Shark S3601W User manual
S3601W
OWNER’S GUIDE
PRO
STEAM POCKET® MOP
WWW.SHARKCLEAN.COM
TOLL FREE: 1-800-798-7398
WHEN USING YOUR SHARK®
STEAM MOP, BASIC SAFETY
PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
STEAM MOP.
DANGER OF SCALDING.
Please use caution when
using the steam mop. The steam
emitted from the steam mop is
very hot.
POLARIZED PLUG:
This appliance has a polarized
plug (one blade is wider than
the other). As a safety feature,
this plug will fit into a polarized
outlet only one way. If the plug
does not fit fully into the outlet,
reverse the plug. If it still does
not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
1. Use the system only for its
intended use.
2. DO NOT use outdoors.
3. DO NOT leave the appliance
unattended when plugged in.
Always unplug the power cord
from the electrical outlet when not
in use and before servicing.
4. DO NOT allow the appliance to be
used by children. Close attention
is necessary when used by or near
children, pets or plants.
5. Use only as described in this
manual.
6. Use only manufacturer’s
recommended accessories.
7. DO NOT operate the appliance
with a damaged plug or cord, or
if the unit has been dropped or
damaged. To avoid the risk of
electric shock, do not disassemble
or attempt to repair the appliance
on your own. Return the appliance
to EURO-PRO Operating LLC for
examination and repair. Incorrect
re-assembly or repair can cause
a risk of electrical shock or injury
to persons when the appliance is
used.
8. To protect against a risk of electric
shock, DO NOT immerse the steam
mop into water or any other liquids.
9. DO NOT handle plug or steam
mop with wet hands or operate
appliance without shoes.
10. DO NOT pull or carry by power
cord, use power cord as handle,
close a door on the power cord, or
pull the power cord around sharp
edges or corners. Keep power cord
away from heated surfaces.
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
TOLL FREE: 1-800-798-7398
www.sharkclean.com
11. DO NOT unplug by pulling on
power cord. To unplug, grasp the
plug not the power cord. Do not
use extension cords or outlets
with inadequate current carrying
capacity.
12. DO NOT put any objects into
openings. Do not use with any
opening that is blocked.
13. DO NOT put hands or feet under
the steam mop. Unit gets very hot.
14. Use ONLY on flat, horizontal
surfaces. Do not use on walls,
counters or windows.
15. DO NOT use on leather, wax
polished furniture or floors,
synthetic fabrics, velvet or other
delicate, steam sensitive materials.
16. DO NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the
unit or make it unsafe for use. If
you live in a hard water area, we
recommend using distilled water in
your steam mop.
17. When in use, NEVER turn the
appliance over or on its side.
NEVER DIRECT STEAM TOWARDS
PEOPLE, ANIMALS OR PLANTS.
18. NEVER LEAVE THE STEAM MOP
IN ONE SPOT ON ANY SURFACE
FOR ANY PERIOD OF TIME WHEN
MICRO-FIBER PAD IS ATTACHED
AS THIS WILL DAMAGE YOUR
FLOORS.
19. Carefully remove the micro-fiber
cleaning pad immediately after you
have unplugged and allowed the
steam mop to cool.
20. When cleaning the steam mop,
unplug the power cord from the
electrical outlet and clean with a
dry or damp cloth. Do not pour
water or use alcohol, benzene or
paint thinner on the unit.
21. Extreme caution should be
exercised when using this
appliance to clean stairs.
22. Never use steam mop without
micro-fiber cleaning pad attached.
23. Keep your work area well lit.
24. Store steam mop indoors in a cool,
dry place.
25. To avoid circuit overload, do not
operate another appliance on the
same socket (circuit) as the steam
cleaner.
26. If an extension cord is absolutely
necessary, an extension cord rated
a minimum of 15 ampere, 14 gage
cord should be used. Cords rated
for less amperage may overheat.
Care should be taken to arrange
cord so that it cannot be pulled or
tripped over.
27 Always unplug and allow the steam
mop to cool before removing or
changing mop heads.
WARNING: Your steam mop
is designed to clean hard floor
surfaces that will withstand high
heat. Do not use on unsealed wood
or unglazed ceramic floors. On
surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by the
heat and steam action. It is always
recommended to test an isolated
area of the surface to be cleaned
before proceeding. We also
recommend that you check the use
and care instructions from the floor
manufacturer.
SAVE THESE
INSTRUCTIONS
TOLL FREE: 1-800-798-7398
This manual covers model number: S3601W 11
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1550 Watts
Water Capacity: 500ml (16.9 oz.)
TOLL FREE: 1-800-798-7398
1
www.sharkclean.com
Contents
Getting Started ......................................................................2
Using Your Steam Mop .......................................................5
Using Your Carpet Glider ...................................................9
Using the Accessories .........................................................10
Care of Your Steam Mop ....................................................11
Troubleshooting Guide .......................................................13
Warranty ...................................................................................17
Thank you for
purchasing
the Shark® Pro
Steam Pocket®
Mop.
2TOLL FREE: 1-800-798-7398
Getting Started
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark® Pro
Steam Pocket® Mop.
i Quick Release Swivel Cord Wrap
j Cord Clips
k Water Tank Cap
l ON/Standby Switch
m Water Tank
n Mop Head Release Button
*Phillips or flat head screwdriver can be
used. Screwdriver not included.
m
l
k
a All-Purpose Mop Head (1) and
Triangle Mop Head (1)
b Steam Mop Body
c Mop Handle
d Two-Sided Micro-Fiber Cleaning Pads
for the All-Purpose Mop Head (1),
Triangle Mop Head (1)
e Steam Concentrator
f (1) 6mm x 54mm Large Screw*
g Filling Flask
h Carpet Glider
c
f
h
b
g
d
a
n
i
j
e
TOLL FREE: 1-800-798-7398
3
www.sharkclean.com
IMPORTANT: First things first, always
make sure the mop is UNPLUGGED
from the wall when not in use.
Never fill the mop, attach the mop
head, change or remove the micro-
fiber cleaning pad when the mop is
plugged into the wall. To prolong
the life of your Shark® Pro Steam
Pocket® Mop, we recommend using
distilled water. Make sure you only
add water to the tank. Chemicals or
cleaning solution may damage the
appliance and could be unsafe for
you and your family.
ASSEMBLE
1 Insert the Mop handle end labeled
“Front” into the steam mop body.
Make sure it is inserted past the
line printed on the pole. Secure the
assembled handle and pole by using
the large screw and a Phillips or a flat
head screwdriver (screwdriver not
included). (fig. 1)
fig. 1
4TOLL FREE: 1-800-798-7398
Getting Started - cont’d
IMPORTANT: Don’t use on unsealed
wood or unglazed ceramic floors.
On surfaces that have been treated
with wax or some no wax floors,
the sheen may be removed by
the heat and steam action. It is
always recommended to test an
isolated area of the surface to be
cleaned before proceeding. We
recommend that you check the use
and care instructions from the floor
manufacturer.
2 Use the lavender loop on the side of
the micro-fiber cleaning pad to slide
mop head into pad pocket. Then
secure the quick fasteners on the top
of the pocket to lock in place. (fig. 2)
3 Snap the mop head into the base to
secure it. (fig. 3)
4 Turn the water tank cap counter
clockwise and remove from the tank.
(fig. 4)
Use the filling flask and pour water
into the tank. Please don’t overfill.
Replace the cap on the water tank.
(fig. 5)
fig. 2
fig. 3
fig. 4
fig. 5
TOLL FREE: 1-800-798-7398
5
www.sharkclean.com
IMPORTANT: Your Steam Mop needs
water to make steam! Never use your
steam mop without water in the tank.
Sweep or vacuum your floors prior to
cleaning with your Steam Mop.
Visit www.sharkclean.com for other
great quick cleaning products to
complement your Steam Mop, such
as the Shark® Navigator™
(model NV350).
1 Pull and twist the quick release cord
holder to unwrap the power cord
completely. Plug into a 120-volt
electrical outlet. (fig. 6)
2 The ON/STANDBY switch will
flash blue. If the light does not turn
on, reference the troubleshooting
section on page 13. (fig. 7)
IMPORTANT: Make sure you don’t
use the mop without attaching a
micro-fiber cleaning pad and adding
water to the tank first. When you are
using the mop for the first time, it
might take longer than the normal 30
seconds to start steaming.
Using Your Steam Mop
fig. 6
fig. 7
6TOLL FREE: 1-800-798-7398
Using Your Steam Mop - cont’d
3 Press the ON/STANDBY button once
for dust setting (DUST lighted setting
indicator will illuminate). DUST setting
is light steam for a quick dusting and
best dry time. (fig. 8)
Press the ON/STANDBY button
a second time to activate the
MOP setting. MOP setting is for
normal, everyday steam cleaning.
(fig. 9)
Press the ON/STANDBY button
a third time to activate the SCRUB
setting. SCRUB setting is for heavy
cleaning and will leave floors damp.
To better understand which steam
setting to use for your cleaning task,
turn to page 7.
4 Clean your floors with a forward and
backward motion. (fig. 10)
Press the ON/STANDBY button until
the light flashes to stop the steam.
fig. 8
fig. 10
fig. 9
Table of contents
Other Shark Steam Mop manuals
