Sharp PN -HW431T User manual
PN-HW431T Dismantle Instruction
1
Dismantle Instruction
LCD MONITOR
MODEL
PN-HW431T
701
PN-HW431T Dismantle Instruction
2
Table of contents
1. Scope.................................................................................................................. 3
2. Tools for dismantling............................................................................................... 3
3. Dismantle Procedure .............................................................................................. 3
4. Back covers .......................................................................................................... 4
5. Printed circuit boards ............................................................................................. 5
6. Battery................................................................................................................ 5
7. LCD Module .......................................................................................................... 6
8. Capacitors............................................................................................................ 7
9. Parts List ............................................................................................................. 7
PN-HW431T Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove Back covers (section 4)
2. Remove Printed circuit boards (section 5)
3. Remove Battery (section 6)
4. Dismantle LCD (section 7)
5. Remove Electrolyte Capacitors (section 8)
PN-HW431T Dismantle Instruction
4
4. Back covers
Back cover can be removed by screw driver.
PN-HW431T Dismantle Instruction
5
5. Printed circuit boards
All PWBs can be removed by screw driver.
Main I/F PWB (1pcs) Power PWB (1pcs) LED driver PWB (1pcs)
T-CON PWB (1pcs)
6. Battery
This model uses only AAA battery for remote control.
Battery can easily be removed.
PN-HW431T Dismantle Instruction
6
7. LCD Module
- LCD Dismantle procedure
1. Remove the Brackets for touch panel mounting
2. Remove the Touch panel
3. Remove the Rear cover
4. Remove the PWBs
5. Remove the Cables
LCD
PN-HW431T Dismantle Instruction
7
8. Capacitors
Electrolyte Capacitors which diameter/height is larger than 25mm is installed on Power PWB.
These capacitors can be removed by using nipper to cut the leads.
On Power PWB
9. Parts List
Parts described in Annex VII of directive 2012/19/EU are as below.
Parts
Note
LCD
43inch LCD module
Printed Circuit Boards
Main I/F PWB
Power PWB
LED driver PWB
T-CON PWB
Battery
AAA battery
Electrolyte capacitors
(height >25mm, diameter >25mm)
On Power PWB
External electric cables
2 kinds of Power Cord
- for EU
- for UK
Table of contents
Other Sharp Monitor manuals
Sharp
Sharp PN-75HC1 User manual
Sharp
Sharp MZ-1D13 User manual
Sharp
Sharp Aquos 8M-B70AU User manual
Sharp
Sharp LV-70X500E User manual
Sharp
Sharp PN-K321H User guide
Sharp
Sharp LL-T18A1 User manual
Sharp
Sharp PN-E703 User manual
Sharp
Sharp PN-C603D User manual
Sharp
Sharp PN-V600A User manual
Sharp
Sharp PN-Y326 User manual
Sharp
Sharp PN-V550 User guide
Sharp
Sharp PN-325 User manual
Sharp
Sharp LL-T1803-H User manual
Sharp
Sharp LL-T19D1 User manual
Sharp
Sharp PN-V602A User manual
Sharp
Sharp PN-80TC3 User manual
Sharp
Sharp LL-S242A-W User manual
Sharp
Sharp PN-HW551 User manual
Sharp
Sharp LL-173C Guide
Sharp
Sharp PN-80TH5 User manual
