have any effect (for example, if the setting is set
separately in the application).
Touch Panel Settings
9E
nRight-click
You can set press and hold to be recognized as a right click.*
Enable press and hold for right-clicking
When the checkbox is selected, press and hold is recognized as a right click.
Press and Hold Duration
Set the time until press and hold is recognized as a right click (“Short” (0.5 sec) to “Long” (1.5 sec)).
* If the Mac OS left-click long press action interferes with the press and hold action, do the following:
• Use “Click or tap with two ngers”
• Adjust “Press and Hold Duration” to a longer setting (toward “Long”)
nFunction Setting
Select the touch action to be used. (See page 11.)
Touch actions that are followed with a mark have multiple actions that can be used. Click a touch action and selected the
desired action.
Caution
• Touch actions that can be used vary depending on the OS.
* OS X v10.8 only
Touch Panel Settings
OS X v10.8/v10.7 OS X v10.6
*
10
E
Uninstalling the Driver Software
Caution
• To uninstall, an administrator name (user name) and password are required.
1. Disconnect the USB cable.
2. Execute uninstall.
(1) Double-click the “TouchDisplay” folder, and then double-click the “Mac” folder.
(2) Double-click “TouchDisplayDriver Uninstaller.app”.
(3) Click “Uninstall”.
• If a screen prompting you to enter the name and password appears, enter the name and password of the administrator
and click “OK”.
3. Whentheuninstallnishedscreenappears,click“Quit”.
This completes the uninstallation.
This manual suits for next models
3
Table of contents
Other Sharp Monitor manuals
Sharp
Sharp PN-S525 User manual
Sharp
Sharp PN-E602 User manual
Sharp
Sharp LL-T15G4-H - 15" LCD Monitor User manual
Sharp
Sharp LC 20M4U User manual
Sharp
Sharp LCD MONITOR User manual
Sharp
Sharp AQUOS 4T-C65DL1X Manual
Sharp
Sharp PN-L602B User guide
Sharp
Sharp IV-08MP User manual
Sharp
Sharp 60005523 User manual
Sharp
Sharp PN-E802 Professional User guide
Sharp
Sharp PN-L601B Quick start guide
Sharp
Sharp PN-C605B User manual
Sharp
Sharp PN-E421 User manual
Sharp
Sharp LC-20VM2 User manual
Sharp
Sharp PN-465E User manual
Sharp
Sharp PN-HW651 User guide
Sharp
Sharp PN-U553 User manual
Sharp
Sharp PN-T321 User guide
Sharp
Sharp MZ-1D05 User manual
Sharp
Sharp PN-V600 Operation Manual
