Sentiotec CP-RM-HSR-4S Guide

INSTRUCTIONS

FOR INSTALLATION

English

Version 03/21 Ident no Y05-1048

Concept R mini

Auxiliary evaporator R

Heater railing

BRACKET SET

CP-RM-HSR-4S

Suitable for the following models:

CP-RM-35 CP-25-STP-B

CP-RM-45

CP-RM-60

Table of Contents

1. About this instruction manual 2

2. Important information for your safety 3

2.1. Intended use 3

2.2. General safety information 3

3. Scope of delivery 4

4. Optional accessories 4

5. Installation 5

5.1. Installing the railing bracket 5

5.2. Installing wooden parts on the mounting bracket 7

5.3. Installing the railing 8

6. Disposal 8

1. About this instruction manual

Read these installation instructions carefully and keep them within reach of the

product. This ensures that you can refer to information regarding your safety and

the installation at any time.

Symbols

Symbols and signal words are used in these installation instructions which have

the following meanings:

ATTENTION!

This keyword is a warning that damage to property can occur.

Instructions for installation p. 3/8

2. Important information for your safety

2.1. Intended use

The CP-RM-HSR-4S bracket set allows a wooden railing to be fastened to the

Concept R mini sauna heater and to the auxiliary evaporator R black.

Depending on requirements, you can put together the heater railing in the sha-

pe of an L, U or O.

Any use exceeding this scope is considered improper use. Improper use can

result in injuries and damage to the product.

The CP-RM-HSR-4S bracket set is suitable for the following railing models:

2.2. General safety information

Item number Description Suitable heater /

evaporator models

CP-RM-L-4S LINDEN

wooden railing CP-RM-35 / RM-45 /

CP-RM-60 /

CP-25-STP-B

CP-RM-N-4S WALNUT

wooden railing

●Remove any residual packaging from the bracket. It could ignite during operation

of the sauna heater/evaporator.

● Install the railing bracket and the nished railing using a normal screwdriver.

The product may be damaged by use of a cordless drill.

●For your own safety, consult your supplier in the event of problems that are

not described in su󰀩cient detail in the user instructions.

Instructions for installation p. 4/8

●2 pcs. mounting bracket, long

●8 pcs. rounded head screw (M 4 x 8 mm)

●40 pcs. wood screw (3,5 x 13 mm)

4. Optional accessories

Holzreling (CP-RM-L-4S, CP-RM-N-4S)

3. Scope of delivery

●4 pcs. angle railing bracket

2 pcs. side panel 1 pcs. wooden panel,

long

1 pcs. wooden panel,

short

●2 pcs. railing bracket, short

67 8

●4 pcs. corner bracket●2 pcs. mounting bracket, short

Instructions for installation p. 5/8

5. Installation

Remove the ceramic bowl from the evaporator.

ATTENTION!

Damage to the product

The product may be damaged by use of a cordless drill.

●Use a normal screwdriver to install the railing bracket.

Remove the screws Ausing

a screwdriver. Remove the

two cover plates B.

Step 1

Remove the screws Cand

remove the cover frame D.

Step 2

5.1. Installing the railing bracket

Instructions for installation p. 6/8

Remove the screws Eand use

them to install the angle railing

brackets 1. Depending on the

preferred form of the heater rail-

ing, you need two or four angle

failing brackets.

Step 3

Use the screws Cto install

the two short railing brackets 2

and the cover frame D.

Step 4

Step 5

Install the two cover plates B

using the screws A.

Instructions for installation p. 7/8

Step 6

5.2. Installing wooden parts on the mounting bracket

To do this, use the wood screws provided.

Depending on requirements, you can put together the heater railing in the shape

of an L, U or O. To do this, use the wood screws provided.

Step 7

Screw the side panel 6 of the wood railing ush with the side panel 3of

the bracket. If necessary, repeat this procedure on the opposite side.

Connect the side panel 3of the bracket to the long bracket panel 5with

the help of the corner bracket 4. If necessary, repeat this procedure on the

opposite side.

Screw the long wooden railing panel 8and the short wooden railing panel

7to the bracket panel 5. Make sure that it is ush with the side panel 6

of the wood railing.

Instructions for installation p. 8/8

Place the assembled heater

railing on the railing bracket

and a󰀩x it with the supplied

rounded head screws.

Thread the heater railing

carefully over the cover to

avoid scratching the surface.

5.3. Installing the railing

ATTENTION!

Damage to the product

The product may be damaged by use of a cordless drill.

●Use a screwdriver to install the railing.

6. Disposal

●Please dispose of packaging materials in accordance with the ap-

plicable disposal regulations.

●Used products contain reusable materials and hazardous sub-

stances. Therefore, do not dispose of your used product with

household waste, but do so in accordance with the locally ap-

plicable regulations.

Step 8

MONTAGEANWEISUNG

Deutsch

Version 03/21 Ident-Nr. Y05-1048

Concept R mini

Zusatzverdampfer R

Ofenreling

HALTERUNGSSET

CP-RM-HSR-4S

Passend für folgende Modelle:

CP-RM-35 CP-25-STP-B

CP-RM-45

CP-RM-60

Inhaltsverzeichnis

1. Zu dieser Anleitung 2

2. Wichtige Hinweise zu Ihrer Sicherheit 3

2.1. Bestimmungsgemäßer Gebrauch 3

2.2. Allgemeine Sicherheitshinweise 3

3. Lieferumfang 4

4. Optionales Zubehör 4

5. Montage 5

5.1. Relinghalterung montieren 5

5.2. Holzteile auf Befestigungswinkel montieren 7

5.3. Reling montieren 8

6. Entsorgung 8

1. Zu dieser Anleitung

Lesen Sie diese Montageanweisung gut durch und bewahren Sie sie in der Nähe

des Produktes auf. So können Sie jederzeit Informationen zu Ihrer Sicherheit

und zur Montage nachlesen.

Symbole

In dieser Montageanweisung werden Symbole und Signalwörter verwendet, die

folgende Bedeutungen haben:

ACHTUNG!

Dieses Signalwort warnt Sie vor Sachschäden.

This manual suits for next models

Table of contents

Languages:

Other Sentiotec Heater manuals

Sentiotec

Sentiotec Concept R mini CP-RM-75 User manual

Sentiotec

Sentiotec 145 User manual

Sentiotec

Sentiotec Concept R User manual

Sentiotec

Sentiotec DIR-350-R User manual

Sentiotec

Sentiotec Concept R mini combi CP-RMC-35 User manual

Sentiotec

Sentiotec ECO-350-G User manual

Sentiotec

Sentiotec Concept R mini Series User manual

Sentiotec

Sentiotec HWO-035NS-P User manual

Sentiotec

Sentiotec IR-WP-175 Operator's manual

Sentiotec

Sentiotec Concept R combi User manual

Sentiotec

Sentiotec VITAE 350 User manual

Sentiotec

Sentiotec Onni Mini User manual

Sentiotec

Sentiotec TH6-VR Guide

Sentiotec

Sentiotec HOME Premium Combi User manual

Sentiotec

Sentiotec Concept R CP-RC-AF User manual

Sentiotec

Sentiotec Home fin HOME-F45 User manual

Sentiotec

Sentiotec IKI Monolith MLT-138NS User manual

Sentiotec

Sentiotec Concept R User manual

Sentiotec

Sentiotec HOME Premium Fin User manual

Sentiotec

Sentiotec Qube Series User manual

Sentiotec

Sentiotec QUBE-MA User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide