SGM G-SPOT User manual

G‐SPOT
MOVINGHEAD
Manual_G_Spot_EN_170x113,3.book Page 1 Tuesday, June 9, 2015 10:22 AM

2
Dimensions
135°
270° 270°
805
(31.7)
646
(25.4)
494
(19.5)
144
(5.7)
327
(12.9)
821
(32.3)
Min. c/c
764
(30.0)
492
(19.4)
470
(18.5)
664
(26.2)
135°
340
(13.4)
370
(14.6)
16 (0.63)
37 (1.46)
Measurements in millimetres
and inches (in parentheses).
Drawing not to scale.
Manual_G_Spot_EN_170x113,3.book Page 2 Tuesday, June 9, 2015 10:22 AM

3
G‐SPOT
USERMANUAL
© 2015 SGM®. Information subject to change without notice. SGM and all
affiliated companies disclaim liability for any injury, damage, direct or indirect loss,
consequential or economic loss or any other loss occasioned by the use of,
inability to use or reliance on the information contained in this manual.
The SGM logo, the SGM name and all other trademarks in this document
pertaining to services or products by SGM or its affiliates and subsidiaries are
trademarks owned or licensed by SGM or its affiliates or subsidiaries.
The original edition of this document is in English. All other language editions are
translations of the original edition.
This edition applies to firmware version 1.00 or later.
Ver. F
Manual_G_Spot_EN_170x113,3.book Page 3 Tuesday, June 9, 2015 10:22 AM

4
Dimensions ................................................................................................................... 2
Safety information ......................................................................................................... 7
Overview ..................................................................................................................... 10
Unpacking ................................................................................................................... 11
Transportation ..........................................................................................................................................................11
Installation / Rigging .................................................................................................... 12
Connecting AC power ................................................................................................. 14
Control panel operations ............................................................................................. 15
Using the control panel ............................................................................................................................................15
DMX start address ...................................................................................................................................................15
Selecting module (G-Spot or G-Profile) ...................................................................................................................15
Configuring the device using an Android telephone via RFID..................................................................................16
Connecting to a DMX control device ........................................................................... 17
Contents
Manual_G_Spot_EN_170x113,3.book Page 4 Tuesday, June 9, 2015 10:22 AM

5
Configuring the device for DMX control ...................................................................... 18
About DMX...............................................................................................................................................................18
Setting the DMX address .........................................................................................................................................18
Control panel menus ................................................................................................... 19
Gobo replacement ....................................................................................................... 28
Identification of gobo wheel......................................................................................................................................28
Replacing rotating gobos .........................................................................................................................................29
How to replace a gobo in a gobo holder ..................................................................................................................30
Maintenance ................................................................................................................ 31
Upgrading the firmware............................................................................................................................................31
Cleaning ...................................................................................................................................................................31
DMX protocols ............................................................................................................. 32
24 Channel Mode (Standard)...................................................................................................................................32
30 Channel Mode (Extended) ..................................................................................................................................44
Full Color Calibration and Color Temperature Correction........................................................................................56
Manual_G_Spot_EN_170x113,3.book Page 5 Tuesday, June 9, 2015 10:22 AM

6
Effects ......................................................................................................................... 57
Two independent rotating gobo wheels ................................................................................................................... 57
Effect wheels ........................................................................................................................................................... 57
High-precision pan and tilt ....................................................................................................................................... 57
Ultra high-speed strobe effect.................................................................................................................................. 57
Prism........................................................................................................................................................................ 57
Frost......................................................................................................................................................................... 57
Fixtures and accessories ............................................................................................ 58
Included items.......................................................................................................................................................... 58
Ordering information ................................................................................................................................................ 58
User’s notes ................................................................................................................ 60
Manual_G_Spot_EN_170x113,3.book Page 6 Tuesday, June 9, 2015 10:22 AM

7
Safety information
The G-SPOT is intended for professional use only. It is not suitable for household use. Impropre a l’usage domestique.
Review the following safety precautions carefully before installing or operating the fixture. This product must be installed in
accordance with the applicable installation code by a person familiar with the construction and operation of the product and
the hazards involved. Ce produit doit être installé selon le code d’installation pertinent, par une personne qui connaît
bien le produit et son fonctionnement ainsi que les risques inhérent.
Preventing electric shock
• Always power off/unplug the fixture before removing covers or dismantling product.
• Ensure that the mains power is off when wiring the fixture to the AC mains supply.
• Ensure that the fixture is electrically connected to earth (ground).
• Do not apply power if the fixture is in any way damaged.
• Do not immerse the fixture in water or liquid.
WARNING! Read the safety precautions in this section before
unpacking, installing, powering or operating this product.
WARNING! Risk of electric shock.
Manual_G_Spot_EN_170x113,3.book Page 7 Tuesday, June 9, 2015 10:22 AM

8
Preventing burns and fire
• Install in a location that prevents accidental contact with the fixture.
• Install only in a well-ventilated space.
• Install at least 0.3 m (12 in.) away from objects to be illuminated.
• Install only in accordance with applicable building codes.
• Ensure a minimum clearance of 0.1 m (4 in.) around the cooling fans.
• Do not paint, cover or modify the fixture.
• Keep all flammable materials away from the fixture.
• Allow the fixture to cool for 15 minutes after operation, before touching it.
CAUTION: Exterior surface temperature after 5 min. operation = 55° C (131° F). Steady state = 65° C (149° F)
WARNING! Take measures to prevent burns and fire.
Manual_G_Spot_EN_170x113,3.book Page 8 Tuesday, June 9, 2015 10:22 AM

9
Avoid personal injury
• Do not look directly at the light source from close range.
• Take precautions to prevent injury when working at height.
• Ensure that the fixture is always securely fastened with suitable hardware.
• For elevated installations, secure the fixture with suitable safety cables, and always comply with relevant load
dimensioning, safety standards and requirements.
WARNING! Take measures to prevent personal injury.
Manual_G_Spot_EN_170x113,3.book Page 9 Tuesday, June 9, 2015 10:22 AM

10
Overview
J
I
H
F
K
E
FC
A
C
D
G
B
The SGM G-Spot model is a maintenance free, multi-environmental fixture with an
IP-rating of 65. It has a powerful LED light source, and a virtually unlimited color palette,
two independent rotating gobo wheels and can easily be controlled by wired and wireless
DMX. The fixture also offers RFID and NFC, low power consumption and an expected
lifetime of the multiple LED’s of 50,000 hours*.
A : Pan lock
B:Tiltlock
C : Base handle
D : Head fan grill (one of two shown)
E : Display panel
F : Safety wire attachment point
G:Fuse
H:DMXin
I : DMX out
J:Powerin
K : Power cord
* At 70% of luminous output under the manufacturer’s test conditions.
Manual_G_Spot_EN_170x113,3.book Page 10 Tuesday, June 9, 2015 10:22 AM
Other manuals for G-SPOT
2
This manual suits for next models
1
Table of contents
Other SGM Lighting Equipment manuals

SGM
SGM Giotto spot 1200 User manual

SGM
SGM G-1 BEAM User manual

SGM
SGM P-6 User manual

SGM
SGM X Line IDEA WASH 575 User manual

SGM
SGM P-1 User manual

SGM
SGM P-3 User manual

SGM
SGM G-4 RGBAM WASH User manual

SGM
SGM IDEA BEAM 300 User manual

SGM
SGM Flasher DMX 1.5 User manual

SGM
SGM Giotto WASH 1200 User manual
Popular Lighting Equipment manuals by other brands

Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric
Commercial Electric 54568141 Use and care guide

CREE LIGHTING
CREE LIGHTING 304 Series installation instructions

Goobay
Goobay 49867 user manual

ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual

Alkalite
Alkalite Krypton KT-81 user manual

























