SentrySafe Fire-Safe User manual

P44621

Model No.

Modèle Nº

Modelo No.

Serial No.

Nº de série

No. de serie

Dial Combination (Not All Models)

Combinaison du cadran

(pas tous les modèles)

Combinación del disco

(No todos los modelos)

Key No. (Not All Models)

Clé Nº (pas tous les modèles)

Llave No. (No todos los modelos)

Factory Code (Not All Models)

Code d’usine (pas tous les modèles)

Código de fábrica

(No todos los modelos)

➧

IMPORTANT

If you experience any problems or challenges with your safe, please contact us.

Many issues can be resolved quickly.

IMPORTANT

Si vous rencontrez des problèmes ou des difficultés avec votre coffre-fort, s’il vous plaît

contactez-nous. De nombreux problèmes peuvent être résolus rapidement.

IMPORTANTE

Si experimenta cualquier problema o dificultad con su seguro, por favor póngase en contacto con

nosotros. Muchos problemas pueden ser resueltos rápidamente.

SentrySafe

Customer Service: 1-800-828-1438

Mexico Customer Service: 01-800-451-0821

www.sentrysafe.com

®2016

Master Lock Company LLC

Milwaukee, Wisconsin 53210 U.S.A.

www.masterlock.com

Fire-Safe®Owner’s Manual

WARNING

Gun warning

This product is not intended for the secure storage of all materials. Items such as ﬁrearms, other

weapons, combustible materials, or medication should NOT be stored in this unit.

NOTICE

Do NOT store delicate items directly in your safe.

SentrySafe products which offer ﬁre protection have a proprietary insulation that has a high

moisture content. In addition, the SentrySafe advanced safes close airtight to offer water resistance,

which may also cause moisture to accumulate inside your safe. The desiccant packet included in

your safe during shipment should be left in your safe. DO NOT DISCARD IT. It is intended to help

absorb moisture which may accumulate inside your safe. Please open your unit once every two

weeks to avoid moisture accumulation.

If you choose to store delicate items such as jewelry with working parts, watches, stamps, or

photos in your safe, we recommend putting them in an air-tight container, prior to placing them in

the safe for storage.

NOTE: SentrySafe will not be responsible for any damage or loss of items placed in the unit due to

moisture.

Do NOT store pearls in this safe.

In the event of a ﬁre, potential damage to delicate pearls occurs at temperatures much lower

than the 350°F interior performance measure which the UL classiﬁcation performance standard

indicated guarantees. Therefore, DO NOT store pearls in your SentrySafe product.

Do NOT store computer disks, audio-visual cassettes or photo negatives.

This product is not intended to protect computer ﬂoppy or diskettes, cartridges and tapes, audio or

video cassettes or photo negatives.

Your safe is only part of your total security protection.

SentrySafe recommends that you store your safe in closets, ofﬁces, basements, bedrooms and any

other locations that are convenient for you but out of direct line of sight from prying eyes. The

location of the safe does not affect the safe’s ability to protect your valuables inside.

English

Table of Contents

Registration:

www.registermysafe.com

Reasons to register

By registering your SentrySafe product you can easily retrieve forgotten codes and combinations.

By registering your SentrySafe product you can be sure that in the unfortunate circumstance of a

ﬁre you will be guaranteed your replacement safe (provided ofﬁcial paperwork).

English

Warnings ..............................................................................................................2

Registration ..........................................................................................................3

Mechanical Combination Lock...............................................................................4-5

Programmable Electronic Lock...............................................................................6-9

Operating the Light ...............................................................................................9

Operating Sound Features .....................................................................................10

Bolting Down Your Safe.........................................................................................11-12

Troubleshooting ....................................................................................................13

Replacement & Fire Speciﬁcations..........................................................................14

Customer Service...................................................................................................15

Français .................................................................................................... 17

Español...................................................................................................... 33

IMPORTANT

If you experience any problems or challenges with your safe, please contact us.

Many issues can be resolved quickly without the product being returned.

Our customer care team is available at 1-800-828-1438 to answer your questions.

NOTE: • Store combination (and keys if equipped) in a secure

location (other than in the safe).

• Combination can not be changed.

1Ensure any shipping screws have been removed. Located on

the inside of the door.

NOTE: Your unit may or may not have a shipping screw..

• DO NOT RETURN! Questions or concerns, call us at

1-800-828-1438.

2Find your combination on the back of this owner’s manual.

FOR DUAL KEY/COMBINATION LOCKS ONLY

Keys are located inside your safe. Be sure to remove them

before locking your safe.

WARNING

Test your combination several times before putting valuables inside.

1FOR DUAL KEY/COMBINATION LOCKS ONLY,insert key into

the lock, turn to the ’unlocked’ position, then remove the key.

This is a secondary locking feature not an override key.

Rotate dial to ’0’, then rotate right (clockwise)

passing ’0’ three times, continue rotating until you reach the

ﬁrst number in your combination.

3Rotate dial to the left (counterclockwise). Go PAST the second

number of your combination ONCE and stop the SECOND time

the dial reaches the number.

Mechanical Combination Lock

M100TEST

SN100TEST01*

10-22-33 RLR

2075

Preparing your safe for ﬁrst time use

Unlocking your safe

English

4Rotate the dial to the right (clockwise), stop when you reach

the third number in your combination.

5Rotate the handle downward to open the door.

This may take a limited amount of force if you have a

water-resistant safe.

NOTE: • Make sure the handle is rotated all the way up in the horizontal position before

unlocking the safe.

• If the door does not open easily, repeat steps 1-5.

• If you exert too much force on the handle, the handle will move without moving the

bolts. If this happens, you will hear a ’click.’ DO NOT be alarmed. This feature is

designed to protect the bolts from being overpowered by force. If this occurs, simply

exert force in the opposite direction (lifting up) until the handles ’clicks’ back into place

and repeat steps 1-5 to open your safe.

1Close the door and pull the handle upward until the handle

is horizontal.

For water-resistant units, additional pressure to the front,

left side of the door may need to be applied prior to rotating

the handle.

2Spin the dial at least 2x to the right (clockwise).

3FOR DUAL KEY/COMBINATION LOCKS ONLY, insert key

into the lock, turn to the ’locked’ position, then remove the key.

Locking your safe

NOTE: • Store code (and keys if equipped) in a secure location

(other than in the safe).

1Ensure any shipping screws have been removed. Located on

the inside of the door.

NOTE: Your unit may or may not have a shipping screw.

• DO NOT RETURN! Questions or concerns, call us at

1-800-828-1438.

2ASlide out the battery drawer on the side of the keypad.

BInsert 4 AAA alkaline batteries (not included).

NOTE: Do not use rechargeable batteries or any other type

of non-alkaline battery. Do not mix old and new

batteries. Do not mix alkaline and standard batteries.

CSlide battery drawer back into keypad.

3Find your code on the back of this owner’s manual.

FOR DUAL KEY/COMBINATION LOCKS ONLY

Keys are located inside your safe. Be sure to remove them

before locking your safe.

WARNING

Test your code several times before putting valuables inside.

1FOR DUAL KEY/ELECTRONIC LOCKS ONLY, insert key into

the lock, turn to the ’unlocked’ position to open the safe, then

remove the key.

This is a secondary locking feature not an override key.

Programmable Electronic Lock

Preparing your safe for ﬁrst time use

Unlocking your safe

M100TEST

SN100TEST01*

12345

English

2AEnter the 5 digit factory code found on the back of the

owner’s manual.

NOTE: You may have to lift the handle while entering the

combination.

BA green light will indicate the code is correct. You will have

4 seconds to turn the handle to unlock your safe.

3Rotate the handle downward to open the door.

This may take a limited amount of force if you have a water-

resistant safe.

NOTE: • Make sure the handle is rotated all the way up in the horizontal position before

unlocking the safe.

• If you exert too much force on the handle, the handle will move without moving the

bolts. If not when this happens, you will hear a ’click.’ DO NOT be alarmed. This feature

is designed to protect the bolts from being over powered by force. If this occurs, simply

exert force in the opposite direction (lifting up) until the handles ’clicks’ back into place

and repeat steps 1-3 to open your safe.

• Delay mode will occur if three consecutive invalid entries have been tried. Red LED will

blink on and off to let you know the safe is in delay mode. This will cause the system

to shutdown for two minutes. DO NOT remove the batteries to restart the system it will

only increase the length of time for the system shutdown.

1Close the door and pull the handle upward until the handle is

horizontal.

For water-resistant units, additional pressure to the front,

left side of the door may need to be applied prior to rotating

the handle.

2FOR DUAL KEY/ELECTRONIC LOCKS ONLY, insert key into

the lock, turn to the ’locked’ position, then remove the key.

NOTE: If your safe does not appear to be working properly,

please check to make sure you are using NEW

alkaline batteries before contacting SentrySafe

Customer Service.

Locking your safe

Three code options:

Factory code:

The safe will ALWAYS unlock using this 5 digit code (found on the

back of the owner’s manual). This code cannot be deleted.

User code:

A 5 digit programmable code of your choosing that can be changed

or deleted.

Secondary code:

A second 5 digit programmable code of your choosing that can be

changed or deleted. Can only be programmed after a user code

has been activated.

NOTE: • The “C” key is a clear key. This can be used at anytime to clear the system and return to

standby mode – unless you are in delay mode (3 consecutive invalid entries).

• The 5 digit factory code cannot be deleted. However, you may add and delete

additional codes.

This safe can store up to three codes at one time. One factory code and two

additional programmable codes.

Programmable Electronic Lock

Programming information

Programming the user code

Programming the secondary code

To ADD a user code:

1Press the “P” key.

2Enter the 5 digit factory code found on the back of your owner’s manual.

3The light will ﬂash green and then you will have ﬁve seconds to enter your own

personal 5 digit user code.

To DELETE a user code:

1Press the “P” key.

2Enter the 5 digit factory code.

3Enter 0,0,0,0,0.

NOTE: • The electronic lock will NOT indicate that it has deleted the user code – please test the

code to make sure it has been deleted.

To ADD a secondary code:

1Press the “P” key two times.

2Enter the 5 digit user code previously programmed.

English

3The light will ﬂash green and then you will have ﬁve seconds to enter your own

personal 5 digit secondary code.

To DELETE a secondary code:

1Press the “P” key two times.

2Enter the 5 digit user code.

3Enter 0,0,0,0,0.

NOTE: • The electronic lock will NOT indicate that it has deleted the secondary code – please

test the code to make sure it has been deleted.

The safe you have purchased may include a light. This is a long-lasting LED light. Not all safes

include a light.

The batteries that operate the keypad are the same batteries that

operate the light. If the light in your unit does not turn on, please

change your batteries. Refer to page 6 to change the batteries.

The light will turn on every time you enter your code and will remain on

for 30 seconds. The light duration has three options – off, 30 seconds,

and 60 seconds.

To turn the light off:

1Press the “0” button.

2Press the “P” button.

3Press the “3” button.

To turn the light on for 30 seconds:

1Press the “0” button.

2Press the “P” button.

3Press the “4” button.

To turn the light on for 60 seconds:

1Press the “0” button.

2Press the “P” button.

3Press the “5” button.

NOTE: • If the light duration is 60 seconds, the battery life will be reduced at a faster rate.

How to operate the light

Other manuals for Fire-Safe

Table of contents

Other SentrySafe Safe manuals

SentrySafe

SentrySafe SF123ES User manual

SentrySafe

SentrySafe Fire-Safe SFW123DSB User manual

SentrySafe

SentrySafe H060ES User manual

SentrySafe

SentrySafe CHW30300 User manual

SentrySafe

SentrySafe DH-109E User manual

SentrySafe

SentrySafe EF3428E User manual

SentrySafe

SentrySafe Security Safe Series User manual

SentrySafe

SentrySafe Fire-Safe SFW205GQC User manual

SentrySafe

SentrySafe Master Lock Fire-Safe FPW082FS User manual

SentrySafe

SentrySafe Home Defense Center User manual

SentrySafe

SentrySafe P44721 User manual

SentrySafe

SentrySafe X055 User manual

SentrySafe

SentrySafe QAP1E User manual

SentrySafe

SentrySafe P008E User manual

SentrySafe

SentrySafe EF4738E User manual

SentrySafe

SentrySafe Fire-Safe User manual

SentrySafe

SentrySafe P005K User manual

SentrySafe

SentrySafe P005K User manual

SentrySafe

SentrySafe F2300 User manual

SentrySafe

SentrySafe PL048E User manual

SentrySafe

SentrySafe Quick Access Pistol User manual

SentrySafe

SentrySafe Fire-Safe User manual

SentrySafe

SentrySafe P008E User manual

SentrySafe

SentrySafe T8-331 User manual

Popular Safe manuals by other brands

Squire

Squire Stronghold Keysafe Fitting instructions

Phoenix

Phoenix FS0352C Instructions & Guarantee Registration

Phoenix

Phoenix KS0030E Series operating instructions

Vaultek

Vaultek 10 Series Quick setup

Arregui

Arregui CLASS operating instructions

Beaumont

Beaumont SMART KEYBOX user guide

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe user guide

Hornady

Hornady SnapSafe Trunk Safe II owner's manual

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO instruction manual

Honeywell

Honeywell 5912 user guide

Phoenix

Phoenix FS1280F operating instructions

Phoenix

Phoenix SS0992K Instructions & Guarantee Registration

Technomax

Technomax Trony Series Instruction handbook

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series instruction manual

RICHTER CZECH

RICHTER CZECH LA Instructions for use and installation

Olymp

Olymp GOsafe 110 operating instructions

Phoenix

Phoenix SS0100E Operating Instructions & Guarantee Registration

Clarke

Clarke Strong-Arm CS1000K Operation & maintenance instructions