Sennheiser SL MIC HUB 1 User manual
FEATURES
Can connect up to 4 microphones
Can connect mute and hook switch
Plug & play connection
Bundles up 4 audio signals into a standard
Cat5 cable
Distributes logic signals to TeamConnect
Combox
Can be cascaded
ARCHITECT’S
SPECIFICATIONS
A microphone hub for connecting up to four
Sennheiser SpeechLine microphones and
bundling the microphone cables into one,
thus significantly reducing the amount of
cables required in a TeamConnect conferenc-
ing system.
Audio signals from the SpeechLine micro-
phones shall be distributed from the hub to
the TeamConnect central unit via a single
Cat5 cable while logic signals shall be sent
directly from the hub to the TeamConnect
combox using a 6-wire cable with a 6-pin
terminal connector on each end.
The hub shall be “plug and play” without the
need for an external power supply. The hub
shall feature four microphone inputs (5-pin
terminal) and an audio output (RJ-45) for
connecting to the TeamConnect central unit.
The pin allocation of the microphone inputs
shall be as follows: pin 1: microphone mute
control, pin 2: microphone mute status, pin 3:
ground, pin 4: audio +, pin 5: audio –.
The hub shall be equipped with two GPIO
ports (6-pin terminal): one for connecting to
the TeamConnect combox and one for either
daisy-chaining a second hub or for connect-
ing an external hook button.
The SL Mic Hub 1 simplifies the cabling for integrated audio conference sys-
tems. It reduces the amount of cables that have to be integrated by a significant
amount by bundling up the audio signals into a single Cat 5 cable.
TECHNICAL DATA
Housing .....................................................................metal
Dimensions...............................................................14,4 (5.67") x 7,63 (3")
x 3,15 cm (1.24")
PORTS
4x Mic.........................................................................5-pol Terminal connector
2x Connect/Status..................................................6-pol Terminal connector
1x Mute .....................................................................7-pol Terminal connector
1x Audio....................................................................RJ45
POWER SUPPLY
The SL Mic Hub 1 ist connected to the TeamConnect Combox CB1 via a 6-pin
terminal connector cable. The Combox delivers the necessary power supply to
operate the bi-color status LEDs of the mute button MAS 1 TC and the hook but-
ton MAS 2 TC. The Combox supplies sufficient power for up to 5 MAS 1/2 buttons.
If you want to use more than 5 buttons in your setup, you need to connect an
external power supply (5 V, >100 mA, recommended Sennheiser Power supply
Art.-No. 534480) to pin 6 and 7 of the MUTE socket.
DELIVERY INCLUDES
1 SL Mic Hub 1
1 Control cable 3 m, 6-pin / 6-pin Terminal connector
1 Adapter cable 30 cm, RJ 45 / 12-pin Terminal connector
Leaflet
SL Mic Hub 1 Microphone Hub
Continued on page 2
DIMENSIONS
SL Mic Hub 1 Microphone Hub
The pin allocation of the GPIO ports shall be as follows: pin 1: microphone mute control, pin 2: microphone mute status, pin 3: on/off
hook control, pin 4: on/off hook status, pin 5: 5 V DC power supply, pin 6: ground. The hub shall also have one 7-pin terminal for con-
necting a global mute button, which shall add a mute capability to Sennheiser in-table mics without mute button. If more than one
global mute button is used, they shall be connected in parallel to the same 7-pin terminal and an external 5 V DC power supply must
be connected to pin 6 and 7. The pin allocation of the 7-pin terminal shall be as follows: pin 1: 5 V DC power supply (DC OUT), pin 2:
microphone mute control, pin 3: red LED, pin 4: green LED, pin 5: ground, pin 6: 5 V DC power supply (DC IN, not used), pin 7: ground
(not used).
The microphone hub shall be the Sennheiser SL MIC HUB 1.
ARCHITECT’S
SPECIFICATIONS
SL Mic Hub 1
300 mm
RECOMMENDED ACCESSORIES
MEB114-S TC B Art. No. 506600
MEB114-S TC W Art. No. 506601
MEB114-S TC G Art. No. 506602
MEB104-L TC B Art. No. 506730
MEB 104-L TC W Art. No. 506765
MEB 104-L TC G Art. No. 506766
MEB 102-L TC B Art. No. 506729
MEB 102-L TC W Art. No. 506763
MEB 102-L TC G Art. No. 506764
MAS 1 TC B Art. No. 506722
MAS 1 TC W Art. No. 506723
MAS 1 TC G Art. No. 506724
MAS 2 TC B Art. No. 506603
MAS 2 TC W Art. No. 506604
MAS 2 TC G Art. No. 506605
TeamConnect System EU Art. No. 506235
TeamConnect System UK Art. No. 506236
TeamConnect System US Art. No. 506237
SL Mic Hub 1 Microphone Hub
DIMENSIONS
SL Mic Hub 1
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Contact your local Service Partner:
08/14 Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com. Copyright © 05/2013. All rights reserved. Errors and omissions excepted.
Quick Guide
Safety Guide
EN
DE
FR
ES
IT
NL
RU
ZH
JA
KO
Quick Guide
Safety Guide
EN
DE
FR
ES
IT
NL
RU
ZH
JA
KO
Quick Guide
Safety Guide
EN
DE
FR
ES
IT
NL
RU
ZH
JA
KO
Quick Guide
Safety Guide
EN
DE
FR
ES
IT
NL
RU
ZH
JA
KO
Quick Guide
Safety Guide
EN
DE
FR
ES
IT
NL
RU
ZH
JA
KO
MEB 102-L TC MEB 104-L TC MAS 1 TC MAS 2 TC SL MIC HUB 1
CONTROL / STATUS socketsSL MIC HUB 1 MIC 1 - MIC 4 sockets MUTE socket
Package contents | Lieferumfang | Contenu | Dotazione | Volumen de suministro | Omvang levering | Комплект поставки | 供货范围 | パッケージの内容 | 패키지 내용물
Connecting the components | Die Komponenten anschließen | Connecter les composants | Connettere i componenti | Conectar los componentes | Conectar los componentes | De componenten aansluiten | Подключение блоков |
连接组件 | 製品の接続 | 구성품 연결
A:
B:
1x SL MIC HUB 1
4x MEB 102-L /
4x MEB 104-L
1x MAS 1 TC
1x MAS 2 TC
2x SL MIC HUB 1
8x MEB 102-L /
4x MEB 104-L
2x MAS 1 TC
1x MAS 2 TC
XLR-5 TC
AB
1 - 4 microphones 5 - 8 microphones
1
2
3
4
5
6
7
+5V out
mute
red
green
ground
+5V in
ground
1 2 3 4 5 6
1
2
3
4
5
6
mute
mute status
hook
hook status
+5V
ground
1
2
3
4
5
mute
mute status
ground
audio +
audio - 1 2 3 4 5 61 2 3 4 5 7
SL MIC HUB 1
Combox
Mic
Central Unit
Mic Terminal
Mic
MAS 1 TC
A: MAS 2 TC
B: SL MIC HUB 1
for external
power supply
Other Sennheiser Switch manuals
